Oregon Scientific Clock RM383PA User Manual

To enable / disable signal reception:  
Horloge de projection atomique à  
éclairage ambiant  
SPECIFICATIONS  
TYPE  
Press and hold  
reception.  
to enable or  
to disable signal  
DESCRIPTION  
Modèle: RM383PA  
85 x 60 x 87 mm  
(3.35 x 2.36 x 3.43 in)  
170 g (6 oz) without battery  
AC/DC 3V adaptor  
2 x UM-4 (AAA) 1.5 V batteries  
L x W x H  
NOTE Reception takes 2-10 minutes. If the signal is weak,  
it can take up to 24 hours to get a valid signal.  
RM383PA  
Weight  
Power  
MANUEL DE L’UTILISATEUR  
Clock signal reception indicator:  
FIG. 1  
STRONG SIGNAL  
WEAK SIGNAL  
NO SIGNAL  
FR  
ABOUT OREGON SCIENTIFIC  
VUE D’ENSEMBLE  
1
about Oregon Scientific products. If you’re in the US and  
would like to contact our Customer Care department directly,  
please visit: www2.oregonscientific.com/service/support  
FACE AVANT (FIG 1)  
4
1. LED de projection / Mise au point: permet d’ajuster  
MANUALLY SET CLOCK  
l’image projetée  
1. Press and hold MODE to enter.  
2. Press MODE to toggle between displays.  
OR  
2. Horloge avec affichage des secondes / jours de la  
semaine  
Call 1-800-853-8883.  
2
3
5
6
3. Press  
or  
to increase / decrease values of the  
3. Calendrier  
For international inquiries, please visit:  
www2.oregonscientific.com/about/international  
selected setting.  
4. SNOOZE (Rappel d’alarme) : appuyez pour activer la  
4. Press MODE to confirm.  
fonction snooze / active le rétro-éclairage*  
7
8
The settings order is: time zone offset, 12/24 hr format,  
hour, minute, year, month-day / day-month, month, day and  
language.  
5. Indicateur de réception du signal  
6. Fuseau horaire  
FCC STATEMENT  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1) This  
device may not cause harmful interference, and (2) This  
device must accept any interference received, including  
interference that may cause undesired operation.  
7. Mode d’affichage de l’alarme  
8. Alarme 1/2 activée  
RM383PA: Select the time zone: (P) Pacific, (E) Eastern, (C)  
Central or (M) Mountain.  
*une fois l’adaptateur connecté, le rétro-éclairage est  
continuellement activé.  
FIG. 2  
NOTE The language options are English (E), German (D),  
French (F), Italian (I), and Spanish (S).  
WARNING  
Changes or modifications not expressly  
approved by the party responsible for compliance could void  
the user’s authority to operate the equipment.  
VUE DU BAS (FIG 2)  
1. Compartiment des piles  
To select display mode:  
7
8
NOTE This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide  
2. PROJECTION ON / OFF :Active / désactive la projection  
Press MODE to choose between clock with seconds and  
clock with weekday.  
continue  
3.  
/
: Augmente / diminue les valeurs du réglage  
reasonable protection against harmful interference in  
residential installation.  
a
1
2
sélectionné ; active / désactive le signal de réception de  
l’horloge.  
ALARM  
To set the alarm:  
1. Press ((.)) to toggle between Alarm 1 / 2.  
2. Press and hold ((.)) to enter alarm setting.  
 
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
4. ((.)) ALARM  
réglage de l’alarme.  
ALARM ON / OFF: permet d’activer / désactiver  
l’alarme  
:
Visualisation du statut de l’alarme  
;
� �  
 
5.  
3. Press  
/
to set hour / minute.  
4. Press ((.)) to confirm or MODE to confirm and exit.  
6. MODE : modifie les réglages / l’affichage  
7. Prise adaptateur CA / CC  
indicates alarm is ON.  
8. RESET (REINITIALISER) : Réinitialise l’appareil aux  
réglages par défaut  
To activate / deactivate alarm 1 and / or 2:  
3
4
5
6
Reorient or relocate the receiving antenna.  
Press  
.
Increase the separation between the equipment and  
receiver.  
POUR COMMENCER  
To silence the alarm:  
INSTALLATION DE PILES  
Atomic Projection Clock with  
Ambient Lighting  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Press SNOOZE to silence it for 8 minutes  
1. Retirer le compartiment à piles.  
OR  
2. Installer les piles, en faisant correspondre les polarités  
(+ / -).  
Consult the dealer or an experienced radio  
technician for help.  
/
TV  
Press any other button to turn the alarm off and activate  
it again after 24 hours.  
Model: RM383PA  
3. Appuyer sur RESET après chaque changement de  
USER MANUAL  
piles.  
DECLARATION OF CONFORMITY  
PROJECTION  
To activate / deactivate continuous projection:  
The following information is not to be used as contact for  
support or sales. Please call our customer service number  
the warranty card for this product) for all inquiries instead.  
We  
HORLOGE  
EN  
Slide PROJECTION switch when adaptor is connected.  
RÉCEPTION DE L’HORLOGE  
OVERVIEW  
To flip image by 180°:  
Cet appareil est conçu pour synchroniser son horloge  
automatiquement avec un signal horaire.  
FRONT VIEW (FIG. 1)  
While image is projected, press SNOOZE.  
Name:  
Address:  
Oregon Scientific, Inc.  
19861 SW 95th Ave.,Tualatin,  
Oregon 97062 USA  
1. LED Projection / FOCUS: adjust projected image  
2. Clock with Seconds / Weekday  
3. Calendar  
To focus image:  
Turn FOCUS wheel.  
RM383PA:  
SignalWWVB-60:dansunrayonde3200km(2000miles)  
de Fort Collins Colorado. Régler l’heure manuallement  
pour choisir la zone horaire (Pacific, Mountain, Central  
ou Eastern).  
Telephone No.: 1-800-853-8883  
declare that the product  
4. SNOOZE: Press to activate snooze function / activate  
NOTE If projection is illuminated, do not look directly into  
the projector.  
backlight*  
5. Signal reception indicator  
6. Time zone offset  
Product No.:  
RM383PA  
Product Name:  
Atomic Projection Clock with Ambient  
Lighting  
Activer / désactiver la réception du signal :  
Maintenez le bouton pour activer, ou le bouton  
désactiver la réception du signal.  
RESET  
7. Alarm display mode  
Manufacturer:  
Address:  
IDT Technology Limited  
Block C, 9/F, Kaiser Estate,  
pour  
Press RESET to return to the default settings.  
8. Alarm 1 / 2 is ON  
*when adapter is connected, backlight is continuously on.  
Phase 1, 41 Man Yue St., Hung Hom,  
Kowloon, Hong Kong  
PRECAUTIONS  
REMARQUE La réception prend 2-10 minutes. Si le signal  
est faible, cela peut prendre jusqu’à 24 heures pour obtenir  
un signal valable.  
BOTTOM VIEW (FIG. 2)  
1. Battery compartment  
Do not subject the unit to excessive force, shock, dust,  
temperature or humidity  
Do not cover the ventilation holes with any items such as  
newspapers, curtains etc.  
Do not immerse the unit in water. If you spill liquid over  
it, dry it immediately with a soft, lint-free cloth.  
is in conformity with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: 1) This device may  
not cause harmful interference. 2) This device must accept  
any interference received, including interference that may  
cause undesired operation.  
2. PROJECTION ON / OFF: enable / disable continuous  
projection  
Indicateur de réception du signal de l’Horloge :  
3.  
/
: Increase / decrease values of the selected  
setting; activate / deactivate clock reception signal  
4. ((.)) ALARM: View alarm status; set alarm  
SIGNAL FORT  
SIGNAL FAIBLE  
AUCUN SIGNAL  
Do not clean the unit with abrasive or corrosive materials.  
Do not tamper with the unit’s internal components. This  
invalidates the warranty.  
5. ALARM ON/OFF: activate deactivate alarm  
/
function  
Only use fresh batteries. Do not mix new and old batteries.  
Images shown in this manual may differ from the actual  
display.  
6. MODE: Change settings / display  
7. AC / DC socket  
REGLER MANUELLEMENT L’HORLOGE  
1. Appuyez et maintenez la touche MODE pour entrer  
When disposing of this product, ensure it is collected  
separately for special treatment.  
Placement of this product on certain types of wood  
may result in damage to its finish for which Oregon  
Scientific will not be responsible. Consult the furniture  
manufacturer's care instructions for information.  
8. RESET: Reset unit to default settings  
dans les réglages.  
2. Appuyez sur MODE pour alterner entre :  
GETTING STARTED  
3. Appuyez sur  
ou  
pour augmenter / diminuer les  
valeurs le réglage sélectionné.  
INSERT BATTERIES  
4. Appuyez sur MODE pour confirmer.  
1. Remove the battery compartment.  
The contents of this manual may not be reproduced  
without the permission of the manufacturer.  
Do not dispose old batteries as unsorted municipal  
waste. Collection of such waste separately for special  
treatment is necessary.  
Les réglages s’effectuent dans l’ordre suivant : Fuseau  
horaire, format 12/24 heures, heure, minutes, année, format  
jour-mois/mois-jour, mois et langue.  
2. Insert the batteries, matching the polarities (+ / -).  
3. Press RESET after each battery change.  
CLOCK  
RM383PA: Sélectionne la zone horaire: (P) Pacific, (E)  
Eastern, (C) Central ou (M) Mountain.  
Please note that some units are equipped with  
a
CLOCK RECEPTION  
battery safety strip. Remove the strip from the battery  
compartment before first use.  
Thisproductisdesignedtosynchronizeitsclockautomatically  
with a clock signal.  
REMARQUE Les options de langue sont Anglais (E),  
Alemand (D), Français (F), Italien (I), et Espagnol (S).  
NOTE The technical specifications for this product and the  
contents of the user manual are subject to change without  
notice.  
RM383PA:  
WWVB-60 signal: within 3200km (2000 miles) of Fort  
Collins Colorado. Manually set clock to select time zone  
(Pacific, Mountain, Central or Eastern).  
Pour sélectionner le mode d’affichage :  
Appuyez sur MODE pour choisir entre l’horloge indiquant les  
secondes et celle indiquant les jours de la semaine.  
 
RM38PA_M_USA_R2.indd  
1
9/7/07 5:26:38 PM  

Miele Convection Oven h 399 b User Manual
Milwaukee Power Screwdriver 0501 02 User Manual
Mr Coffee Coffeemaker BVMC ECM260 User Manual
Napoleon Fireplaces Gas Heater BGD42N User Manual
Nilfisk ALTO Vacuum Cleaner 3308 User Manual
Nintendo Video Games 45496741723 User Manual
Olympus Carrying Case E03 User Manual
Omnimount TV Video Accessories Modena 47FP User Manual
Onkyo DVD Player DV CP704S User Manual
ParaBody Home Gym PBF064 User Manual