Oregon Scientific Clock RM622PA User Manual

The Snooze Function.............................................. 6  
The Projector Function........................................... 6  
Adjusting the Projector ...................................... 7  
Choosing Your Time Zone ..................................... 7  
Indoor Temperature ................................................ 7  
Resetting the Unit ................................................... 7  
Safety and Care ....................................................... 7  
Warnings.................................................................. 8  
Troubleshooting ...................................................... 8  
Specifications.......................................................... 8  
Main Unit Dimensions ....................................... 8  
Temperature ..................................................... 8  
Clock ................................................................. 9  
Power ................................................................ 9  
About Oregon Scientific ......................................... 9  
FCC Statement ...................................................... 10  
Atomic Projection Clock  
(RM622PA)  
USER MANUAL  
CONTENTS  
Introduction ............................................................. 2  
Product Overview ................................................... 2  
Front View ......................................................... 2  
Back View ......................................................... 3  
LCD Display ...................................................... 3  
Getting Started ........................................................ 4  
Batteries ............................................................ 4  
AC Adaptor ....................................................... 4  
Clock ........................................................................ 4  
Activating / Deactivating the RF Signal ............. 5  
Setting the Clock Manually .................................... 5  
The Alarm Function ................................................ 6  
Displaying the Alarm Time ................................ 6  
Setting / Activating the Alarm Time ................... 6  
 
1
BACK VIEW  
LCD DISPLAY  
1
6
7
8
2
4
3
4
1
9
5
6
5
2
3
1. Clock hour and minute  
7
2. Radio frequency (RF) signal reception  
3.  
Alarm on icon  
4. ((.)) Alarm time indicator  
1. FOCUS knob  
5. Alarm time (month / day) or calendar  
6. U.S. map for time-zone selection  
7. Clock seconds / language  
2. IMAGE ROTATION knob  
3. Power adaptor socket  
4. Battery compartment  
5. PROJECTION ON switch  
6. Table stand  
8.  
Low battery indicator  
9. Indoor temperature  
7. RESET hole  
 
3
AC ADAPTOR  
GETTING STARTED  
BATTERIES  
The main unit has a 3.0V AC/DC adaptor with jack, which  
provides continuous clock projection.  
Insert batteries before first use, matching the polarity  
(+ and -) as shown in the battery compartment. Press  
RESET after each battery change.  
CLOCK  
The clock automatically synchronizes the current time  
and date when it is brought within range of the WWVB-  
60 radio signal (60 kHz) generated from Fort Collins,  
boulder.nist.gov/timefreq/stations/radioclocks.htm.  
shows on the LCD when battery power is low.  
Replace batteries as soon as possible to maintain optimal  
performance.  
NOTE For optimal performance, use alkaline batteries  
with this product and do not use rechargeable batteries.  
NOTE Initial reception takes 2-10 minutes and begins  
when you first set up the unit, and also whenever you  
press RESET. Once complete, the reception icon will  
stop blinking.  
 
4
ACTIVATING / DEACTIVATING THE RF SIGNAL  
1. Press and hold MODE for 2 seconds. The first  
clock setting, the hour setting, begins flashing.  
2. Press or to adjust the hour values. To choose  
the values more quickly, press and hold or  
continuously.  
3. To confirm and save the desired hour value, press  
MODE. The next clock setting, the minute setting,  
automatically begins flashing.  
1. To activate the RF signal, press and hold for 2  
seconds.  
2. To deactivate the RF clock reception, press and hold  
ZONE for 2 seconds.  
NOTE The RF signal icon  
appears on the LCD when  
4. Repeat steps 2 and 3 to adjust the clock minute  
values and the other clock settings accordingly.  
5. After adjusting the hour and minute, you may decide  
to skip adjusting the minute, year and month, and go  
directly to adjust the date settings. To skip any  
setting, press MODE to navigate through the items  
until you reach the desired setting.  
it is activated and disappears when it is deactivated. If  
the clock cannot recive any signal reception, appears  
instead of . See section on "Troubleshooting" for more  
information.  
SETTING THE CLOCK MANUALLY  
NOTE When adjusting the date on the second line of the  
LCD, the corresponding day-of-the-week shown on the  
LCD’s top line will change automatically.  
The 12-hour clock automatically sets itself to the U.S.  
Atomic Clock - it never needs adjusting for Daylight  
Saving Time. The top line of the clock display shows  
hours, minutes and seconds / day-of-the-week. To toggle  
between seconds and day-of-the-week display, press  
MODE. The second line shows calendar (month and  
date) / alarm time and indoor temperature.  
NOTE The time is shown only in 12 hr AM/PM format. 24  
hr format is not available in this unit.  
NOTE During anytime you are in the middle of adjusting  
a clock setting manually and is left idle for 1 minute, the  
clock automatically saves the current setting chosen.  
To adjust the clock settings manually without automatic  
RF synchronization, remember to deactivate the radio  
reception first.  
Each of clock settings can be adjusted in the following  
order: hour, minute, year, month, date, and language (E,  
S, F).  
 
5
When the Snooze function is enabled, the Snooze  
period will last 8 minutes before the alarm sounds again.  
will flash coninuously on the LCD.  
THE ALARM FUNCTION  
DISPLAYING THE ALARM TIME  
By default, the second line of the unit's LCD screen  
displays current month and date. To display the alarm  
time instead, press once. To show the month and date  
again, press MODE.  
NOTE Pressing SNOOZE / LIGHT turns on the green  
LED backlight that lasts for 5 seconds before automatically  
turning off. The backlight does not turn on when any of  
the other buttons are pressed.  
SETTING / ACTIVATING THE ALARM TIME  
NOTE The Snooze function will disable if the button is  
pressed. The alarm time will remain activated and will  
ring the following day at the same time unless you press  
again to turn off the alarm.  
1. Press and hold for 2 seconds. The alarm hour will  
flash.  
2. Use or to set the hour. To choose the setting  
more quickly, press and hold or continuously.  
3. Press to confirm and save the desired hour setting.  
The minutes will automatically flash.  
THE PROJECTOR FUNCTION  
4. Repeat steps 2 and 3 to set the minutes setting. The  
alarm time has now been set and is automatically  
activated. The alarm bell icon appears to the left of  
the alarm time.  
The projector displays the time via a bright red projection  
light onto a wall, ceiling, or just about any surface for  
easy and convenient viewing in a darkened room. The  
time projected is shown as a single line (HH:MM) in  
12-hour AM/PM format.  
5. To deactivate the alarm, press the . The LCD no  
longer displays  
.
1. To activate the projection light, press SNOOZE /  
LIGHT. The projector will project the time for 5  
seconds before automatically turning off.  
2. To activate continuous projection, slide the  
PROJECTION ON / OFF switch to ON. Note that  
this function will not work unless the AC/DC adaptor  
is used.  
NOTE The alarm will automatically stop ringing after 2  
minute. But after 8 minutes, the alarm will sound once  
more unless is pressed.  
THE SNOOZE FUNCTION  
3. To deactivate continuous projection, slide the  
PROJECTION ON switch to OFF.  
While the alarm is ringing, press the SNOOZE / LIGHT  
to stop the alarm sound and activate the Snooze function.  
 
6
NOTE If the unit is being run on batteries, the  
PROJECTION ON / OFF switch does not need to be on.  
If you press SNOOZE / LIGHT, the projection light will  
turn on anyway.  
setting. The time will automatically adjust accordingly.  
INDOOR TEMPERATURE  
The Atomic Projection Clock monitors and displays  
indoor temperature. The indoor temperature is shown in  
Fahrenheit (°F) only. The unit is capable of measuring  
temperatures within the +23°F to +122°F (-5°C to  
+50°C) range.  
ADJUSTING THE PROJECTOR  
The RM622PA allows you to adjust the projector so that  
you are able to view the projection image with more  
clarity and convenience.  
The projector head can vertically swivel 180º so that  
you may view the time from different positions.  
The IMAGE ROTATION knob allows you to orient  
the projected image (continuously from 0º to 330º  
clockwise / counterclockwise) so that you can read  
the time more conveniently.  
If the projected image is out of focus, use the image-  
focusing knob to adjust accordingly until the  
projection is in focus.  
RESETTING THE UNIT  
The RESET hole is located in the main unit battery  
compartment. Press RESET when you change the  
batteries and whenever performance is not behaving as  
expected (for example, unable to establish radio  
frequency link). The clock will reset to its original default  
values.  
SAFETY AND CARE  
CHOOSING YOUR TIME ZONE  
Clean the product with a slightly damp cloth and alcohol-  
free, mild detergent. Avoid dropping the product or  
placing it in a high-traffic location.  
The top right of the RM622PA’s LCD screen shows a  
U.S. map with 4 time zones: P (Pacific), M (Mountain), C  
(Central) or E (Eastern). Choosing your specific time  
zone makes it convenient to take the projection clock  
with you and use anywhere during your travels in the  
country.  
To choose your time zone, simply press ZONE repeatedly  
to toggle between the 4 zones and stop at the desired  
 
7
TROUBLESHOOTING  
PROBLEM SYMPTOM  
WARNINGS  
This product is designed to give you years of service if  
handled properly. Oregon Scientific will not be responsible  
for any deviations in the usage of the device from those  
specified in the user instructions or any unapproved  
alterations or repairs of the product. Observe the following  
guidelines:  
REMEDY  
Calendar  
Illegible month / Change language  
date  
Clock  
Cannot adjust  
clock  
Disable atomic clock  
Never immerse the product in water. This can cause  
electrical shock and damage the product.  
Do not subject the main unit to extreme force, shock,  
or fluctuations in temperature or humidity.  
Do not tamper with the internal components.  
Do not mix new and old batteries or batteries of  
different types.  
Cannot auto-  
synchronize  
date and time  
1. Adjust batteries  
2. Press RESET  
3. Manually activate  
clock feature  
Temp  
Shows "LLL" or Temperature is out-of-  
"HHH"  
range  
Do not use rechargeable batteries with this product.  
Remove the batteries if storing this product for a long  
period of time.  
SPECIFICATIONS  
Do not scratch the LCD display.  
MAIN UNIT DIMENSIONS  
NOTE The technical specifications of this product and  
contents of this user manual are subject to change  
without notice. Images not drawn to scale.  
Length x Width x Height:  
5.27 x 2.04 x 3.23 in  
(134 x 52 x 82 mm)  
Weight:  
5.71 oz (162 g)  
without battery  
TEMPERATURE  
Unit:  
°F  
Indoor Range:  
+23°F to +122°F  
(-5°C to +50°C)  
 
8
Resolution:  
0.2°F (0.1°C)  
ABOUT OREGON SCIENTIFIC  
more about Oregon Scientific products such as digital  
cameras; MP3 players; children's electronic learning  
products and games; projection clocks; health and fitness  
gear; weather stations; and digital and conference  
phones. The website also includes contact information  
for our customer care department in case you need to  
reach us, as well as frequently asked questions and  
customer downloads.  
CLOCK  
RF Clock:  
Auto or manual (disabled)  
HH:MM:SS  
Clock display:  
Hour format:  
Calendar:  
12hr AM/PM  
MM/DD; weekday in  
3 languages  
(English, Spanish, French)  
We hope you will find all the information you need on our  
website, however if you'd like to contact the Oregon  
Scientific Customer Care department directly, please  
visit www2.oregonscientific.com/service/support OR call  
949-608-2848 in the US. For international enquiries,  
please visit www2.oregonscientific.com/about/  
international/default.asp.  
Alarm:  
Single alarm with  
2-minute crescendo  
POWER  
Main unit batteries:  
2 x AA (UM-3) 1.5V  
 
9
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment  
and receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio / TV  
technician for help.  
FCC STATEMENT  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and (2)  
This device must accept any interference received,  
including interference that may cause undesired  
operation.  
WARNING Changes or modifications to this unit not  
expressly approved by the party responsible for  
compliance could void the user's authority to operate the  
equipment.  
NOTE This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
 
10  
© 2004 Oregon Scientific. All rights reserved.  
P/N: 086-003592-018  
 
Atomic Projection Clock  
Model: RM622PA  
User Manual  
 

Miele Cooktop KM 342 User Manual
Miele Ventilation Hood DA5321W User Manual
Miele Washer Dryer T7644C User Manual
Miller Electric Welding System Shopmate Series User Manual
Multi Tech Systems Server MVP210 410 810 FX User Manual
NEC Marine Radio NEAX2400IMX User Manual
Nesco Oven 6 Qt Roaster Oven User Manual
NewAir Thermostat 9700i User Manual
Nortel Networks Power Supply Passport 8002PS User Manual
Panasonic Vacuum Cleaner MC CL935 User Manual