Oregon Scientific Marine Radio BAR628HG BAR628HGU User Manual

INTRODUCTION  
ThankyouforselectingtheOregonScientificTM Weather  
Station Advanced (BAR628HG / BAR628HGU). This  
device bundles precise time keeping, weather forecast,  
and indoor and outdoor temperature and humidity  
monitoring features into a single tool you can use from  
the convenience of your home.  
Weather Station Advanced  
Model: BAR628HG /  
BAR628HGU  
In this box, you will find:  
Main unit  
User Manual  
Remote sensor (THGR122NX)  
Main unit batteries, 3 x UM-3 (AA) 1.5V  
Remote sensor batteries, 2 x UM-4 (AAA) 1.5V  
CONTENTS  
Keep this manual handy as you use your new product.  
It contains practical step-by-step instructions, as well as  
technical specifications and warnings you should know.  
Contents .................................................................. 1  
Introduction ............................................................. 1  
Product Overview ................................................... 2  
Front View ........................................................... 2  
Back View ........................................................... 2  
LCD Display ........................................................ 3  
Remote Sensor (THGR122NX)........................... 3  
Getting Started ........................................................ 4  
Batteries .............................................................. 4  
Change Settings.................................................. 4  
Table Stand or Wall Mount.................................. 4  
Remote Sensor (THGR122NX) ............................... 4  
Setup Sensor ...................................................... 4  
Data Transmission .............................................. 5  
Search for Sensor ............................................... 5  
Clock ........................................................................ 5  
Turn Clock ON / OFF .......................................... 5  
Set Clock / Calendar ........................................... 5  
Switch Clock Display ........................................... 6  
Alarm ........................................................................ 6  
View Alarm Settings ............................................ 6  
Set Alarm ............................................................ 6  
Activate Alarm ..................................................... 6  
Silence Alarm ...................................................... 6  
Weather Forecast .................................................... 6  
Temperature and Humidity .................................... 6  
Select Temperature Unit ..................................... 6  
Select Channel Number ...................................... 6  
Minimum / Maximum Records............................. 6  
Moon Phase ............................................................. 6  
Reset System .......................................................... 7  
Safety and Care ....................................................... 7  
Warnings .................................................................. 7  
Troubleshooting ...................................................... 7  
Specifications.......................................................... 7  
Main Unit Dimensions ......................................... 7  
Remote Sensor Dimensions ............................... 7  
Temperature........................................................ 7  
Relative Humidity ................................................ 7  
Weather Forecast................................................ 7  
Remote Sensor (THGR122NX)........................... 7  
Clock ................................................................... 7  
Power .................................................................. 8  
About Oregon Scientific ......................................... 8  
Declaration of Conformity ...................................... 8  
 
1
LCD DISPLAY  
REMOTE SENSOR (THGR122NX)  
1
A
2
1
2
3
4
B
5
6
7
8
C
9
10  
11  
12  
13  
D
14  
15  
1. LCD display  
2. LED status indicator  
A. Weather Forecast Area  
B. Outdoor Temperature & Humidity Area  
C. Indoor Temperature & Humidity Area  
D. Clock / Alarm / Calendar Area  
1. Weather display  
2. Outdoor humidity  
3. Sensor signal  
1
4. Low battery icon for sensor  
5. Outdoor temperature  
6. Indoor humidity  
7. Indoor icon  
8. Low battery icon for main unit  
9. Indoor temperature  
10. Time  
2
3
11. Radio Frequency (RF) reception icon  
12. Alarm activated  
13. Alarm setting  
4
14. Calendar  
15. Moon phase  
1. Wall mount hole  
2. RESET hole  
3. CHANNEL number (1-3)  
4. Battery compartment  
(Battery compartment cover not shown)  
 
3
TABLE STAND OR WALL MOUNT  
GETTING STARTED  
BATTERIES  
Use the stand on the back of the main unit / remote  
sensor, or mount it on a wall with a nail.  
Batteries are supplied with this product:  
To attach the main unit stand:  
Main unit 3 x UM-3 (AA) 1.5V batteries  
Remote unit  
2 x UM-4 (AAA) 1.5V batteries  
Insert batteries before first use, matching the polarity  
(+ and -) as shown in the battery compartment. For best  
results, install batteries in the remote sensor before the  
main unit. Press RESET after each battery change.  
NOTE Do not use rechargeable batteries.  
shows when batteries are low.  
To use the main unit wall mount:  
NOTE It is recommended that you use alkaline batteries  
with this product for longer performance.  
UNIT  
LOCATION  
Main  
Indoor Temperature /  
Humidity Area  
Remote  
Outdoor Temperature /  
Humidity Area  
Installing the batteries:  
To use the remote sensor stand or wall mount:  
CHANGE SETTINGS  
To change, time, calendar and language settings:  
REMOTE SENSOR (THGR122NX)  
This product is shipped with a THGR122NX Thermo /  
Hygro Sensor that collects Temperature and Humidity  
data. Data can be collected from up to 3 sensors.  
Additional sensors sold separately.  
1. Press and hold MODE for 2 seconds to enter setting  
mode.  
2. Press  
or  
to change settings. (To reach the  
setting you want quickly, press and hold or .)  
3. Press MODE to confirm.  
SETUP SENSOR  
1. Open the remote sensor battery compartment with a  
small Phillips screwdriver.  
2. Insertthebatteries, matchingthepolarity(+and-)as  
shown in the battery compartment.  
SWITCH OPTION  
Channel Channel 1-3. If you are using more than  
one sensor, select a different channel for  
each sensor.  
 
4
3. Set the channel. The switch is located in the battery  
compartment.  
SEARCH FOR SENSOR  
To search for a sensor, press and hold MEM and  
CHANNEL (on the main unit) for 2 seconds.  
4. Place the sensor near the main unit. Press RESET  
on the sensor. Then, press and hold MEM and  
CHANNEL on the main unit to initiate signal sending  
between the sensor and the main unit. The reception  
icon on the main unit will blink for approximately 3  
minutes while it is searching for the sensor. (Refer to  
the"DataTransmission"sectionformoreinformation.)  
5. Close the remote sensor battery compartment.  
6. Secure the sensor in the desired location using the  
wall mount or table stand.  
NOTE If the sensor is still not found, check the batteries,  
obstructions, and remote unit location.  
NOTESignalsfromhouseholddevicessuchasdoorbells,  
electronic garage doors, and home security systems  
may cause temporary reception failure. This is normal  
and does not affect general product performance. The  
reception will resume once the interference ends.  
CLOCK  
The clock automatically synchronizes the current time  
and date when it is brought within range of the radio  
signal DCF77 generated from Frankfurt, Germany for  
CentralEurope(modelBAR628HG)orMSF60generated  
from Anthorn, England (model BAR628HGU).  
NOTE The signals are collected by the main unit when  
it is within 1500 km (932 miles) of a signal.  
For best results:  
Initialreceptiontakes2-10minutes, andisinitiatedwhen  
youfirstsetuptheunit, andwheneveryoupressRESET.  
Once complete, the reception icon will stop blinking. The  
icon is shown in the Clock Area.  
Insert the batteries and select the channel before  
you mount the sensor.  
Placethesensoroutofdirectsunlightandmoisture.  
Do not place the sensor more than 30 metres (98  
feet) from the main (indoor) unit.  
Position the sensor so that it faces the main  
(indoor) unit, minimizing obstructions such as  
doors, walls, and furniture.  
STRONG SIGNAL WEAK SIGNAL  
NO SIGNAL  
Place the sensor in a location with a clear view to  
the sky, away from metallic or electronic objects.  
Position the sensor close to the main unit during  
coldwintermonthsasbelow-freezingtemperatures  
may affect battery performance and signal  
transmission.  
To force a manual search for clock signals, press and  
hold for 2 seconds. If no signal is found, check the  
batteries.  
TURN CLOCK ON / OFF  
You may need to experiment with various locations to  
get the best results.  
Perform this step if you cannot receive clock signals.  
Press and hold for 2 seconds. Then, manually set the  
clock following the “Set Clock” instructions (below).  
DATA TRANSMISSION  
The signal icon indicates that the clock feature is ON.  
No icon means that it is OFF.  
Data is sent from the sensor(s) every 40 seconds. The  
reception icon shown in the Temperature and Humidity  
Areas show the status.  
SET CLOCK / CALENDAR  
ICON  
DESCRIPTION  
You only need to do this if you have disabled the clock  
feature (for example, if you are too far from or cannot  
receive a signal).  
Main unit is searching for  
sensors.  
At least 1 channel has been  
found.  
1. PressandholdMODEfor2seconds.TheClockArea  
will blink.  
Channel 1 is selected (number  
will change depending on the  
sensor you select).  
2. Selectthehour, minute, year, month, day, anddayof  
the week language. Press  
setting.  
or  
to change the  
3. Press MODE to confirm.  
shows in Outdoor The selected sensor cannot  
---  
Temp / Humidity Area be found. Search for the  
sensor or check batteries.  
The language options are (E) English, (F) French, (D)  
German, (I) Italian, and (S) Spanish.  
 
5
SWITCH CLOCK DISPLAY  
SELECT TEMPERATURE UNIT  
Press MODE to toggle between Clock with Seconds and  
Clock with Weekday display.  
Slide the °C / °F switch into the desired location. The  
switch is located in the main unit battery compartment.  
Thesettingforthemainunitoverridestheremotesensor  
setting.  
ALARM  
This product is equipped with a 2-minute crescendo  
alarm.  
SELECT CHANNEL NUMBER  
Press CHANNEL to switch between sensors 1-3.  
The icon shows the selected sensor.  
VIEW ALARM SETTINGS  
Press  
. The alarm time and alarm status will show in  
KINETIC-  
WAVE  
ICON  
the Clock Area.  
DESIG-  
NATED Display Display  
DISPLAY  
Indoor Remote  
Remote  
Display  
Remote  
Display  
SET ALARM  
1. Press  
2. Press and hold  
settings will blink.  
to switch to alarm display.  
Channel 1 Channel 2 Channel 3  
again for 2 seconds. The alarm  
To auto-scan between sensors, press and hold  
CHANNEL for 2 seconds. Each sensor’s data will be  
displayed for 3 seconds. To end auto-scan, press  
CHANNEL or MEM.  
3. Select the hour and minute. Press or to change  
settings. Press  
to confirm.  
ACTIVATE ALARM  
NOTE If you use a sensor that collects only temperature  
data, humidity will not be shown.  
Press to activate or deactivate the alarm. shows in  
the Clock / Alarm Area when the alarm is activated.  
NOTE For more information on the sensor see “Remote  
Sensor THGR122NX” Section.  
SILENCE ALARM  
When the alarm time is reached, the crescendo alarm  
will sound for 2 minutes. To silence the alarm:  
MINIMUM / MAXIMUM RECORDS  
The MEM button is located in the main unit battery  
compartment. Press MEM to toggle between current,  
maximum (MAX) and minimum (MIN) records. To clear  
the records, press and hold MEM for 2 seconds. A beep  
will sound to confirm that the memory has been cleared.  
Press SNOOZE to silence it for 8 minutes.  
OR  
Press any key except SNOOZE to mute the alarm  
and activate it again after 24 hours.  
MOON PHASE  
The Calendar must be set for this feature to work, see  
“Set Clock” section.  
If no button is pressed, the alarm will automatically  
silence after 2 minutes. It will then sound again after 8  
minutes.  
Press or to view the moon phase for the next  
or previous day.  
Press and hold or to scan quickly through the  
years (2001 to 2099).  
WEATHER FORECAST  
Thisproductforecaststhenext12to24hoursofweather  
within a 30-50 km (19-31 mile) radius with 70 to 75  
percent accuracy. The weather forecast is always  
displayed.  
New Moon  
Waxing Crescent  
First Quarter  
SUNNY  
PARTLY  
CLOUDY  
CLOUDY  
RAINY  
Waxing Gibbous  
Full Moon  
Waning Gibbous  
Last Quarter  
TEMPERATURE AND HUMIDITY  
Waning Crescent  
Thisproductcandisplaycurrent,minimum,andmaximum  
temperatures and humidity percentage information  
collected by the remote sensors and main (indoor) unit.  
Outdoordataiscollectedanddisplayedevery40seconds.  
Indoordataiscollectedanddisplayedevery10seconds.  
 
6
RESET SYSTEM  
SPECIFICATIONS  
MAIN UNIT DIMENSIONS  
L x W x H  
The RESET button is located in the main unit battery  
compartment. Press RESET when you change the  
batteries and whenever performance is not behaving as  
expected (for example, unable to establish radio  
frequency link with remote sensor or clock).  
116 x 55 x 127 mm  
(4.6 x 2.2 x 5 inches)  
Weight  
186g(6.6ounces)without  
battery  
SAFETY AND CARE  
Clean the product with a slightly damp cloth and alcohol-  
free, mild detergent. Avoid dropping the product or  
placing it in a high-traffic location.  
REMOTE SENSOR DIMENSIONS  
L x W x H  
92 x 60 x 20 mm  
(3.6 x 2.4 x 0.79 inches)  
WARNINGS  
Weight  
63 grams (2.22 ounces)  
without battery  
This product is designed to give you years of service if  
handledproperly.OregonScientificwillnotberesponsible  
for any deviations in the usage of the device from those  
specified in the user instructions or any unapproved  
alterationsorrepairsoftheproduct.Observethefollowing  
guidelines:  
TEMPERATURE  
Unit  
°C / °F  
Indoor range  
Outdoor range  
Resolution  
-5°C to 50°C  
Never immerse the product in water. This can  
cause electrical shock and damage the product.  
Do not subject the main unit to extreme force,  
shock, or fluctuations in temperature or humidity.  
Do not tamper with the internal components.  
Do not mix new and old batteries or batteries of  
different types.  
(23°F to 122°F)  
-20°C to 60°C  
(-4°F to 140°F)  
0.1°C (0.2°F)  
Donotuserechargeablebatterieswiththisproduct.  
Remove the batteries if storing this product for a  
long period of time.  
RELATIVE HUMIDITY  
Range  
25% to 95%  
1%  
Do not scratch the LCD display.  
Resolution  
Memory  
NOTE The technical specification of this product and  
contents of this user guide are subject to change without  
notice. Images not drawn to scale.  
Minimum / maximum  
WEATHER FORECAST  
TROUBLESHOOTING  
Display  
Rainy, cloudy, partly  
cloudy, sunny  
PROBLEM SYMPTOM  
REMEDY  
Calendar  
Strange date /  
month  
Change language  
REMOTE SENSOR (THGR122NX)  
(5)  
RF frequency  
433 MHz  
Clock  
Cannot adjust clock Disable clock (5)  
Cannot auto-  
synchronize the  
1. Adjust batteries  
(4)  
Range  
30 metres (98 feet) with  
no obstructions  
date and time  
2. Press RESET  
Transmission  
Channel No.  
every 40 seconds  
1-3  
(7)  
3. Manually activate  
clock feature (5)  
Temp  
Shows “LLL” or  
“HHH”  
Temperature is  
out-of-range  
CLOCK  
Remote  
sensor  
Cannot locate  
remote sensor  
Checkbatteries(5)  
RF Clock  
Auto or manual (disabled)  
HH:MM:SS  
Check location (5)  
Clock display  
Hour format  
Cannot change  
channel  
Checksensors.Only  
one sensor is  
working (5)  
12hr AM / PM  
(Model BAR628HGU)  
24hr (Model BAR628HG)  
Data does not  
match main unit  
Initiate a manual  
sensor search (5)  
Calendar  
DD / MM; weekday in  
5 languages (E, D, F, I, S)  
 
7
Alarm  
Single alarm with  
2-minute crescendo and  
8-minute Snooze  
POWER  
Main unit batteries  
3 x UM-3 (AA) 1.5V  
2 x UM-4 (AAA) 1.5V  
Sensor batteries  
NOTE It is recommended that you use alkaline batteries  
with this product for longer performance.  
ABOUT OREGON SCIENTIFIC  
more about Oregon Scientific products. If you’re in the  
US and would like to contact our Customer Care  
department directly,  
pleasevisit:www2.oregonscientific.com/service/support  
OR  
Call 1-800-853-8883.  
For international inquiries, please visit:  
www2.oregonscientific.com/about/international  
EU-DECLARATION OF CONFORMITY  
Hereby, Oregon Scientific, declares that this Weather  
StationAdvanced(Model:BAR628HG/BAR628HGU)is  
in compliance with the essential requirements and other  
relevantprovisionsofDirective1999/5/EC. Acopyofthe  
signed and dated Declaration of Conformity is available  
on request via our Oregon Scientific Customer Service.  
COUNTRIES RTTE APPROVAL COMPLIED  
CH  
All EC countries, Switzerland  
N
and Norway  
 
8
© 2007 Oregon Scientific. All rights reserved.  
P/N: 086L003567-069  
 
Weather Station Advanced  
Model: BAR628HG / BAR628HGU  
User Manual  
 

Miele Microwave Oven M Nr 09 798 370 User Manual
Miele Oven H 5140 BP User Manual
NAD Stereo Receiver T744 User Manual
Nady Systems Stereo Amplifier Encore I User Manual
National Instruments Webcam NI 8352 User Manual
NEC Indoor Furnishings NP600CM User Manual
Nokia Satellite Radio CA 300 User Manual
Onkyo Stereo Receiver TX SR604 604E User Manual
Optimus VCR 16 549 User Manual
ParaBody Fitness Equipment 837101 User Manual