Oregon Scientific Clock Radio EW96 User Manual

C8314A Size: A4  
11.BATTERY COMPARTMENT:  
Accommodates 2 AA size batteries.  
Note  
1.  
2.  
·
During the setting period, press and hold “+” or “-”  
key to speed up the change of settings.  
The time zone indicators are abbreviated as  
below: P=Pacific, M=Mountain, C=Central,  
E=Eastern.  
12.RESET key:  
·
·
Press it to return all values to default values.  
In case of malfunction, the unit may be required  
to reset.  
Projection Alarm Clock  
with Indoor Thermometer  
Model: EW96  
13.°C/°F slide switch:  
USER MANUAL  
ALARM TIME SETTING  
·
Slide it to switch between Celsius and Fahrenheit.  
Thank you for your purchase of this Projection Alarm  
Clock. Please read these instructions carefully and  
keep the manual well for future reference.  
1.  
In normal time mode, press “SET ALARM” key  
once to enter the alarm time setting mode.  
Press “+” or “-” key to set hour/minute.  
Press “SET ALARM” key to save and exit the  
setting mode. “ ” indicates alarm is ON.  
14.PROJECTION ON/OFF slide switch:  
·
Slide it to turn on/off the projector.  
2.  
3.  
15.180° FLIP key:  
The unit has a clear and easy-to-read display that  
shows the indoor temperature, time and date.  
·
Press it to rotate the projected image by 180°.  
16.RCC key:  
This product is designed to synchronize its date and  
time automatically once it is within range of the WWVB-  
60 signal from the atomic clock inFort Collins, Colorado.  
·
In normal time mode, press it once to receive  
the RC signal for reception testing.  
Normal time mode  
Note  
Alarm time setting  
17.BATTERY DOOR  
OVERVIEW  
RECEIVER  
LCD DISPLAY  
1. Time zone  
1.  
2.  
The alarm will be automatically turned on when  
you set the alarm time.  
During the alarm time setting period, press and  
hold “+” or “-” key to speed up the change of  
settings.  
1
2. Low battery indicator  
3. Signal reception indicator  
4. Indoor temperature  
5. Time  
2
6. Alarm time & Date  
3
1
2
3
USING ALARM FUNCTION  
5
6
ALARM  
1.  
Follow the directions above to set the alarm  
time.  
4
2.  
3.  
In normal time mode, press “ALARM ON/OFF”  
key once to display the current alarm time.  
Press it again to turn alarm ON/OFF.  
OPERATING THE MAIN UNIT  
1.  
Remove the battery door and insert 2 new AA  
4
size batteries as per the polarity information  
marked on the battery compartment.  
Press “RESET” key to restart the clock.  
Slide “°C/°F” switch to select between Celsius  
and Fahrenheit.  
8
TO SILENCE THE ALARM  
5
9
6
2.  
3.  
1.  
Press “SNOOZE/LIGHT” to silence the alarm  
for 8 minutes. The “ ” will be flashing.  
Press any other key to turn the alarm off and  
activate it again after 24 hours.  
If no key is pressed within 120 seconds, the  
alarm will be turned off and be activated again  
after 24 hours.  
7
2.  
3.  
10  
4.  
Replace the battery door.  
RECEPTION OF RADIO CONTROLLED TIME SIGNAL  
14  
1213  
The time and calendar are radio-controlled. The current  
time and calendar are automatically synchronized with  
the atomic clock signal from Fort Collins, Colorado.  
When used for the first time (after inserting batteries  
or pressing “RESET” key), the clock will start to search  
for the atomic clock signal and the signal reception  
icon will flash for 5 minutes.  
USING THE PROJECTOR  
Slide the “PROJECTION ON/OFF” switch to turn on/  
off the projection light. The projection light must be on  
a dark background and within 1-4 meters (3 to 12 feet)  
from the clock, see example below:  
15  
16  
11  
17  
SIGNAL RECEPTION INDICATOR  
The wave segment flashing means time signals are  
being received. The signal quality could be classified  
into 3 types:  
1.Projector:  
·
Use it to project the time.  
2.SNOOZE/LIGHT key:  
No signal  
Note  
Weak signal  
Excellent signal  
·
·
In normal time mode, press it once to turn on  
the backlight for 5 seconds.  
Press it to silence the current alarm when it is  
going and enter the snooze mode for 8 minutes.  
1.  
The unit will automatically search for the time  
signal at 2:00am (3:00am or 4:00am is also  
available if the signal is not received at 2:00am),  
8:00am, 2:00pm, and 20:00 each day.  
Note  
3.LCD display:  
1.  
2.  
3.  
4.  
5.  
6.  
Slide “PROJECTION ON/OFF” to turn on the  
projection function.  
Press “SNOOZE/LIGHT” to turn on the projector  
for 5 seconds.  
When using DC power adapter, the projector will  
be turned on all the time.  
·
Displays time, indoor temperature and date.  
2.  
Always place the unit away from electrical  
devices such as televisions, computers,  
telephones, etc.  
4.+ key:  
·
In time setting mode, press it to increase the  
setting values.  
3.  
4.  
Avoid placing the unit on or next to metal plates.  
If possible, place the unit next to a window.  
Signal reception is greatly decreased when located  
in closed areas like basements or metal buildings.  
Do not start reception in moving vehicles or trains.  
If the alarm is set to go off, the alarm icon “  
will be projected.  
5.SET CLOCK key:  
·
In normal time mode, press it once to enter the  
normal time setting mode.  
Press “180 FLIP” to rotate the projected image  
by 180°.  
Turn “FOCUS” knob to focus the projected image.  
5.  
·
In normal time setting mode, press it to step  
the setting items. Press and hold it to exit the  
setting mode in any step.  
TIME AND CALENDAR MANUAL SETTING  
If you are out of reach of the Radio Controlled sensor  
or if the reception is not reachable, the time and calendar  
can be set manually. As soon as the signal of sensor  
is received again, the clock will automatically  
synchronize with the exact time and calendar.  
BATTERY REPLACEMENT  
6.- key:  
In time setting mode, press it to decrease the  
setting values.  
·
If the low battery icon turns on next to time, replace  
the main unit’s battery with 2 new AA batteries.  
7.DC jack:  
1.  
In normal time mode, press “SET CLOCK” key  
once to enter the time setting mode.  
Press “+” or “-” key to change the settings.  
Press “SET CLOCK” to confirm. The setting order  
is: 12/24-hr format, time, time zone offset, year,  
day/month format, date.  
Low battery indicator  
·
Plug DC adaptor to power the clock.  
2.  
3.  
8.ALARM ON/OFF key:  
·
Press it once to turn on the backlight and display  
the alarm time for 5 seconds.  
·
Press it again to turn on/off the alarm.  
4.  
Press “SET CLOCK” key to save and exit the  
setting mode.  
9.SET ALARM key:  
Note  
·
Press it once to turn on the backlight for 5  
seconds, and press it again to enter the alarm  
time setting mode.  
Attention! Please dispose of the used unit or batteries  
in an ecologically safe manner.  
12/24 Hr setting  
Time setting  
Time zone setting  
·
In alarm time setting mode, press it to step the  
setting items.  
10.FOCUS turning knob:  
Focus the projected image.  
Month-Date setting  
MD/DM setting  
Year setting  
·
 

Murphy Remote Starter AS730 User Manual
Murray Lawn Mower 7800864 User Manual
Nilfisk ALTO Pressure Washer 107140469 D User Manual
Nokia Satellite TV System 9828 User Manual
Nortel Networks Server NN43001 106 User Manual
NorthStar Navigation SONAR Explorer D310 User Manual
Omnimount Indoor Furnishings AB2 User Manual
Omron Video Game Controller master control units User Manual
Optima Company Indoor Fireplace Optima 3600O User Manual
Patton electronic Network Router 4110 Series User Manual