Oregon Scientific Watch SL110 User Manual

STOPWATCH MODE  
FCC STATEMENT  
CHRONOMÈTRE NUMÉRIQUE  
Model: SL110  
To operate stopwatch:  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1) This  
device may not cause harmful interference, and (2) This  
device must accept any interference received, including  
interference that may cause undesired operation.  
1. Navigate to stopwatch mode.  
2. Press START / STOP to start and stop timer.  
MODE D’EMPLOI  
SL110  
3. Press SPLIT / RESET to reset timer when paused and  
FR  
to split time measurements while timer is still running.  
FIG. 1  
WARNING  
Changes or modifications not expressly  
INTRODUCTION  
approved by the party responsible for compliance could void  
the user’s authority to operate the equipment.  
ALARM  
Merci d’avoir choisi ce chronomètre (SL110) d’Oregon  
ScientificTM. Conservez ce manuel car il contient instructions  
et des informations qui peuvent vous être utiles.  
1
4
5
To set alarm:  
NOTE  
This equipment has been tested and found to  
comply with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference  
in a residential installation.  
1. Navigate to Alarm Mode.  
2
3
2. Press SPLIT / RESET to select between hour / minute.  
VUE D’ENSEMBLE DE L’HORLOGE  
FACE AVANT (FIG. 1)  
6
3. Press START / STOP to scroll up and set the desired  
time. A indicates am and P indicates pm.  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
4. Press MODE to return to clock mode.  
1. SPLIT / RESET (FRACTURER / REINITIALISER) :  
Fracturez / réinitialisez le chronomètre; basculez les  
options de réglage  
To toggle alarm ON / OFF:  
2. Icône du jour de la semaine  
3. Icône AM / PM  
1. Press SPLIT / RESET to display alarm time in clock  
mode.  
2. To toggle the alarm ON / OFF press START / STOP  
4. MODE: Basculez entre les options  
while pressing and holding SPLIT / RESET. When  
7
5. START / STOP (COMMENCE / ARRETE): Commencez  
activated  
indicates alarm is ON.  
Reorient or relocate the receiving antenna.  
/ arrêtez le chronomètre; réglez les valeurs  
Increase the separation between the equipment and  
receiver.  
6.  
: Indique que l’alarme est activée  
To silence alarm:  
7. Gardeur de bride  
Press START / STOP to silence it for 5 minutes.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
OR  
SEQUENCE DE MODE  
Consult the dealer or an experienced radio  
technician for help.  
/
TV  
Press SPLIT / RESET to turn the alarm off. It will re-  
DIGITAL STOPWATCH  
Model: SL110  
activate after 24 hours.  
Appuyez MODE pour naviguer entre les modes:  
DECLARATION OF CONFORMITY  
PRECAUTIONS  
USER MANUAL  
The following information is not to be used as contact for  
support or sales. Please call our customer service number  
warranty card for this product) for all inquiries instead.  
Do not subject the unit to excessive force, shock, dust,  
temperature or humidity.  
EN  
Mode Horloge  
Mode Chronomètre  
Do not cover the ventilation holes with any items such as  
newspapers, curtains etc.  
INTRODUCTION  
We  
Thank you for selecting this Oregon ScientificTM Stopwatch.  
Please keep this manual for instructions and information you  
should know about.  
Do not immerse the unit in water. If you spill liquid over  
it, dry it immediately with a soft, lint-free cloth.  
Name:  
Oregon Scientific, Inc.  
Address:  
19861 SW 95th Ave.,  
Do not clean the unit with abrasive or corrosive materials.  
Tualatin, Oregon 97062 USA  
Do not tamper with the unit ’s internal components. This  
invalidates the warranty.  
Telephone No.:  
1-800-853-8883  
Mode de rglage heur / date  
Mode d’Alarme  
CLOCK OVERVIEW  
FRONT VIEW (FIG. 1)  
declare that the product  
Only use fresh batteries. Do not mix new and old  
batteries.  
Product No.:  
Product Name:  
Manufacturer:  
Address:  
SL110  
MODE HORLOGE  
1. SPLIT / RESET: Split / reset stopwatch; toggle setting  
Digital Stopwatch  
Images shown in this manual may differ from the actual  
display.  
options  
Appuyez START / STOP pour visualiser la date.  
Pour régler l’heur et la date:  
IDT Technology Limited  
2. Day icon  
Block C, 9/F, Kaiser Estate,  
Phase 1,41 Man Yue St., Hung  
Hom, Kowloon, Hong Kong  
When disposing of this product, ensure it is collected  
separately for special treatment.  
3. AM / PM icon  
1. Naviguez jusqu’au mode de réglage heur / date.  
4. MODE: Toggle between options  
5. START / STOP: Start / stop stopwatch; set values  
2. Appuyez START / STOP pour changer les valeurs.  
Appuyez et maintenez enfoncé pour rapidement  
parcheminer entre les valeurs.  
Placement of this product on certain types of wood  
may result in damage to its finish for which Oregon  
Scientific will not be responsible. Consult the furniture  
manufacturer’s care instructions for information.  
is in conformity with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: 1) This device may  
not cause harmful interference. 2) This device must accept  
any interference received, including interference that may  
cause undesired operation.  
6.  
: Indicates alarm is on  
3. Appuyez SPLIT / RESET pour aller jusqu’au prochain  
réglage. La séquence des réglages est: réglez les  
secondes à zéro, minute, heur / mode horaire 12 / 24,  
date, moi / jours de la semaine.  
7. Strap Keeper  
The contents of this manual may not be reproduced  
without the permission of the manufacturer.  
Do not dispose old batteries as unsorted municipal  
waste. Collection of such waste separately for special  
treatment is necessary.  
MODE SEQUENCE  
4. Appuyez MODE pour retourner au mode horloge  
Press MODE to navigate between modes:  
REMARQUE Appuyez et maintenez enfoncé START /  
STOP pour parcheminer entre les valeurs horaires et entre  
les modes horaires 12 / 24.  
Please note that some units are equipped with  
battery safety strip. Remove the strip from the battery  
compartment before first use.  
a
Clock Mode  
Stopwatch Mode  
NOTE The technical specifications for this product and the  
contents of the user manual are subject to change without  
notice.  
MODE CHRONOMETRE  
Pour fonctionner le chronomètre:  
1. Naviguez jusqu’au mode chronomètre.  
SPECIFICATIONS  
2. Appuyez START / STOP pour commencer et arrêter le  
chronomètre.  
TYPE  
DESCRIPTION  
3. AppuyezSPLIT/RESETpourréinitialiserlechronomètre  
quand il est mit sur pause et pour fracturer les mesures  
du chronomètre pendant qu’il est toujours en marche.  
L x W x H  
Weight  
60 x 23 x 70 mm (2.4 x 0.9 x 2.8 in)  
50 g (1.8 oz)  
Time / date setting Mode  
Alarm Mode  
Clock  
HH:MM:SS  
CLOCK MODE  
MODE ALARME  
Hour Format  
Calendar  
Alarm  
12 / 24 hour format  
Day / month-date  
To view the date press START / STOP.  
Pour régler l’alarme:  
5-minute snooze function  
1 x LR44 1.5V battery  
1. Naviguez jusqu’au mode d’alarme.  
To set time and date:  
2. Appuyez SPLIT / RESET pour sélectionner entre heure  
Power  
1. Navigate to time / date setting mode.  
/ minute.  
2. Press START / STOP to set the value. Press and hold to  
3. Appuyez START  
/
STOP pour parcheminer  
quickly scroll through the settings.  
ABOUT OREGON SCIENTIFIC  
progressivement jusqu’aux réglages désirés. A indique  
le matin et P l’après midi.  
3. Press SPLIT / RESET to move to the next setting. The  
setting sequence is: set seconds to zero, minute, hour /  
12 / 24 hour mode, date, month and weekday.  
about Oregon Scientific products.  
4. Appuyez MODE pour confirmer.  
If you’re in the US and would like to contact our Customer  
Care department directly, please visit:  
www2.oregonscientific.com/service/support.asp  
Pour basculer l’alarme sur ON / OFF:  
4. Press MODE to return to Clock mode.  
1. Appuyez SPLIT / RESET pour afficher l’heure de l’alarme  
pendant que vous êtes dans le mode d’horloge.  
NOTE Press and hold START / STOP to scroll through hour  
settings and 12 / 24 hour formats.  
2. Pour mettre l’alarme sur ON / OFF appuyez START /  
OR Call 1-800-853-8883.  
STOP pendant que vous maintenez enfoncé SPLIT /  
RESET. Lorsque l’alarme fut activée  
l’alarme est sur ON.  
indiquera que  
For international inquiries, please visit:  
www2.oregonscientific.com/about/international.asp.  
 
SL110_M_USA_OP.indd  
1
5/8/07 10:12:12 AM  

Miele Oven H 5981 BP User Manual
Miele Ventilation Hood DA250 4 User Manual
MSi Computer Hardware 845 PRO2 User Manual
NAD Stereo Amplifier S25 User Manual
Onkyo DVD Player DV HD805 User Manual
Panasonic Electric Shaver ES4012 User Manual
Panasonic Laptop CF VZSU39U User Manual
Panasonic Switch AM1 NZ BASIC User Manual
Panasonic Vacuum Cleaner MC CG985 User Manual
Parker Products Welder WCS SIF 01 User Manual