Samsung GH68 07476A User Manual

* Some of the descriptions in this manual may differ from your

phone, depending on the software installed or your service

provider.

SAMSUNG ELECTRONICS

Printed in Korea

Code No.:GH68-07476A

English. 07/2005. Rev 1.1

World Wide Web

http://www.samsungmobile.com

Use road safety at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 57.

Key in the emergency number for your present

location, then press

About this Guide

•

Tri-band operation

Use your phone in worldwide GSM networks, in

any of 900, 1800, and 1900 bands.

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

Special

features of your phone

In this guide, the following instruction icons appear:

Indicates that you need to pay careful

attention to the subsequent information

regarding safety or phone features.

•

Simple, bar-typed design with Intenna

Samsung’s powerful intenna technology allows

the best call quality without an annoying

external antenna.

Indicates that you can get more information

on the referenced page.

ꢀ

Indicates that you need to press the

Navigation keys to scroll to the specified

option and then select it.

→

•

WAP browser

Access the wireless web and

access various services and up-

to-the-minute information.

Indicates a key on the phone. For example,

[

]

[

]

Indicates a soft key, whose function is

< >

displayed on the phone screen. For example,

<Menu>

•

Phonebook

•

Calculator

Perform basic calculations and

do currency conversions.

Store up to 1000 home, office,

or cellular phone numbers for

your contacts.

Voice recorder

Record memos or sounds.

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, and sounds.

•

Calendar and To do list

Keep track of your daily and

monthly schedules and tasks.

Java

Enjoy Java™-based embedded

games and download new

games.

•

Alarm

Use your phone as an alarm

clock to wake you up in the

morning or notify you to an

event.

Use Phonebook ...................................................... 16

Send messages...................................................... 17

View messages....................................................... 18

Contents

Unpack

Enter text

Make sure you have each item

Your phone

ABC, Arabic, T9, Number, and Symbol mode

Call functions

Buttons, features, and locations

Get started

Advanced calling features

Menu functions

First steps to operating your phone

All menu options listed

Solve problems

Install and charge the phone..................................... 7

Power on or off........................................................ 8

Keys and display ..................................................... 9

Access menu functions ............................................ 11

Customise your phone............................................. 12

Make/answer calls .................................................. 14

Health and safety information

Index

Step outside the phone

Begin with your games, WAP, messages, and other special

features

Play games............................................................ 14

Browse WAP........................................................... 16

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 SIM AT

ꢀ

p.26

6 Funbox

ꢀ

p.41

8 Phonebook

ꢀp.49

4 Sound settings

ꢀp.31

1 WAP browser

2 Games

3 Sounds

4 Images

5 Delete all

6 Memory status

ꢀp.41

ꢀp.43

ꢀp.44

ꢀp.45

1 Search

ꢀp.49

ꢀp.50

ꢀp.51

1 Ring tone

2 Ring volume

3 Alert type

4 Keypad tone

5 Keypad volume

6 Message tone

7 Alert on call

8 Power on/off

9 Extra tones

ꢀ

p.31

p.32

2 New entry

3 Group search

4 Edit group

5 Speed dial

6 Delete all

7 Memory status

8 SDN*

2 Call records

ꢀp.26

1 Missed calls

2 Received calls

3 Dialled calls

4 Delete all

ꢀp.27

ꢀp.28

7 Organiser

ꢀp.45

5 Call time

6 Call cost^*

1 Alarm

2 Calendar

3 Time & Date

4 Calculator

5 To do list

6 Voice memo

7 Currency exchange

ꢀp.45

ꢀp.46

ꢀp.47

ꢀp.48

ꢀp.49

9 Phone settings

ꢀp.52

5 Messages

ꢀ

p.33

3 Network services

ꢀp.28

1 Display settings

2 Greeting message

3 Own number

4 Language

5 Security

6 Extra settings

7 Short cut

ꢀp.52

ꢀp.53

ꢀp.54

ꢀp.55

1 Text messages

2 Multimedia

messages

3 Push messages

4 Answering Machine

1 Call diverting

2 Call barring

3 Call waiting

4 Network selection

5 Caller ID

6 Closed user group

7 Band selection

ꢀp.28

ꢀp.29

ꢀp.30

ꢀp.31

ꢀ

p.37

p.40

p.41

8 Reset settings

*Shows only if supported by your

SIM card.

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Display

Headset jack

Phone

Travel adapter

User’s manual

Navigation keys

(Up/Down/Left/

Right)

WAP access/

Confirm key

Left soft key

Right soft key

Power on/off/

Menu exit key

Dial/Confirm

key

Battery

You can obtain various accessories from your local

Samsung dealer.

Cancel/Correct

key

Alphanumeric

keys

Special

function keys

The items supplied with your phone and the accessories

at your Samsung dealer may vary, depending on your

country or service provider.

Microphone

Get started

First steps to operating your phone

Install the battery.

Plug the travel

adapter into the

phone.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Remove the battery.

Insert the SIM card.

Plug the adapter into a standard AC wall outlet.

When the phone is completely charged (the

battery icon stops blinking), unplug the adapter

from the power outlet.

If the phone is already

on, first turn it off by

Make sure that the

gold-coloured contacts

on the card face down

into the phone.

holding [

Get started

Power on or off

Remove the adapter from the phone.

Power on

1. Press and hold [ ] to turn on

the phone.

Do not turn on

the phone when

mobile phone

2. If necessary, enter the PIN and

press <OK>.

use is prohibited.

Power off

1. Press and hold [ ].

Low battery indicator

When the battery is low:

•

a warning tone sounds,

the battery low message displays, and

the empty battery icon (

) blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Keys and display

Key(s)

Description

Key(s)

Description

Deletes characters from the display.

In Menu mode, returns to the previous menu

level.

Performs the function indicated on the

bottom line of the display.

Ends a call.

Hold down to switch the phone on and off.

In Menu mode, cancels input and returns the

phone to Idle mode.

In Idle mode, access your favourite menu

options.

ꢀp. 55

In Menu mode, scroll through the menu

options.

Enter numbers, letters, and some special

characters.

In Idle mode, hold [1] down to access your

In Idle mode, launches the Wireless

Application Protocol (WAP) browser.

In Menu mode, works the same functions as

the left soft key.

voicemail.

Enter special characters.

Sends or answers a call.

In Idle mode, retrieves the last number

dialled, missed, or received.

In Idle mode, hold

keypad. Hold

deactivate Silent mode.

[

]

down to lock the

[

]

down to activate or

Get started

Display

Layout

Out of your service area; you

cannot send or receive calls

Icons

(continued)

The display has the three areas.

New text message

Icons

displays various icons.

New voicemail message

New multimedia message

Active Silent mode or call ringer set

Text and graphics

displays messages,

instructions, and

information you enter.

to vibrateꢀp. 12, p. 31

Mute mode is active

ꢀp. 24

Soft key function

indicators

shows the current

functions assigned to the

two soft keys.

Menu Phonebook

Alarm set

Battery power level

Received signal strength

Call diverting feature is active

p. 28

Icons

ꢀ

GPRS network

Roaming

Keypad Lock mode is active

ꢀp. 13, p. 52

Call in progress

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> to confirm the

function displayed or option

highlighted.

Phonebook

4. To exit, choose either of the

following methods:

•

Press < > or [

up one level.

C] to move

Press the left soft

key to access

Menu mode.

Press the right soft

key to access the

Phonebook menu.

•

Press [ ] to return to Idle

mode.

Use shortcuts Press the number key

corresponding to the option you

want.

Get started

Customise your phone

You can set a wallpaper for the idle

screen.

Idle mode

wallpaper

1. In Idle mode, press <Menu

and select Phone settings

Language

→

Display

language

1. In Idle mode, press <Menu

→

and select Phone settings

Display settings

→

2. Select a language.

Wallpaper Wallpaper list

→

2. Scroll to the image you want.

1. In Idle mode, press <Menu

→

Call ringer

melody and

volume

3. Press <Select>.

and select Sound settings

Ring tone

2. Select a ringer melody.

3. Select Ring volume

You can switch the phone to Silent

mode to avoid disturbing other

people with your phone sounds.

Switch to

Silent mode

4. Adjust the volume level.

Press and hold [ ] in Idle mode.

5. Press <OK>.

You can protect the phone against

unauthorised use with a phone

password.

You can lock the keypad so that

accidental key presses does not

affect the phone functions.

Key lock

Phone lock

To lock the keypad:

1. In Idle mode, press <Menu

and select Phone settings

→

1. In Idle mode, press and hold

Security

password

2. Enter the default password,

→

Change

[

2. Press <Yes>.

To unlock the keypad:

“00000000” and press <OK>.

1. Press <Unlock

3. Enter a new 4- to 8- digit

2. Press [ ].

password and press <OK>.

4. Enter the new password again

and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Make/answer calls

Step outside the phone

Begin with your games, WAP, messages, and other special

features

1. Enter an area code and phone

Make a call

number.

Play games

2. Press [

3. To end the call, press [ ].

1. Press <Menu> and select Fun

box Games the game you

want.

2. Press [ ].

Select a game

→

1. When the phone is ringing,

Answer a call

press [

2. To end the call, press [ ].

3. Select game modes or press

any key.

Press [Up] or [Down].

Adjust the

volume during

a call

1. Press the Navigation keys to

move the selection.

Play

BubbleSmile

2. Press [1] or [3] to make a

horizontal or vertical line of

three identical bubbles.

4. When the red bar falls down to

the line on the scale, press [ ].

This selects the direction.

1. Press the Navigation keys to

move the selection to the

position you want to connect

the pipe.

Play Fun2link

The nearer the bar to the line,

the more exact the storke.

2. Press [ ] to insert a pipe.

5. Repeat until you finish the

entire holes.

3. Repeat until you complete the

pipeline.

1. Press [ ] to select a horse.

1. Press the Navigation keys to

check the field.

Play

MobileChess

Play Ultimate

Golf Challenge

2. Press the Navigation keys and

then [ ] to select the location

you want to place the horse.

2. Press [ ] to go to the stroke

mode

3. Press [ ], and press the key

again when the red bar moves

up to the top of the scale.

This selects the stroke strength.

Step outside the phone

Browse WAP

Use Phonebook

Using a built-in WAP (Wireless Access Protocol)

browser, you can get easy access to the wireless web

to receive a variety of updated services and

To the phone’s memory:

Add an entry

1. In Idle mode, enter a phone

information and to enjoy downloads of web contents.

number and press <Save>.

2. Select a number type.

In Idle mode, press [ ].

Launch the

browser

3. Select Phone

4. Enter a name and press <OK>.

5. Press <OK> to save the entry.

To the SIM card:

•

To scroll through browser items,

press [Up] or [Down].

To select an item, press [ ].

To return to the previous page,

Navigate

the web

1. In Idle mode, enter a phone

•

number and press <Save>.

press [C].

To access browser options,

press [ ].

2. Select a number type.

•

3. Select SIM

4. Enter a name and press <OK>.

5. Press <OK> to save the entry.

1. In Idle mode, press

Phonebook> and select

1. In Idle mode, press <Menu

and select Messages

Multimedia messages

Write new

Find an entry

Send a

multimedia

message (MMS)

→

2. Select an entry.

3. Select a number.

2. Enter the message subject

press <OK>.

4. Press [

] to dial, or

3. Select <Options> and add

<Options> to access options.

message contents.

4. When you have finished, press

Options> and select Send

5. Select a destination type.

6. Select one of Phone number

E-mail address, or

Phonebook

Send messages

1. In Idle mode, press <Menu

and select Messages Text

messages Write new

2. Enter the message text.

3. Press <Options> and select

Send a text

message (SMS)

→

7. Enter a destination number or

an e-mail address, or select

from Phonebook and press

Save and send or Send only

4. If you selected Save and send

<OK>.

select a memory location.

5. Enter a destination number and

press <OK>.

Step outside the phone

8. To add other destinations,

select Add destination and

repeat from step 6.

When a notification appears:

Send a

View a

multimedia

message

1. Press <View>.

multimedia

message(MMS)

(continued)

2. Press <Options> and select

Retrieve. The message

displays.

9. To add destinations of other

types, press < > and repeat

from step 5.

From the Inbox:

10.When you have finished, select

1. In Idle mode, press <Menu

and select Messages

Multimedia messages

Inbox

2. Select a message.

Send message

→

View messages

When a notification appears:

View a text

message

Press <View>. The message

displays.

From the Inbox:

1. In Idle mode, press <Menu

and select Messages

messages Inbox

2. Select a message.

→

Text

→

•

: ABC mode

Enter text

ABC, Arabic, T9, Number, and Symbol mode

: Arabic mode

: T9 mode

You can enter text for some features such as

messaging, Phonebook, or Organiser, using ABC

mode, Arabic mode, T9 mode, Number mode, and

Symbol mode.

: Number mode

No indicator: Symbol mode

Using ABC mode

Press the appropriate key until the character you want

appears on the screen.

Changing the text input mode

The text input mode indicator displays when the

cursor is in a text field.

Characters in order displayed

Key

Upper case

Lower case

Example: Writing a text message

Write new

Text input mode

indicator

Options

Press the right soft key to change the input mode:

space

Enter text

Tips for using ABC mode

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

Entering a word in T9 mode

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

•

Press [ ] to insert a space.

Press [ ] to change case. Capital lock ( ), Lower

case ( ), and Initial capital ( ) are available.

5], [5], and [6] to

•

Press [Left] or [Right] to move the cursor.

T9 predicts the word that you are typing, and it

may change with each key that you press.

Press [

and hold [

] to delete characters one by one. Press

C] to clear the display.

2. Enter the whole word before editing or deleting

characters.

•

Depending on your country, you may be able to

access an input mode for your specific language by

holding [ ].

3. When the word displays correctly, go to step 4.

Otherwise, press [

choices for the keys that you have pressed.

For example, Of and Me use [ ] and [ ].

0] to display alternative word

Using Arbic mode

You can use the Arabic writing mode. This mode has

the same properties as the English writing mode which

is explained above.

4. Press [ ] to insert a space and enter the next

word.

Tips for using T9 mode

•

Press [

automatically.

1] to enter periods or apostrophes

•

Press [ ] to change case in T9 mode. Capital lock

), Lower case ( ), and Initial capital ( ) are

available.

Using Symbol mode

Symbol mode enables you to insert symbols.

(

•

Press [Left] or [Right] to move the cursor.

Press

Press [

] to delete characters one by one. Press

display more symbols

select a symbol

[Up] or [Down].

and hold [

C] to clear the display.

the corresponding

number key.

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

clear the symbol(s)

insert the symbol(s)

[C].

<OK>.

2. Press [0] to display alternative words for your key

presses. When there are no more alternative

words, Add displays on the bottom line.

3. Press <Add>.

4. Enter the word you want using ABC mode and

press <OK>.

Using Number mode

Number mode enables you to enter numbers.

Press the keys corresponding to the digits you want.

Making a call from Phonebook

Call functions

Advanced calling features

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

Phonebook.ꢀp. 49

Making a call

1. In Idle mode, enter the area code and phone

number.

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

keys.

Dialling a number from the phone’s memory

1. In Idle mode, press and hold [ ]. A + appears.

ꢀp. 50

2. Press [

Press [C] to clear the last digit or press and hold

[

C] to clear the whole display. You can move the

2. Enter the location number for the phone number

you want and press [ ].

cursor to edit an incorrect digit.

3. Press [Up] or [Down] to scroll through other

numbers.

Making an international call

1. In Idle mode, press and hold [

0]. The

character

4. Press <Dial> or [

] to dial the number you

appears.

want.

2. Enter the country code, area code, and phone

number, then press [ ].

Dialling a number from the SIM card

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

Redialling recent numbers

1. In Idle mode, press [

recent numbers.

] to display the list of

2. Press [Up] or [Down] to scroll through other

numbers.

2. Scroll to the number you want and press [

3. Press <Dial> or [

] to dial the number you

want.

Ending a call

Viewing missed calls

Press [ ].

If you have missed calls, the screen displays how

many calls you have missed.

Answering a call

1. Press <View>.

2. If necessary, scroll through the missed calls.

When you receive an incoming call, the phone rings

and displays the incoming call image.

3. Press [

] to dial the number you want.

Press [

] or <Accept> to answer the call.

Using the headset

Tips for answering a call

Use the headset to make or answer calls without

holding the phone.

•

When Anykey answer in the Extra settings

menu is active, you can press any key to answer

a call, except for [ ] and <Reject>.

ꢀp. 54

Connect the headset to the jack on the left side of the

phone.

Press <Reject> or [ ] to reject a call.

The buttons on the headset work as listed below:

Press

redial the last call

answer a call

end a call

the button twice.

and hold the button.

Call functions

Muting or sending key tones

You can turn the key tones off or on.

Options during a call

You can access a number of functions during a call.

Press <Options> and select Mute keys or Send

Adjusting the volume during a call

keys

Use [Up/Down] to adjust the earpiece volume during a

call.

To communicate with answering machines or

computerised telephone systems, Send keys must

be selected.

Press [Up] to increase the volume level and [Down] to

decrease the volume level.

Sending a sequence of DTMF tones

Dual tone multi-frequency (DTMF) tones are the tones

used in phones for tone dialling.

Placing a call on hold/Retrieving

Press <Hold> or <Unhold> to place the call on hold

or retrieve the call.

You can send DTMF tones as a group after entering the

entire number you need to send or retrieving a

number from Phonebook. This feature is helpful for

entering a password or an account number when you

call an automated system, like a banking service.

Using the menu functions

Press <Options> and select Menu

Switching off the microphone

(

Mute mode)

1. When connected with a teleservice system, press

You can temporarily switch off your phone’s

microphone so that the other person on the phone

cannot hear you.

Options> and select Send DTMF

2. Enter the number you need to send and press

OK>.

Press <Options> and select Mute or Unmute

Setting up a multi-party call

Using Phonebook

1. Call the first participant.

You can access the Phonebook menu to locate or

store entries.

ꢀp. 49

2. Call the second participant. The first call is

automatically put on hold.

Press <Options> and select Phonebook

3. Press <Options> and select Join. The first

Answering a second call

participant is added to the multi-party call.

You can answer an incoming call, if your network

supports it and you have activated the call waiting

4. If desired, call another person or answer an

incoming call.

feature.ꢀp. 30

5. Press <Options> and select Join

1. Press [

] to answer the call. The first call is

6. Repeat steps 4 and 5 as desired.

automatically put on hold.

Having a private conversation with one

participant

2. Press <Swap> to switch between the calls.

3. Press <Options> and select End held call to end

1. Press <Options> and select Select one

2. Select a name or number from the participant list.

3. Select Private

the call on hold.

4. To end the current call, press [ ].

You can talk privately with that person, while the

other participants converse with each other.

Making a multi-party call

Use this feature to allow as many as six people to join

a multi-party call, or conference call.

4. To return to the multi-party call, press <Options

and select Join

Your service provider must support multi-party calls

for you to use this feature.

Dropping one participant

1. Press <Options> and select Select one

Menu functions

All menu options listed

2. Select a name or number from the participant list.

3. Press [Down] and select Remove

SIM AT (Menu 1)

The participant is dropped from the call, but the

call continues with the other parties.

This menu is available if you use a SIM AT card that

provides additional services, such as news, weather,

sports, entertainment, and location services. Available

services may vary, depending on your service

provider’s plans.

4. Press [ ] to end the multi-party call.

For details, see your SIM card instructions or contact

your service provider.

Call records (Menu 2)

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls.

To access this menu, press <Menu> in Idle mode and

select Call records

Missed calls (Menu 2.1)

Dialled calls (Menu 2.3)

This menu displays the most recently received calls

that you did not answer.

This menu displays the most recent calls you have

dialled.

Accessing a call record

1. Select a call record.

Delete all (Menu 2.4)

Use this menu to delete all of the records in each call

type.

2. Press [

] to dial or <Options> to access call

record options.

1. Press [ ] to check the call type(s) to be cleared.

2. Press <Delete>.

Using call options

When you press <Options>, the following options are

available:

3. Press <Yes> twice to confirm the deletion.

Edit: change the number of the selected call record.

Call time (Menu 2.5)

Delete: delete the selected call record.

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

Received calls (Menu 2.2)

This menu displays the most recent calls you have

received.

•

Last call time: check the length of your last call.

Total sent: check the total length of all the calls

you have dialled.

•

Total received: check the total length of all the

calls you have received.

Menu functions

•

Reset timers: reset the call timers. You need to

enter the phone password.

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated. You need

to enter your PIN2.

The password is preset to 00000000. You can

change this password.ꢀp. 54

Network services (Menu 3)

Call cost (Menu 2.6)

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

To access this menu, press <Menu> in Idle mode and

select Network services

•

Last call cost: check the cost of your last call.

Call diverting (Menu 3.1)

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

This network service reroutes incoming calls to a

phone number that you specify.

1. Select a call diverting option:

•

Max cost: check the maximum cost limit set in

•

Divert always: divert all calls.

Busy: diver calls when you are on another call.

No reply: divert calls when you do not answer

the phone.

Set max cost

Reset counters: reset the cost counters. You

need to enter your PIN2.

Set max cost: set the maximum cost authorised

for your calls. You need to enter your PIN2.

•

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

•

International except to home: only allow

calls to numbers within the current country

when you are abroad, and to your home

country, defined as where your home network

provider is located.

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

Cancel all: cancel all call diverting options.

2. Select the type of calls to be diverted.

•

3. To activate call diverting, press <Activate>.

Otherwise, press <Options> and select Remove

4. Enter the number to which calls are to be diverted

and press <OK>.

•

5. If you selected No reply, select the length of time

the network delays before diverting a call and

press <Select>.

Call barring (Menu 3.2)

2. Select the type of calls to be barred.

This network service allows you to restrict your calls.

1. Select a call barring option:

3. Press <Activate>. To deactivate call barring,

press <Deactivate>.

•

All outgoing: prohibit all outgoing calls.

International: prohibit international calls.

4. Enter the call barring password supplied by your

service provider and press <OK>.

Menu functions

Call waiting (Menu 3.3)

Caller ID (Menu 3.5)

This network service informs you when someone is

trying to reach you while you are on another call.

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

1. Select the type of calls to which the call waiting

option will apply.

•

Default: use the default setting provided by the

network.

2. Press <Activate>. To deactivate call waiting,

press <Deactivate>.

Hide number: ensure your number does not

display on the other person’s phone.

Network selection (Menu 3.4)

Send number: send your number each time you

make a call.

This network service allows you to either automatically

or manually select the network used when roaming

outside of your home area.

Closed user group (Menu 3.6)

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group, contact your

service provider.

•

Automatic: connect to the first available network

when roaming.

•

Index list: list, add, or delete CUG index

numbers. Press <Options> to access the options

for setting up an index list.

•

Manual: select the network you want.

•

Outside access: enable calls to numbers other

than those in the Closed user group. This feature

depends on the nature of your CUG subscription.

When you select a new band, your phone

automatically searches for all available networks. Your

phone registers with a preferred network within the

band.

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

Sound settings (Menu 4)

Use this menu to customise various sound settings.

•

Deactivate: deactivate the CUG function, if the

default group is enabled or a CUG index is

selected.

Ring tone (Menu 4.1)

Use this menu to select a ring tone for the call ringer.

You can select one of the default ring melodies,

downloaded sounds, or the melodies you have

created.

Band selection (Menu 3.7)

For the phone to make and receive phone calls, it

must register with an available network.

Ring volume (Menu 4.2)

Your phone can handle any of the following types of

networks: GSM 1900 and Combined GSM 900/1800.

Use this menu to adjust the ringer volume.

Alert type (Menu 4.3)

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you must remember to change to an

appropriate band.

Use this menu to specify how you are to be informed

of incoming calls.

•

Melody: the phone rings using the selected ring

tone.

Menu functions

•

Vibration: the phone vibrates but not rings.

Alert on call (Menu 4.7)

•

Vibra+melody: the phone vibrates three times

and then starts ringing.

Use this menu to select whether or not the phone

informs you when you receive a new message or when

the time for an alarm comes during a call.

Keypad tone (Menu 4.4)

Power on/off (Menu 4.8)

Use this menu to select the tone that the phone

sounds when you press a key.

Use this menu to select the melody that the phone

plays when it is switched on or off.

Keypad volume (Menu 4.5)

Extra tones (Menu 4.9)

Use this menu to adjust the keypad tone volume.

Use this menu to customise additional tones for the

phone.

Message tone (Menu 4.6)

Use this menu to select a ring tone or alert type for

incoming messages.

•

Error tone: set the phone to beep when you make

a mistake.

•

SMS tone: specify how you are informed of a new

SMS message.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

SMS-CB tone: specify how you are informed of a

new cell broadcast (CB) message.

•

Connect tone: set the phone to beep when it is

connected to the system.

MMS tone: specify how you are informed of a new

MMS message.

Repetition: set how open the phone reminds you

of new messages.

•

Delete: delete the message.

Send: forward the message.

Text reply: reply to the sender.

Call back: call the sender.

Messages (Menu 5)

Use the Messages menu to send and receive short

messages, and multimedia messages. You can also

use WAP push message, Voice mail, and Cell broadcast

message features.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

To access this menu, press <Menu> in Idle mode and

select Messages

•

Move to phone: move the message from the SIM

card to the phone’s memory.

Text messages (Menu 5.1)

Move to SIM: move the message from the

phone’s memory to the SIM card.

Short Message Service (SMS) allows you to send or

receive text messages including pictures, audio clips,

and animated images.

Select objects: save images or sounds from the

message into your phone.

The maximum number of characters allowed in a

short message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

Outbox (Menu 5.1.2)

You can view sent or saved text messages.

While viewing a message, press <Options> to access

the following options:

Inbox (Menu 5.1.1)

•

Delete: delete the message.

You can view received text messages in this menu.

Send: forward the message.

While viewing a message, press <Options> to access

the following options:

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Menu functions

•

Move to phone: move the message from the SIM

card to the phone’s memory.

3. Press <Options> and select Send only

Save

and send or Save only

•

Move to SIM: move the message from the

phone’s memory to the SIM card.

4. If you select Save and send or Save only, select

a memory location.

Select objects: save images or sounds from the

message into your phone.

5. Enter a destination number.

6. Press <OK> to send the message.

Write new (Menu 5.1.3)

Templates (Menu 5.1.4)

You can create and send a text message.

1. Enter your message.

You can preset maximum 5 templates to write a text

message.

You can enter up to 918 standard characters, or

approximately 402 Unicode characters, such as ‘â’.

While viewing the templates list, press <Options> to

access the following options:

2. Press <Options> to access the following options:

•

Edit: edit the template.

•

Add objects: add a sound, melody, picture, or

animated image to the message.

Send message: send the template as an SMS

message.

•

Add templates: retrieve a text template.

Add emoticon: retrieve an emoticon.

Add phonebook: add a Phonebook entry.

Add bookmark: add a web page’s address.

Language: change the language used in T9

input mode.

•

Delete: delete the template.

Emoticon template (Menu 5.1.5)

Your phone provides preset emoticons so that you can

use when writing a message. Use this menu to create

or edit emoticons.

While viewing the emoticon list, press <Options> to

access the following options:

Default validity: set the length of time your

messages are stored in the message centre while

the network attempts to deliver them.

•

Add: add a new emoticon.

Setting name: change the name of the setting

group.

Edit: edit the selected emoticon.

Send: send a message using the emoticon.

Delete: delete the emoticon.

•

Common settings: The following options are

available.

Settings (Menu 5.1.6)

Reply path: allow the recipient to reply to you

Use this menu to customise the SMS settings.

through your message centre.

Delivery reports: set the network to inform you

when your message has been delivered.

The setting options available in this menu may vary

depending on your service provider.

Bearer selection: select the GSM or GPRS

preferred bearer type.

•

Setting x (where

each group has its own submenu.

is the setting group number):

Delete all (Menu 5.1.7)

Service centre: store or changes the number of

your message centre.

Use this menu to delete all of SMS messages in each

message box.

Default destination: store a default destination

number.

1. Press [ ] to check the message box(es) to be

cleared.

Default type: set the default message type.

2. Press <Delete>.

3. Press <Yes> twice to confirm the deletion.

Menu functions

Memory status (Menu 5.1.8)

Broadcast (Menu 5.1.0)

Use this menu to check the number of SMS messages

you have stored and total number of SMS messages

you can store in each message box.

The Cell Broadcast service delivers short messages on

various topics such as the weather or traffic.

Use this menu to change the settings for the service

and access broadcast messages.

Voice mail (Menu 5.1.9)

•

Read: open received messages.

Use this menu to store the number of the voice mail

server and access your voice mails.

The Volatile box saves network messages until

the phone is switched off.

You must enter the voice server number before you

can access your voice mails. Your service provider

can give the voice server number.

The Archive box saves network messages

indefinitely. Press <Options> and select Save

when a text notification appears. The message is

saved in the Archive box.

•

Connect to voice server: connect to the voice

server to allow you to listen to your messages. You

can also connect to the voice mail server by

•

Receive: enable or disable the reception of

broadcast messages.

pressing and holding [1] in Idle mode.

Channel list: specify the channels from which you

receive broadcast messages.

Voice server number: change the voice mail

server name or number.

Language: select the language in which broadcast

messages display.

Please contact your service provider for details.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Multimedia messages (Menu 5.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, picture, and sound,

from phone to phone or from phone to e-mail.

•

Forward: forward the message to another person.

Save picture: save an image from the message

into the Images folder.

Inbox (Menu 5.2.1)

•

Save sound: save a sound from the message into

the Sounds folder.

This menu displays MMS messages that you have

received. The following icons tell you the message

status:

Properties: view the message properties.

When you select a notification, you can access

Retrieve to retrieve the message from the MMS

server.

•

notification that you have read

notification that you have not read

you are retrieving from the server

the server is processing your request

the server is failed to send

you have read

Outbox (Menu 5.2.2)

This menu displays MMS messages that you have

sent. The following icons tell you the message status:

•

currently being sent

sent

you have not read

While viewing a message, press <Options> to access

the following message options:

your phone couldn’t send

to be sent

•

Delete: delete the message.

Reply: reply to the sender.

Callback: call the sender.

deferred

Menu functions

While viewing a message, press <Options> to access

the following options:

•

Add sound: add a sound clip to the message.

Send: send the message.

Save: save the message in the Draft or

Templates box.

Settings: change the message settings.

Add destination: enter destination numbers

or addresses.

•

Delete: delete the message.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Send: send or resend the message.

Edit message: edit the message.

Properties: view the message properties.

•

Preview: view the message you created.

3. If you want to change the added items, highlight

one and press <Options> to access the following

options:

Draft (Menu 5.2.3)

After creating a multimedia message, you can store it

in this message box for sending later.

•

Edit text/picture/sound: edit the text,

picture, or sound.

You can view a message and use the options the same

•

Add page: add pages. Move to each page by

pressing [Left] or [Right] on the message

screen.

Delete: delete the item from your message.

Duration: set how long one page displays.

After the specified time, the display

automatically scrolls to the next page.

as in Outbox

Write new (Menu 5.2.4)

You can create and send an MMS message.

1. Enter a message subject and press <OK>.

•

2. Press <Options> and add message contents using

one of the following options:

4. When you have finished, select Send from the

•

Add text: add message text.

Add picture: add a picture to the message.

options.

5. Select a destination type (To, Cc, Bcc).

6. Select one of Phone number E-mail address, or

Phonebook

Delete all (Menu 5.2.6)

Use this menu to delete all of the messages in each

message box.

7. Enter a destination number or an e-mail address,

or select an entry from Phonebook and press

1. Press [ ] to check the message box(es) to be

cleared.

<OK>.

2. Press <Delete>.

8. To add more destinations, select Add destination

3. Press <Yes> twice to confirm the deletion.

and repeat from step 6.

Memory status (Menu 5.2.7)

9. To enter additional numbers or addresses to other

Use this menu to view the amount of memory

available for MMS messages and memory currently in

use in each message box.

destination types, press < >and repeat from step

10.When you have finished, select Send message

Setup (Menu 5.2.8)

Templates (Menu 5.2.5)

You can customise the settings for sending and

receiving MMS messages.

This menu stores messages you saved as templates so

that you can use them to create new messages.

•

Delivery report: set the network to inform you

when your message has been delivered.

While viewing a message template, press <Options

to access the following options:

•

Read reply: request a reply from the recipient.

•

Edit message: send the message using the

template.

Auto download: set whether or not your phone

retrieves new incoming messages from the MMS

server without notifications.

Delete: delete the template.

Menu functions

•

Message acceptance: select the category of

messages you want to receive.

•

Profile name: assign a name to the MMS profile.

Connection URL: enter the address of your MMS

•

Hide ID: hide your phone number on the

recipient’s phone.

server.

•

Security: select a data transmission mode.

IP address: enter the gateway address.

User name: assign the user ID.

Expiry date: set the length of time your messages

are stored in the message centre.

Delivery time: set the time delay before

messages are sent.

Password: enter the password.

APN: enter the access point name used for the

address of the MMS server.

•

Priority: set the priority level of your messages.

Report allowed: send a delivery report from the

network to the sender.

Push messages (Menu 5.3)

•

Page duration: set how long one page in your

outgoing messages displays. After a specified time,

the display automatically scrolls to the next page.

Use this menu to access messages from the WAP

server.

•

Inbox: view push messages you have received.

MMS profile (Menu 5.2.9)

Receive: determine whether or not your phone

You can configure required network settings for MMS.

The last profile accessed is automatically activated for

sending or receiving subsequent messages.

receives push messages.

Never: the phone rejects push messages.

Always: the phone receives all push messages.

Delete all: delete all of push messages.

Check with your service provider before you change

any MMS settings on your phone.

•

Answering Machine (Menu 5.4)

Funbox (Menu 6)

Use this menu to inform callers of your current

situation and to guide them to leaving messages.

The Funbox menu allows you to use the WAP browser,

play Java games, and access images and sounds

stored in the phone’s memory.

You can take the call by pressing <Accept> while

this feature is activated.

To access this menu, press <Menu> in Idle mode and

select Funbox

•

Inbox: listen to or delete the message that a

caller leave.

WAP browser (Menu 6.1)

Settings

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

Using the WAP browser, you can access updated

information and a wide variety of media content, such

as wallpapers and ring tones.

Activate: turn on or off this feature.

Screen Setting: when this feature is enabled, you

can listen to the caller’s recording voice while the

caller is recording the message.

Time setting: set the time interval from receiving

a call signal till activating the answer phone

feature.

Home (Menu 6.1.1)

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

provider. You can also press [ ] in Idle mode.

Record my greeting: record the message to

guide.

Select the greeting: The phone offers two

default messages, and one message of your own.

You can select User recording only when you have

recorded your own message.

•

Delete all: delete the recorded message.

Menu functions

Navigating with the WAP browser

•

Inbox: read messages received from a web

server.

Press

Exiting the WAP browser

scroll through browser items

select a browser item

return to the previous page

[Up] or [Down].

[ ].

Press [ ] to exit the browser.

Favorite (Menu 6.1.2)

[C].

Use this menu to save URL addresses to quickly access

a website.

Selecting and using browser menu options

Adding a favorite

From any web page, press and hold [ ] to access the

following browser options:

1. Select an empty location.

2. Enter a URL address and press <Enter>.

3. Enter a name for the favorite and press <Enter>.

•

Reload: reload the current page.

Home: go back to the homepage.

Goto URL: enter a URL address manually.

Using favorite options

After saving an item, press <Options> to access the

following options:

Show URL: view the URL address of the current

web page.

•

Go to URL: access the website.

•

Edit home: change the page to be used for your

homepage.

Edit: edit the address and name of the favorite.

Delete: delete the favorite.

Clear cache: delete information stored in the

cache.

When the bearer is set to Data

http:// (Menu 6.1.3)

•

IP address: enter the WAP gateway address.

Use this menu to manually enter the URL address of a

website and access the website.

Password: enter the password.

Settings (Menu 6.1.4)

Dial-up number: enter the PPP server phone

number.

Use this menu to set up servers for the WAP browser.

Contact your service provider for details about your

settings options.

•

Data call type: select a data call type.

For each server, the following options are available:

Clear cache (Menu 6.1.5)

•

Profile name: assign a name to the server profile.

Use this menu to clear the cache, which is the

temporary memory that stores the web pages you

have recently accessed.

Homepage URL: set the address of your

homepage.

•

Security: select a data transmission mode.

Games (Menu 6.2)

Bearer: select a bearer for each type of network

address accessed; GPRS or Data

You can download MIDlets (Java applications that run

on mobile phones) from various sources using the

WAP browser, and store them in your phone.

When the bearer is set to GPRS

•

IP address: enter the WAP gateway address.

User name: enter the user ID.

Java services may not available, depending on your

service provider.

Password: enter the password.

APN: enter the access point name of the GPRS

network gateway.

Menu functions

3. Enter the secondary address and press <OK>.

Launching a game

1. Select the game you want on the Games list.

Sounds (Menu 6.3)

2. On the startup screen of the game, you can access

the following options:

This menu displays sounds downloaded from the

wireless web or received in messages.

•

START GAME: start a new game.

CONTINUE: continue the last game you

played.

While accessing a sound, press <Options> to access

the following options:

•

HIGH SCORE: view the high score table. This

option may not be available for some games.

HOW TO PLAY: view how to play the game

and the key functions for the game.

OPTION: switch on or off the game sound.

•

Rename: change the name of the sound.

Delete: delete the sound.

Set as ringtone: set the sound as your ring tone.

Images (Menu 6.4)

3. Press [ ] to confirm your selection.

This menu displays images downloaded from the

wireless web or received in messages.

Viewing game information

Scroll to the game you want and press <Info>.

While accessing an image, press <Options> to access

the following options:

Changing DNS settings

•

Rename: change the name of the image.

You may need to change the DNS setting of the Java

server at your service provider’s instructions.

Delete: delete the image.

Set as wallpaper: set the image as your

wallpaper for the idle screen.

1. Select Setting on the Games list.

2. Enter the primary address and press <OK>.

Delete all (Menu 6.5)

Alarm (Menu 7.1)

You can delete all of the downloaded items in the

Use this menu to set alarms to ring at a specific time.

Games Sounds, and Images folders.

Setting an alarm

1. Select the type of alarm.

1. Press [ ] to check the folder(s) to be cleared.

2. Press <Delete>.

2. Enter the time for the alarm to sound.

3. Select AM or PM in 12-hour time format.

Your phone is preset to a 24-hour format. You

3. Press <Yes> twice to confirm the deletion.

Memory status (Menu 6.6)

can change the time format.

ꢀp. 47

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

4. If you selected Morning call in step 1, choose

Saturday to Wednesdayor Saturday to

Thursday

Organiser (Menu 7)

Stopping an alarm

•

When the alarm sounds, press any key.

To remove an alarm set, access it, press

The Organiser feature enables you to keep track of

your schedule and tasks, and to make a voice memo.

You can also set the time and date and use convenient

features, such as alarms, calculator, and currency

converter.

<Options> and select Remove alarm.

•

To remove all alarm sets, select Remove alarm

from the Alarm menu.

To access this menu, press <Menu> in Idle mode and

select Organiser

Menu functions

The colour of the date on the calendar changes to

red to indicate that a memo exists for that date.

Setting the alarm to ring even if the phone is

off

From the Alarm screen, select Autopower

→

Enable.

Viewing a memo

If the phone is off when it is time for the alarm to ring,

the phone switches on and sounds the alarm.

1. Select a date which has memos from the calendar.

2. Press [Left] or [Right] to view other memos

scheduled for that day.

Calendar (Menu 7.2)

Using calendar memo options

Use this menu to consult the calendar, write memos,

or set alarms to act as a reminder.

On the calendar screen, press <Options> to access

the following options:

Writing a memo

1. Select a date on the calendar.

2. Enter your memo and press <OK>.

•

Search all: view all of the memos you created.

Delete all: delete all memos.

Go to date: go to a specific date.

3. Press [ ] to set an alarm to ring on the chosen

day.

Convert Calendar: Change the claendar format

to Gregorian Islamic, and Persian.

While viewing a memo, press <Options> to access

the following options:

Otherwise, press <Skip>.

4. Enter the time for the alarm.

•

New: add a new memo.

Edit: edit the memo.

Alarm: set an alarm for the memo.

Delete: delete the memo.

Copy to: copy the memo to another date.

Move to: change the date of the memo.

To select an alarm melody, press <Melody>.

5. Select AM or PM in 12-hour format.

Your phone is set to a 24-hour format. You can

change the format.

ꢀp. 47

4. Press [ ] to view the result.

Time & Date (Menu 7.3)

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

To do list (Menu 7.5)

Use this menu to create tasks and manage them.

specify your time zone in World time

•

Set time: enter the current time.

Creating the To do list

1. Press <New>.

Set date: enter the current date.

World time: set your local time zone and find out

what time it is in another part of the world.

2. Enter the first task and press <OK>.

3. Select a priority level.

•

Time format: select 12-hour or 24-hour time

format.

4. Enter your deadline and press [ ].

Viewing the To do list

Calculator (Menu 7.4)

When you select the To do list menu, the tasks display

with a check mark, if the task has been done, and a

Use this menu to perform basic arithmetic functions

such as addition, subtraction, multiplication, and

division.

priority level indicator;

and for Low.

To change the status of a specific task, press [

for High,

for Normal,

1. Enter the first number.

Press <.()> to insert a decimal point or a bracket.

While viewing a task or the task list, press <Options

to access the following options:

Press

[

] or [ ] to move the cursor.

•

New: add a new task.

2. Press the Navigation keys to access the math

function you want.

Mark: change the status of the task.

Edit: edit the task.

3. Enter the second number.

Menu functions

•

Sort: sort the task by priority or status.

•

Quit: cancel your recording and exits the

Voice memo menu.

•

Copy: copy the task.

4. Select Save to save the voice memo.

Copy to calendar: copy the task to the calendar

as a memo.

5. Enter a name of the voice memo and press <OK>.

•

Delete: delete the task.

Memo list (Menu 7.6.2)

Delete all: delete all tasks.

Exit: exit the To do list menu.

Use this menu to access the list of voice memos you

have recorded. Select a memo to play it

Press <Options> to access the following options:

Voice memo (Menu 7.6)

•

Play: play back your voice memo.

Use this menu to record voice memos. A voice memo

can be up to 30 seconds.

Send: send the voice memo via MMS.

Rename: change the name of the voice memo.

Voice record (Menu 7.6.1)

1. Press <Record> to start recording.

2. Speak into the microphone.

Properties: view the properties of the voice

memo.

•

Delete: delete the voice memo.

3. When you press <Stop>, or if the recording time

Delete all (Menu 7.6.3)

expires, the following options display:

Use this menu to delete all of the voice memos you

have recorded at one time.

•

Replay: play back your memo.

Re-record: discard the memo and records

another one.

Memory status (Menu 7.6.4)

•

Save: save the memo.

You can check the total amount of memory and the

amount of memory currently in use for voice memos.

1. Enter the first few letters of the name that you

want to find.

Currency exchange (Menu 7.7)

Use this menu to do currency conversions.

2. Select the name you want from the list.

1. Enter the rate of foreign currency and press

3. Press [

] to dial the number, or <Options> to

<OK>.

access Phonebook options.

2. Enter the amount of the source currency you want

Using Phonebook options

to convert and press <OK>.

The amount you entered and its equivalent value

in the foreign currency display.

While viewing an entry in Phonebook, press

<Options> to access the following options:

•

Paste: paste the number into the normal dialling

mode.

Phonebook (Menu 8)

•

Edit: edit the entry information.

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

Delete: delete the number from Phonebook.

Copy: copy the number to the phone’s memory or

SIM card.

To access this menu, press <Menu> in Idle mode and

select Phonebook, or press <Phonebook>.

•

Caller group: assign a caller group.

Add entry: add a new entry.

Search (Menu 8.1)

New entry (Menu 8.2)

Use this menu to search for numbers in Phonebook.

Finding an entry

Use this menu to add a new entry to Phonebook.

Menu functions

2. Select a group and press <View>.

Storing an entry in the phone’s memory

1. Select a number type.

3. Select the name you want.

2. Select Phone

4. Press [

] to dial the number or <Options> to

access Phonebook options.

3. Enter a name and press <OK>.

4. Enter a number or an e-mail address and press

Edit group (Menu 8.4)

<Save>.

Use this menu to edit your caller groups’ properties.

5. Change the location number, if you want, and

press <OK>.

From the group list, press <Options> to access the

following options:

Storing an entry on the SIM card

1. Select a number type.

•

Call ring tone: set a ring tone for incoming calls

from the group.

2. Select SIM

SMS tone: set a ring tone for incoming messages

from the group.

3. Enter a name and press <OK>.

4. Enter a number and press <Save

Graphic: set a graphic icon for incoming calls from

the group.

5. Change the location number, if you want, and

press <OK>.

Group name: assign a name to the group.

Group search (Menu 8.3)

Speed dial (Menu 8.5)

Use this menu to search your entries in Phonebook in

caller groups.

Use this menu to assign speed dial numbers (2 to 9) to

eight of your most frequently called numbers.

1. Enter the first few letters of the group name.

1. Press [ ] to check the location(s) to be cleared.

2. Press <Delete>.

Assigning speed dial entries

1. Select a key location from

for your voice mail server.

9. Key

is reserved

3. Enter the phone password and press <OK>.

4. Press <Yes> twice to confirm the deletion.

2. Select the name you want from the Phonebook list.

3. Select the number you want.

Memory status (Menu 8.7)

Managing speed dial entries

Use this menu to check the total number of entries

you can store and the number of the entries you have

stored in Phonebook.

While viewing the Speed dial screen, press

<Options> to access the following options:

•

Change: assign a different number to an assigned

key.

SDN (Menu 8.8)

•

Delete: delete the setting for the key.

This menu is available if your SIM card supports

Service Dialling Numbers (SDN). Use this menu to

view the list of SDNs assigned by your service

provider, including emergency numbers, directory

enquiries, and voice mail numbers.

Delete all: delete the settings for all the keys.

Number: view the number assigned to the key.

Dialling speed dial entries

Press and hold the appropriate key in Idle mode.

Scroll to the number you want and press <Dial> or

[

Delete all (Menu 8.6)

Use this menu to delete all of the entries from

Phonebook.

Menu functions

Use this menu to set whether the phone locks the

keypad automatically if no key has been pressed

within a given period of time, or you lock the keypad

manually by holding [ ].

Phone settings (Menu 9)

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

To access this menu, press <Menu> in Idle mode and

Contrast (Menu 9.1.3)

select Phone settings

You can adjust the brightness of the display for

varying lighting conditions.

Display settings (Menu 9.1)

Backlight (Menu 9.1.4)

Use this menu to change settings for the display and

light.

You can select the length of time the backlight and the

display stay on.

Wallpaper (Menu 9.1.1)

•

On: select the length of time the backlight stays

on.

You can change the background image and the

settings for the text of Idle mode.

•

Dim: select the length of time the display is in

Dimming mode after the backlight turns off. After a

specified time, the display turns off and the

analogue clock displays.

•

Wallpaper list: select a background image.

Text display: determine the phone displays the

time and date.

•

Text colour: select a colour of the text

Graphic logo (Menu 9.1.5)

Auto keypad lock (Menu 9.1.2)

Use this menu to display your service provider’s logo

instead of its name.

Your phone is equipped with Keypad Lock function, to

prevent accidental key presses from affecting the

phone.

Dialling font colour (Menu 9.1.6)

Security (Menu 9.5)

Use this menu to select the colour type of the font for

digits to be displayed when you enter a phone number

for dialling.

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

If you enter an incorrect PIN /PIN 2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

network operator.

Greeting message (Menu 9.2)

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

Own number (Menu 9.3)

PIN check (Menu 9.5.1)

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

The 4-to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

Language (Menu 9.4)

Change PIN (Menu 9.5.2)

Use this menu to select one of several languages for

the display text.

Use this menu to change your PIN. The PIN Check

feature must be enabled to use this feature.

When you select Automatic, the phone uses the

language that the SIM card uses.

Phone lock (Menu 9.5.3)

The Phone lock feature locks the phone from

unauthorised use.

Menu functions

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

FDN mode (Menu 9.5.7)

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card. To use this feature, you must enter your

PIN2.

The password is preset to 00000000. To change the

password, use the Change password menu.

Change password (Menu 9.5.4)

Use this menu to change your phone password. The

Change PIN2 (Menu 9.5.8)

password is preset to 00000000

If supported by your SIM card, the Change PIN2

feature changes your current PIN2.

Privacy (Menu 9.5.5)

Use this menu to lock your media contents, including

MMS messages, voice memos, images, and sounds.

Extra settings (Menu 9.6)

1. Press [ ] to check the item(s) to be locked.

2. Press <OK> to lock the marked items.

3. Enter the phone password and press <OK>.

You can turn the automatic redialling or answering

features on or off.

•

Auto redial: make up to ten attempts to redial a

phone number after an unsuccessful call.

To access a locked item, you need to enter the phone

password.

•

Anykey answer: answer an incoming call by

pressing any key, except [ ] or <Reject>.

SIM lock (Menu 9.5.6)

When this option is disabled, you must press [

or <Accept> to answer a call.

]

The SIM lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

Short cut (Menu 9.7)

Solve problems

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

You can use the Navigation keys as shortcut keys to

access specific menus directly from Idle mode. Use

this menu to change the shortcut assignments for the

keys.

When you switch on your phone, the following

messages may appear:

1. Select the key to be used as a shortcut key.

2. Select the menu that will be assigned to the key.

“Insert SIM card”

Reset settings (Menu 9.8)

•

Be sure that the SIM card is correctly installed.

Use this menu to reset the phone to its default

settings.

“Phone locked Enter password”

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

Enter the 4- to 8-digit phone password and press

OK>.

The password is preset to 00000000. You can

change this password. p. 54

“Enter PIN”

ꢀ

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

The PIN Check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Solve problems

“Enter PUK”

Your correspondent cannot reach you

•

The PIN code has been entered incorrectly three

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

•

Be sure your phone is switched on. ([ ] pressed

for more than one second.)

Be sure you are accessing the correct cellular

network.

“No service,” “Network failure,” or “Not done”

displays

•

Be sure that you have not set an outgoing call

barring option.

The network connection has been lost. You may be

in a weak signal area. Move and try again.

Your correspondent cannot hear you speaking

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

Be sure you have switched off the microphone.

Be sure you are holding the phone close enough to

your mouth. The microphone is located at the

bottom of the phone.

You have entered a number but it was not

dialled

•

The phone starts beeping and “Low battery”

flashes on the display

•

Be sure that you have pressed [ ].

Be sure you have accessed the right cellular

network.

Your battery is insufficiently charged. Recharge the

battery.

•

Be sure that you have not set an outgoing call

barring option.

The audio quality of the call is poor

Health and safety information

SAR certification information

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as recommended

by the EU Council. These limits are part of comprehensive

guidelines and establish permitted levels of RF energy for

the general population. The guidelines were developed by

independent scientific organisations through the periodic

and thorough evaluation of scientific studies. The limits

include a substantial safety margin designed to ensure the

safety of all persons, regardless of age and health.

No number is dialled when you re-call a

Contacts entry

•

Use the Phonebook Search feature to ensure the

number has been stored correctly.

•

Re-store the number, if necessary.

If the above guidelines do not help you to

solve the problem, take note of:

The exposure standard for mobile phones employs a unit of

measurement known as Specific Absorption Rate (SAR).

•

The model and serial numbers of your phone

Your warranty details

The SAR limit recommended by the EU Council is 2.0W/kg.

A clear description of the problem

The highest SAR value for this model phone was 0.348W/kg.

Then contact your local dealer or Samsung after-sales

service.

* The SAR limit for mobile phones used by the public is 2.0 watts/

kilogram (W/kg) averaged over ten grams of body tissue. The

limit incorporates a substantial margin of safety to give addi-

tional protection for the public and to account for any variations

in measurements. The SAR values may vary, depending on

national reporting requirements and the network band.

Health and safety information

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged. Li-

ion batteries are particularly affected by temperatures

below 0°C (32°F).

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

•

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

•

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

Electronic devices

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

When driving a car, driving is your first responsibility.

When using your wireless phone while driving, follow local

regulations in the country or region you are in.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

Hearing aids

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel.

Health and safety information

Other medical devices

Potentially explosive environments

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

Your physician may be able to assist you in obtaining this

information.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Emergency calls

Other important safety information

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

•

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

•

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

•

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

3. Press [

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

Health and safety information

•

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Care and maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep the phone and all its parts and accessories out of

the reach of small children.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

•

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Index

missed • 27

received • 27

Call time • 27

Caller ID • 30

Calls

layout • 10

settings • 52

DTMF tones, send • 24

ABC mode, text input • 19

Alarm • 45

Key tones

sending • 24

setting • 32

Alert • 31, 32

Answering

Keys, description • 9

Emergency calls • 61

Extra tones 32

answering • 23

barring • 29

holding • 24

redialling • 22

rejecting • 23

call • 23

second call • 25

Answering machine • 41

Anykey answer • 54

Auto redial • 54

Language, select • 53

Last number, redial • 22

Locking

FDN (Fixed Dial Number) mode

• 54

phone • 53

waiting • 30

Funbox • 41

SIM card • 54

Low battery indicator • 8

CB (Cell Broadcast) messages •

Characters, enter • 19

Conference call • 25

Connection tone • 32

Backlight time, set • 52

Band selection • 31

Barring, calls • 29

Battery

Games • 43

Greeting message • 53

Memory status

downloaded items • 45

messages • 39

phonebook • 51

Message tone • 32

Messages

charging • 7

Holding, call • 24

low indicator • 8

precautions • 58

Broadcast messages • 36

Browser, WAP • 41

Deleting

call records • 26

MMS • 37, 38

phonebook • 51

SMS • 33

Icons, description • 10

Images, downloaded • 44

Inbox, messages

MMS • 37

SMS • 33

International calls • 22

Internet • 41

cell broadcast • 36

greeting • 53

MMS • 37

SMS • 33

voice • 36

Calculator • 47

Call costs • 28

Call records

dialled • 27

Delivery reports, message • 39

Dialled calls • 27

Display

web • 40

Index

Minute minder • 32

Missed calls • 27

MMS messages

call barring • 29

phone • 54

manually • 22

Resetting phone • 55

Ring

tone • 31

volume • 31

Road safety • 59

Templates

Phone

MMS • 38

creating/sending • 38

deleting • 38

setting • 39

care and maintenance •

SMS • 34

Text input mode, change • 19

Text, enter • 19

Tone

display • 10

icons • 10

locking • 53

resetting • 55

switching on/off • 8

unpacking • 6

viewing • 37

Multi-party calls • 25

Muting

call ringer • 31

connect • 32

extra • 32

keypad • 32

message • 32

power on/off • 32

Safety

information • 57

precautions • 3

SDN(ServiceDiallingNumbers)

• 51

Security, calls • 53

Sent messages

MMS • 37

key tones • 24

microphone • 24

Phonebook

Names

entering • 19

searching • 49

Network selection • 30

Network services • 28

Number

copying • 49

deleting • 51

editing • 49

options • 49

speed dialling • 50

Voice mail • 36

Voice memos

recording • 48

Voicemail server • 36

SMS • 33

SIM card

inserting • 7

locking • 54

changing • 53

locking • 53

PIN2, change • 54

Power on/off tone • 32

Privacy • 54

dialling/searching • 22

storing • 49

SMS messages

creating/sending • 34

viewing • 33

Sound settings • 31

Sounds, downloaded • 44

Speed dial • 50

Switching on/off

microphone • 24

phone • 8

Waiting call • 30

WAP browser

access • 41

Organiser • 45

Outbox, messages

MMS • 37

bookmarks • 42

cache, clear • 43

World time • 45

Received calls • 27

Recording

voice memos • 48

Redialling

SMS • 33

Own number • 53

automatically • 54

Password

Toastmaster TCM12C User Manual
Sony SCD XA1200ES User Manual
Sony Ericsson S710 User Manual
Siemens TDMA 800 User Manual
Roberts Radio CR9976 User Manual
Rhino Mounts RHINO TW144 User Manual
Research In Motion Blackberry Cell Phone 8230 User Manual
Pioneer DEH 3300R User Manual
Philips AJ3910 User Manual
Nokia ESERIES E66 User Manual