Oregon Scientific Radar Detector RM998PA User Manual

NAPOLI Voice Activated Weather Station  
Model: RM998PA  
USER MANUAL  
 
Snooze / Turning The Alarm Off ................................ 8  
Sleep Timer / Soothing Sound................................... 8  
Talking Clock ............................................................... 8  
Train The Talking Clock ............................................. 9  
Use The Talking Clock ............................................... 9  
Talking Clock Volume ............................................... 10  
NAPOLI Voice Activated Weather Station  
RM998PA  
USER MANUAL  
CONTENTS  
Erase The Talking Clock Trained Voice  
Commands ............................................................... 10  
Introduction ................................................................. 2  
Product Overview ....................................................... 3  
Front View ................................................................. 3  
Back View .................................................................. 3  
LCD Display .............................................................. 4  
Getting Started ............................................................ 4  
Batteries .................................................................... 4  
About Atomic Clock Reception ................................. 5  
Turn The Atomic Clock Reception ON / OFF ............ 5  
Clock / Calendar .......................................................... 6  
Clock / Calendar Display ........................................... 6  
Set Clock / Calendar ................................................. 6  
Backlight ...................................................................... 7  
Temperature ................................................................ 7  
Alarm ............................................................................ 7  
Alarm Display And Sound.......................................... 7  
Set The Alarm(s) ....................................................... 7  
Activate / Deactivate The Alarm(s) ............................ 7  
Projection Unit ........................................................... 10  
Wake-Up Vibrating Alarm – VR101A (Optional) ....... 10  
Reset The Clock ......................................................... 11  
Warnings ..................................................................... 11  
Troubleshooting ......................................................... 12  
Technical Specifications ........................................... 12  
Notices ........................................................................ 13  
Statement Of Responsibility ..................................... 13  
About Oregon Scientific ............................................ 13  
FCC Statement ........................................................... 14  
Declaration Of Conformity ........................................ 14  
1
RM998PAmanual-E  
1
05/1/20, 3:33 PM  
 
In this package, you will find:  
INTRODUCTION  
Clock unit  
Thank you for selecting the Oregon ScientificTM NAPOLI  
Voice Activated Weather Station. This device is designed to  
give you many years of reliable service, including the  
following conveniences:  
3 x UM-4 / AAA 1.5V batteries  
4.5V AC / DC adaptor  
Keep this manual handy as you use your new product. It  
contains practical step-by-step instructions, as well as  
technical specifications and warnings you should know.  
Atomic calendar clock  
Optional wireless vibration alarm with 8-minute snooze  
function (Wake-Up Vibrating Alarm VR101A can be  
purchased separately)  
Sleep function with 6 soothing sounds  
5 alarm melodies with 2 volume levels  
2-minute dual alarm with 8-minute snooze function  
Time / alarm status projection unit  
Talking clock – can be trained to tell you the time, alarm  
and temperature status, turn the alarm ON / OFF and  
the projector ON, when it hears your personal voice  
command  
4 talking clock languages - English, Italian, French and  
Spanish  
Indoor temperature display  
Time zone hour offset function  
Backlight for clock  
2
RM998PAmanual-E  
2
05/1/20, 3:33 PM  
 
1. Snooze / Light: Activate 8-minute snooze function, or  
backlight and projector  
PRODUCT OVERVIEW  
FRONT VIEW  
2. LCD display  
3.  
/ : Increase / decrease a setting; activate / deactivate  
Atomic clock  
4. Talk: Enter talking clock training program; activate talking  
clock after training  
1
2
5. Sound / on / off: Toggle between talk, soothing sound  
and normal modes – activate / deactivate talk function;  
set and activate sleep timer; turn soothing sounds ON /  
OFF  
7
6.  
: Microphone  
3
4
5
8
9
7. Projector: Projects time and alarm status  
8. Clock: Toggle between clock display modes; enter clock  
setting mode  
6
9. Alarm: Toggle between alarm 1 and 2 ON / OFF mode;  
enter alarm display and setting mode  
3
RM998PAmanual-E  
3
05/1/20, 3:33 PM  
 
LCD DISPLAY  
BACK VIEW  
1
2
9
10  
3
11  
4
5
4
5
12  
13  
14  
15  
16  
6
7
1
6
7
17  
18  
8
1. Time  
2. Offset time zone  
2
3. Voice activated function is ON  
4. Battery status  
8
5. AC adaptor is disconnected  
6. Calendar  
3
1. FOCUS: Twist to focus the projected image  
7. Indoor temperature – °C / °F  
8. Atomic clock reception  
9. Soothing sound function is activated  
10. Sleep function is activated  
11. Offset time zone / day of week / seconds  
12. Alarm 1  
2. IMAGE ROTATION: Twist to get the best viewing angle  
of the projected image  
3. Battery compartment (cover on): 3 x UM-4 / AAA 1.5V  
batteries  
4. °C / °F: Select °C / °F  
5. RESET: Press to return all values to the default settings  
13. Alarm 1 time  
6. 180° ROTATION: Press to flip the image if upside down  
7. PROJECTION ON: Slide to ON for continuous image  
projection when the AC power is connected  
14. Talking alarm is set  
15. Melody alarm is set  
16. Vibration alarm is set (optional item)  
17. Alarm 2 time  
8. 4.5V AC / DC adaptor socket  
18. Alarm 2  
4
RM998PAmanual-E  
4
05/1/20, 3:33 PM  
 
The batteries serve as a back-up power supply. To operate  
the voice activated function and for continuous use of the  
projector, install the AC adaptor at the base of the unit as  
shown below.  
GETTING STARTED  
BATTERIES  
The main unit uses:  
3 x UM-4 / AAA 1.5V batteries  
The optional wake-up vibration alarm VR101A (not included  
in the package) uses:  
2 x UM-3 / AA 1.5V batteries  
NOTE It is recommended that you use alkaline batteries  
with this product for longer performance.  
NOTE To help conserve energy, turn the PROJECTION  
ON switch to OFF when you do not wish to use it.  
Insert batteries before first use, matching the polarity (+ and  
-) as shown below. Press RESET after each battery change.  
ABOUT ATOMIC CLOCK RECEPTION  
The clock automatically synchronizes the current time and  
date when it is brought within range of the WWVB-60 atomic  
clock signal generated from Fort Collins, Colorado. For more  
tions/radioclocks.htm  
NOTE Do not use rechargeable batteries with this product.  
NOTE The signals are collected by the main unit when it is  
within 932 miles (1500 km) of a signal.  
BATTERY ICON  
MEANING  
TURN THE ATOMIC CLOCK RECEPTION ON / OFF  
Batteries are low, or there are no  
batteries installed and only the adaptor  
is connected  
To turn the atomic clock reception ON:  
Press and hold  
for 2 seconds.  
The LED indicator on the vibration alarm will flash red when  
the batteries are low.TOR  
The reception icon will appear and flash on the display to  
indicate it is searching for the atomic clock signal.  
5
RM998PAmanual-E  
5
05/1/20, 3:33 PM  
 
Once batteries have been installed in the clock, the reception  
icon will flash to indicate it is searching for a signal.  
SET CLOCK / CALENDAR  
Before you can manually set the clock and calendar, you  
must specify the current time zone you live in and the time  
format (12- or 24-hour) as follows:  
When the reception signal has been received the reception  
icon will show the signal strength as shown below:  
1. Press and hold CLOCK for 2 seconds. The time zone  
will flash. When an offset hour has been set (e.g. +1, the  
time displayed will be the RF clock time plus 1 hour).  
STRONG SIGNAL  
NO SIGNAL  
To turn the atomic clock reception OFF:  
Press and hold  
for 2 seconds.  
The reception icon will disappear from the display.  
2. Press  
or  
to change the setting.  
CLOCK / CALENDAR  
3. Press CLOCK to confirm the setting and move onto the  
next one.  
CLOCK / CALENDAR DISPLAY  
Press the CLOCK button to toggle between 3 types of  
display:  
4. The settings appear in the following order: Time zone  
hour offset, 12 / 24 hour format, hour, minute, year,  
MM / DD or DD / MM format, month, day and language  
for day of the week and talking clock.  
CLOCK WITH SEC CLOCK WITH DAY CLOCK WITH ZONE  
TIME OFFSET  
5. Press CLOCK or ALARM to exit the Clock Setting Mode.  
NOTE The US time zones are PA (Pacific), MO (Mountain),  
CE (Central) and EA (Eastern).  
NOTE The talking clock has 4 languages available -  
English, Italian, French and Spanish.  
6
RM998PAmanual-E  
6
05/1/20, 3:33 PM  
 
SET THE ALARM(S)  
BACKLIGHT  
1. Press and hold ALARM for 2 seconds.  
Press SNOOZE / LIGHT to activate the backlight for 8  
seconds.  
2. Alarm 1 will start flashing. Use  
between alarm 1 and 2.  
or  
to toggle  
TEMPERATURE  
The clock displays the current indoor temperature. To choose  
between °C / °F, press the °C / °F button to select the setting  
you want.  
ALARM  
ALARM DISPLAY AND SOUND  
3. Press ALARM to select alarm 1 or 2. The hour will start  
flashing.  
This product has two daily alarms that can be set to go off  
at the same time every day. You can choose to be woken  
up by a melody, beeping or talking alarm sound and / or  
vibration. See the table below for the alarm sound icon and  
its meaning:  
4. Press  
or  
to change the setting.  
5. Press ALARM to confirm the setting and move onto the  
next one.  
6. The settings appear in the following order: Hour, minute,  
alarm type, alarm sound and alarm volume (if melody  
alarm has been selected).  
ICON  
MEANING  
Talking alarm is set  
7. The daily alarm is automatically turned on after setting.  
Melody alarm is set. (There are 5 melodies  
and 1 beep alarm to choose from)  
ACTIVATE / DEACTIVATE THE ALARM(S)  
Vibration alarm is set  
Press the ALARM button to toggle between alarm 1 and  
alarm 2 ON / OFF.  
Talking and vibration alarms are set  
When the alarm sound icons appear on the display the  
alarm is activated. When the icons do not appear the  
alarm is deactivated.  
Melody and vibration alarms are set  
No alarm is set  
No icons  
7
RM998PAmanual-E  
7
05/1/20, 3:33 PM  
 
If you want to change the time, sound or volume, continue  
as follows:  
SNOOZE / TURNING THE ALARM OFF  
When activated, the alarm icon flashes, the backlight and  
projector turn on for 8 seconds and the alarm sounds for 2  
minutes if no key is pressed.  
2. Press or to change the soothing sound volume.  
3. Press Sound /  
on / off to confirm.  
To silence the alarm:  
4. Press and hold Sound /  
enter setting mode.  
on / off for 2 seconds to  
Press SNOOZE / LIGHT to silence it for 8 minutes. The  
alarm 1 or alarm 2 icon will flash to show snooze is  
enabled.  
5. Press or to change the soothing sound.  
6. Press Sound / on / off to confirm.  
OR  
7. Press or to set the sleep timer to turn off after 120  
90 60 30 15 or 0 minutes. When 0 minutes is  
selected the soothing sound will automatically turn off  
after a few seconds.  
Press any key except SNOOZE / LIGHT to mute the alarm  
and activate it again in 24 hours.  
SLEEP TIMER / SOOTHING SOUND  
8. Press Sound /  
on / off to confirm the setting. SOUND  
You can choose 1 of 6 soothing sounds to play for a set  
time while you fall asleep:  
will flash on the LCD display to indicate that the sleep  
timer is activated.  
Bird  
Wind  
TALKING CLOCK  
River  
The talking clock can learn to turn the projector on, the  
alarm(s) on or off, and tell you the time, temperature and  
alarm status by listening to simple commands given by you.  
It can recognize commands from up to 2 users. The talking  
clock voice prompts take you through how to train and use  
this feature.  
Raindrop  
Waterfall  
Ocean Wave  
To turn the sleep timer ON:  
1. Press Sound / on / off once, this will automatically  
activate the last setting you used.  
8
RM998PAmanual-E  
8
05/1/20, 3:33 PM  
 
TRAIN THE TALKING CLOCK  
USE THE TALKING CLOCK (ONCE IT HAS BEEN  
TRAINED)  
To use the talking clock you need to train it to recognise  
your commands. To do this, follow the key steps below and  
listen to the clock’s voice prompts:  
Use the steps detailed below and listen to the voice prompts:  
TASK  
ACTION  
TASK  
ACTION  
Turn the talking clock ON  
Press Sound / on / off  
or TALK  
Start training program (1st time training) Press Sound /  
on /  
off or TALK  
Bypass the introduction  
Press TALK  
Select user 1 or 2  
Press or . Then  
press TALK  
Activate the talking clock when it is in  
Standby Mode  
Say your password  
Listen to trained commands  
Exit the talking clock  
Press TALK  
Tell the clock a word you would like to  
become your password. (This word will  
be used from now on to activate the  
talking clock)  
Say your password  
Let the unit idle and it will  
automatically go into  
Standby Mode  
Turn the talking clock OFF  
Press Sound /  
off twice  
on /  
Train the clock to recognize your  
Speak the command  
commands. To do this, devise your own twice when asked  
words for asking the clock to:  
Check the time  
NOTE When the talking clock is waiting for your voice  
commands, the icon will flash to show it is waiting.  
Check alarm 1 and 2 status  
Turn alarm 1 or 2 ON / OFF  
Check the temperature  
Turn the projector ON  
NOTE If the talking clock gets no response to its voice  
prompts after approx. 1 min, it will sound a beep and go into  
Standby Mode. To activate it, simply say your password.  
TIP The clock responds better to simple  
commands  
NOTE The talking clock has 4 languages available -  
English, Italian, French and Spanish.  
Skip to the next training command or  
train more commands  
Press  
Exit the training program  
Re-do the training program  
Press Sound / on / off  
Press and hold TALK  
9
RM998PAmanual-E  
9
05/1/20, 3:33 PM  
 
The talking clock language can be changed in the Clock  
Setting Mode, see the “Set Clock / Calendar” section for  
further information.  
unless the AC / DC adaptor is used.  
Adjust the FOCUS knob to make the image clearer.  
Adjust the IMAGE ROTATION knob to rotate the image  
clockwise or anti-clockwise.  
TALKING CLOCK VOLUME  
To change the talking clock volume, press or  
voice-activated function is on.  
when the  
Manually tilt the projection unit to position the image or  
press the 180° ROTATION button to reverse the image  
and turn it upside down.  
ERASE THE TALKING CLOCK TRAINED VOICE  
COMMANDS  
NOTE You can also press the SNOOZE / LIGHT button to  
project the time and alarm status for 8 seconds.  
1. Turn the AC adaptor power OFF and then ON again, or  
press RESET.  
2. Press and hold Sound / on / off and the screen below  
will appear.  
WAKE-UP VIBRATING ALARM – VR101A  
(OPTIONAL)  
The vibrating alarm receives a signal from the clock and  
performs a wake-up function by vibrating. It is designed to  
go under your pillow.  
The device has a range of roughly 50 feet and has an LED  
meter to show data transmission and battery level.  
3. Press TALK to erase the trained voice commands. The  
“IIII” icon will stop moving when the memory has been  
erased.OCK / CALENDAR  
The switch within the vibrating alarm can adjust to alarm 1  
or alarm 2, or both. Simply select the alarm time on the  
clock unit when you want the vibrating alarm to wake you  
up.  
PROJECTION UNIT  
The projection unit can display both time and alarm status.  
To use this feature:  
NOTE The vibrating alarm is powered by 2 x UM-3 / AA  
1.5V batteries. It is also compatible with rechargeable  
batteries.  
Slide the PROJECTION switch to ON to activate  
continuous projection. However, this function will not work  
10  
RM998PAmanual-E  
10  
05/1/20, 3:33 PM  
 
Do not scratch the LCD display.  
RESET THE CLOCK  
NOTE The technical specification of this product and  
contents of this user manual are subject to change without  
notice. Images not drawn to scale.  
Insert a thin blunt instrument into the hole below RESET to  
return to the default settings.  
WARNINGS  
This product is designed to give you years of service if  
handled properly. Oregon Scientific will not be responsible  
for any deviations in the usage of the device from those  
specified in the user instructions or any unapproved  
alterations or repairs of the product. Observe the following  
guidelines:  
Do not clean any part of the product with benzene, thinner  
or other solvent chemicals – this may cause permanent  
damage that is not covered by the guarantee. When  
necessary, clean it with a damp cloth.  
Never immerse the product in water. This can cause  
electrical shock and damage the product.  
Do not subject the product to extreme force, shock, or  
fluctuations in temperature or humidity.  
Do not tamper with the internal components.  
Do not mix new and old batteries or batteries of different  
types.  
Do not use rechargeable batteries with this product.  
Remove the batteries if storing this product for a long  
period of time.  
11  
RM998PAmanual-E  
11  
05/1/20, 3:33 PM  
 
TROUBLESHOOTING  
TECHNICAL SPECIFICATIONS  
TYPE  
DESCRIPTION  
PROBLEM  
SYMPTOM  
REMEDY  
Main Unit Dimensions  
L x W x H  
Clock time is not  
correctly set  
No atomic clock  
signal reception  
Place the clock far  
away from PCs,  
phones, and other  
electronic equipment  
and near a windowsill.  
Wait for at least 24  
hours  
6.34 x 1.18 x 4.06 inches  
(161 x 30 x 103 mm)  
Weight (without battery)  
Temperature  
Unit  
1.52 lbs (235 g)  
°F / °C  
No alarm  
Alarm does not  
sound  
Turn on the alarm  
setting  
Operating Range  
Indoor Range  
Resolution  
32°F to +122°F (0°C to +50°C)  
23°F to +122°F (-5°C to +50°C)  
0.2°F (0.1°C)  
Operation not  
normal  
Certain functions do  
not perform  
Reset the clock  
Main Unit  
Calendar  
Strange day  
Check it is set to your  
own language  
Atomic Clock Frequency  
System  
WWVB-60  
Clock  
Cannot change  
clock  
Disable the atomic  
clock signal and set  
manually  
Synchronization  
RF Frequency  
Auto or disabled  
433 MHz  
Clock / Calendar  
Cannot auto-  
synchronize the  
clock  
1. Adjust batteries  
2. Press RESET  
Reception Range (for  
optional VR101A)  
50 feet (15 meters) with no  
obstructions  
Main Unit Display  
Temperature  
Talking clock  
Shows “LLL” or  
“HHH”  
Temperature is out of  
range  
Clock  
HH:MM:SS  
HH:MM:Day of week  
HH:MM:Time zone hour offset  
Clock does not talk  
or respond to voice  
commands  
1. Check the AC  
adaptor is plugged  
in  
2. Check you are  
giving the clock a  
command it  
Hour Format  
Calendar  
12hr AM / PM  
DD / MM or MM / DD, user  
selectable. Weekday language:  
RM998PS – E, I, F and ES  
recognises. If the  
problem persists try  
re-training the clock  
using simpler  
Alarm  
Daily dual alarm  
2-minute crescendo  
8-minute snooze  
commands  
12  
RM998PAmanual-E  
12  
05/1/20, 3:33 PM  
 
Power  
ABOUT OREGON SCIENTIFIC  
Main Unit  
3 x UM-4 (AAA) 1.5V batteries or  
4.5V AC / DC adaptor  
about Oregon Scientific products such as digital cameras;  
MP3 players; children's electronic learning products and  
games; projection clocks; health and fitness gear; weather  
stations; and digital and conference phones. The website  
also includes contact information for our customer care  
department in case you need to reach us, as well as  
frequently asked questions and customer downloads.  
NOTE It is recommended that you use alkaline batteries  
with this product for longer performance.  
NOTE Design and specifications are subject to change  
without notice.  
NOTICES  
We hope you will find all the information you need on our  
website, however if you'd like to contact the Oregon Scientific  
Customer Care department directly, please visit: www2.  
oregonscientific.com/service/support OR Call 949-608-2848  
in the US.  
STATEMENT OF RESPONSIBILITY  
Oregon Scientific will not be held liable for any bodily injury,  
death, property damages, or any other claims of whatever  
nature resulting from the misuse or negligence of the  
product, whether intentional or unintentional.  
oregonscientific.com/about/international/default.asp  
Oregon Scientific will not be responsible for any deviations  
in the usage of the device from those specified in the user  
instructions or any approved alternations or repairs of the  
product.  
13  
RM998PAmanual-E  
13  
05/1/20, 3:33 PM  
 
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
FCC STATEMENT  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1) This  
device may not cause harmful interference, and (2) This  
device must accept any interference received, including  
interference that may cause undesired operation.  
Consult the dealer or an experienced radio / TV technician  
for help.  
DECLARATION OF CONFORMITY  
The following information is not to be used as contact for  
support or sales. Please call our customer service number  
the warranty card for this product) for all inquiries instead.  
WARNING Changes or modifications to this unit not  
expressly approved by the party responsible for compliance  
could void the user's authority to operate the equipment.  
NOTE This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation.  
We  
Name:  
Oregon Scientific, Inc.  
Address:  
19861 SW 95th Place, Tualatin, Oregon  
97062 USA  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful  
interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more  
of the following measures:  
Telephone No.: 1-800-853-8883  
Fax No.: 1-503-684-3332  
declare that the product  
Product No.:  
RM998PA  
Product Name: NAPOLI Voice Activated Weather Station  
Manufacturer:  
Address:  
IDT Technology Limited  
Block C, 9/F, Kaiser Estate, Phase 1,41  
Man Yue St.,Hung Hom, Kowloon,  
Hong Kong  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
14  
RM998PAmanual-E  
14  
05/1/20, 3:33 PM  
 
is in conformity with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: 1) This device may  
not cause harmful interference. 2) This device must accept  
any interference received, including interference that may  
cause undesired operation.  
15  
RM998PAmanual-E  
15  
05/1/20, 3:33 PM  
 
© 2005 Oregon Scientific. All rights reserved.  
P/N.: 086-003718-018  
 

Miele Oven 09 580 070 User Manual
Miele Vacuum Cleaner S 300I User Manual
Numark Industries DJ Equipment NUJV User Manual
Olympus Camcorder 227665 User Manual
Olympus Camcorder FE 47 User Manual
Omega Thermometer HH603A User Manual
One for All Universal Remote URC 4063 User Manual
Optimus Car Stereo System CD 8250 User Manual
Panasonic Switch 2SC5829 User Manual
Panasonic Switch 1200N User Manual