Siemens CXT65 User Manual

mobile

Issued by

Information and Communication mobile

Haidenauplatz 1

D-81667 Munich

Rights of modification reserved.

Designed for life

Siemens Aktiengesellschaft

www.siemens-mobile.com

CX65

CXT65

CXV65

Table of Contents

Con-

Safety precautions ..................... 3

Telephone list (schematic) ......... 5

Display symbols ......................... 7

Getting started ........................... 9

Inserting the SIM card/battery .... 9

Charging the battery .............. 10

Changing CLIPIt™ covers ........ 11

Switching phone on and off/

entering PIN ............................. 12

Enter PIN ............................... 12

Emergency number (SOS) ...... 12

General instructions ................ 13

Standby mode ....................... 13

Signal strength ...................... 13

Digital Rights Mgmt. (DRM) .... 13

Main menu ............................ 13

Standard functions .................. 15

Highlighting mode ................. 16

Menu speed dialling ............... 16

Security .................................... 17

Codes .................................... 17

Preventing accidental

activation ............................... 18

Text entry ................................. 19

My phone ................................. 23

Calling ...................................... 24

Default book ............................ 30

Addressbook ............................ 31

New entry .............................. 31

Change entry ......................... 33

Dialling an entry .................... 33

Groups ................................... 34

Phonebook ...............................35

New entry ..............................3 5

Call (search for an entry) ........3 6

Change entry .........................3 6

<Special books> .....................3 7

Call records ...............................38

Durat/charges ...........................39

Camera .....................................4 0

Ph oto mode ...........................4 0

Video mode ............................41

Inbox ........................................4 2

In-

end

SMS ...........................................4 3

Write/send ..............................4 3

Read .......................................45

Setting ...................................47

MMS .........................................4 9

Create ...................................4 9

Templates ..............................5 1

Sending an MMS ....................5 2

Receiving an MMS ..................5 3

Reading an MMS ....................54

Setting ...................................5 5

E-mail ........................................5 7

Write ......................................5 7

Receive/read ...........................58

Setting ...................................59

Voice message/mailbox ............60

Inst. message ...........................61

Start menu .............................61

Contact lists ...........................62

Starting to Inst. Message ........65

Msg. history ...........................66

Setting ...................................66

See also Index at the end of this User Guide

Table of Contents

CB services ............................... 68

Extras ......................................1 04

SIM services (optional) .........1 04

Alarm clock ..........................104

Sound recorder .....................105

Calculator .............................1 06

Unit converter ......................1 06

Stopwatch ............................1 07

Countdown ..........................1 08

Remote synchronisation .......1 08

Media player ...........................1 10

My stuff ..................................1 11

Mobile Phone Manager ..........1 13

Questions & Answers .............1 15

Customer Care ........................1 18

Care and maintenance ...........1 20

Product data ...........................121

Accessories .............................122

Battery quality statement ......1 24

Guarantee certificate (UK) .....125

Guarant ee certificate (IRL) .....1 26

Menu tree ...............................127

SAR – European Union

Surf & fun ................................. 69

Internet ................................ 69

Bookmarks ............................. 71

Games and Applications ......... 72

Downl. assis. .......................... 72

Setup ........................................ 74

Profiles .................................. 74

Themes .................................. 76

Display ................................... 77

Dynamic light ........................ 79

Ring tones ............................. 80

Call setup ............................... 82

Phone setup ........................... 84

Clock ..................................... 86

Connectivity .......................... 87

Security ................................. 90

Network ................................ 92

Accessories ............................ 94

My menu .................................. 95

Fast access key ......................... 96

Organiser ................................. 98

Calendar ................................ 98

Appointments ........................ 99

Tasks ................................... 100

Notes ................................... 101

Missed appts. ....................... 101

Dictating mac ...................... 102

Time zones .......................... 103

(RTTE) .....................................1 33

SAR – International

(ICNIRP) ..................................135

Index .......................................136

See also Index at the end of this User Guide

Safety precautions

Information for parents

Please read the operating instructions and safety precautions carefully before use.

Explain the content to your children and the hazards associated with using the phone.

Remember to comply with legal

requirements and local restric-

tions when using the phone. For

example in aeroplanes, petrol

stations, hospitals or while driv-

ing.

Only use original Siemens bat-

teries (100 % mercury-free) and

charging devices. Otherwise

you risk serious damage to

health and property. The battery

could explode, for instance.

Mobile phones can interfere

with the functioning of medical

devices such as hearing aids or

pacemakers. Keep at least

20 cm/9 inches between phone

and pacemaker. When using

the mobile phone hold it to the

ear which is further away from

the pacemaker. For more infor-

mation consult your doctor.

The SIM card may be removed.

Caution! Explain the content

and the hazards asociated with

using the phone to your chil-

dren.

The mains voltage specified on

the power supply unit (Volt)

must not be exceeded. Other-

wise the charging device may

be destroyed.

The ring tone (p. 80), info tones

(p. 84) and handsfree talking

are reproduced through the

loudspeaker. Do not hold the

phone to your ear when it rings

or when you have switched on

the handsfree function (p. 26).

Otherwise you risk serious per-

manent damage to your hear-

ing.

You may only open the phone

to replace the battery, face-

plate, keypad or SIM card. You

must not open the battery under

any circumstances. All other

changes to this device are

strictly prohibited and will invali-

date the operating licence.

Do not use an optical magnifier

to look at the activated infrared

interface [Class 1 LED product

(classification as per

IEC 60825-1)].

Safety precautions

Important

Please dispose of unwanted

batteries and phones as permit-

ted by the laws in your country.

The phone may cause interfer-

ence in the vicinity of TV sets,

radios and PCs.

Use only Siemens original

accessories. This will avoid

potential risks to health or prop-

erty and ensure compliance

with all relevant regulations.

Improper use will invalidate the guarantee!

These safety instructions also apply to Sie-

mens original accessories.

Telephone list (schematic)

A Call key

Dial phone number/name displayed/

highlighted, take calls. Show last phone

numbers dialled in standby mode.

On/Off/End key

• Switched off: Press and hold to

switch on.

£ X

• During a conversation or in an appli-

cation: press briefly to finish.

• In menus: Press briefly to go back a

level. Hold

down to go back to standby mode.

• In standby mode: hold down to switch

off phone.

Service provider

01.05.2004 10:10

NewMMS Menu

Joystick

Press the joystick down verti-

cally to start an application or

function.

In standby mode:

Open main menu.

Open user profiles.

Open phonebook/addressbook.

Soft keys

Inbox open

The current functions of this key are

shown in the bottom line of the display

as §Text§/symbol (e.g.

Start the camera.

^InI^{lists, messages and menus:}

5 Additional key for WAP access

Scroll up and down.

(if required, and no other default setting

is made).

Back one level.

During a call:

Set volume.

Call options.

Telephone list (schematic)

1 Integrated antenna

Do not obstruct the phone above the

battery cover unnecessarily. This

reduces the signal quality.

LED for Dynamic Light (p. 79)

3 Loudspeaker

£ X

4 Display

Service provider

5 Infrared interface (IrDA)

6 Input keys

7 * Ringtone

01.05.2004 10:10

NewMMS Menu

• Press and hold in standby mode:

Switch all audible signals on/off

(except alarm).

• Hold down on incoming call:

Switch off ringtone for this call only.

Key lock

Press and hold in standby mode:

Switch key lock on/off.

9 Connection socket

For charger, headset, flash, etc.

: Connection for external antenna

Camera lens

Mirror (depending on telephone

model)

Display symbols

Display symbols (selection)

Keypad locked

Signal strength

Auto answer feature on

Text input with T9

Activated and available

T9Abc

Charging

Battery charge level,

e.g. 50 %

Registered

Phonebook

Temporarily interrupted

Browser Offline

Records

Surf & fun

Service supplier portal

Browser online

Organiser

Browser via GPRS online

Browser no network

IrDA activated

Messages

Camera

Extras

IrDA transmission

File management

Events (selection)

Settings

SIM memory full

All calls are diverted

SIM memory full

Phone memory full

No network access

Missed call

Ringing tone off

Short ring (beep) only

Ringer only if the caller is

stored in the Phonebook.

Alarm set

Memory assistant

Display symbols

Message symbols (selection)

Camera symbols

Switches between photo

Unread

and video

Read

Brightness

Draft

Zoom factor

Sent

White balance

Flash connected

MMS not sent

MMS received

MMS read

MMS with DRM contents

(p. 13)

E-mail forwarded

{

E-mail with attachment

Voice mail received

Getting started

Inserting the SIM card/

battery

The service provider supplies you

with a SIM card on which all the

important data for your line is

stored. If the SIM card has been

delivered in credit-card size, snap the

smaller segment out and remove

any rough edges.

• Insert the battery sideways into

^{the phone}4, then press it down-

^wards5until it engages.

^{Press the grooved area}1, then push

cover towards the front in the direc-

^{tion indicated by the arrow}2.

• To remove, press the retaining tab

on the side of the battery, then lift

the battery out.

• Place the cover in position and

^{push it towards the front}6until

it latches into place.

• Place the SIM card in front of the

slot with the contact surface fac-

ing downwards. Then press the SIM

^{card slightly to push it in}3

(ensure that the chamfered corner

is in the correct position).

Getting started

Operating time

Additional information

Please switch off your phone before

removing the battery!

Only 3 V SIM cards are supported. Please

contact your service provider if you have an

older card.

The operating time depends upon

the respective conditions of use.

Extreme temperatures considerably

reduce the phone’s standby time.

Avoid placing the phone in the sun

or on a heater.

Call time: 100 to 330 minutes

Stand-by time: 60 to 300 hours.

Charging the battery

Charge icon not visible

The battery is not fully charged when

delivered. Plug charger cable into the

bottom of the phone, plug power

supply unit into a mains power socket

and charge for at least two hours.

If the battery has been discharged

fully, the charge icon is not immedi-

ately visible when the power supply

is plugged in. It will appear after up

to two hours. In this case the battery

is fully charged after 3 to 4 hours.

Only use the plug-in power supply

included in delivery!

Display while in service

Charge level display during opera-

tion (empty–full):

Display during charging.

Charging time

V W X

A beep sounds when the battery is

nearly empty. The charge level of the

battery is only displayed correctly

after an uninterrupted charging/dis-

charging cycle. You should therefore

not remove the battery unnecessarily

and where possible not finish the

charging process prematurely.

An empty battery is fully charged

after about 2 hours. Charging is only

possible within a temperature range

of +5 °C to 45 °C. If the temperature

rises/falls 5 °C above/below this, the

charge symbol flashes a warning.

The mains voltage specified on the

power supply unit must not be

exceeded.

Getting started

Assembling the phone

Additional information

The power supply unit heats up when used

for long periods. This is normal and not

dangerous.

If the battery is removed for longer than

30 seconds, the clock must be reset.

Remove the old keypad mat and

^{insert the new keypad mat}3into

the faceplate. Take care that it is cor-

rectly positioned.

Changing CLIPIt™

covers

You can use CLIPIt™ covers (accesso-

ries) to adjust the appearance of

your phone according to your per-

sonal taste.

Please switch the phone off before

changing the keypad mat or face-

plate.

Insert the phone into the bottom of

the faceplate

and then push it in

carefully until it clicks into position

Dismantling the phone

Remove battery cover (see p. 9). To

remove the faceplate, insert the lug

on the battery cover into the open-

ing and open the lock by simultane-

^{ously applying slight pressure}1and

^{turning the lug}2.

CLIPit™ Covers

The new keypad has an additional key

beneath the joystick to permit direct access

to the Internet information from the service

provider.

Switching phone on and off/entering PIN

Switching phone on and Switching on your phone

off

for the first time

Hold down the On/Off/End

Time/date

key.

During commissioning, set the clock

so that it displays the correct time.

You will not have to make this set-

ting again.

Enter PIN

The SIM card can be protected with

a 4 to 8-digit PIN.

Press this key, then select

Enter the PIN using the

number keys. The charac-

§Change§.

First enter the date (day/

month/year), then the

time (24 hours, including

seconds).

ters

appear to

****

ensure nobody can read

your PIN on the display.

Correction with ] .

Press this key. The time

and date are updated.

Confirm by pressing the

joystick. Logging on to

the network will take a

few seconds.

Time zones

Set the time zone for your area.

Select the city in the

Additional information

Change PIN.......................................p. 17

Clear SIM card barring ......................p. 18

desired time zone from

the list ...

§Set§

... and specify this firmly.

Copying SIM addresses

The first time the SIM card is

inserted, the entries on it can be cop-

ied to the Addressbook. Please do not

interrupt this procedure. During this

time, do not accept incoming calls . Fol-

low the instructions in the display.

Emergency number

(SOS)

Only to be used in real emergencies!

By pressing the soft key §SOS§ you can

make an emergency call on any net-

work without a SIM card and without

entering a PIN (not available in all

countries).

You can also copy data from the SIM

card at a later time (p. 36).

General instructions

Standby mode

Main menu

The phone is in standby mode and is

ready for use when the name of the

service provider appears on the dis-

play.

The main menu is displayed graphi-

cally with symbols:

Call up from standby

mode.

Hold down the On/Off/End

Select the application

key to return to standby

symbols.

mode from any situation.

Start an application.

Signal strength

Main menu options

Strong receive signal.

[

§Options§

Open menu.

A weak signal reduces the

Different functions are available

depending on the context:

call quality and may lead

to loss of the connection.

Change your location.

Big letters

Illumination

Help

Selection between two

font sizes.

Digital Rights Mgmt.

(DRM)

Set display light brighter/

darker.

Display of a help text.

Remember that you telephone has

digital rights management. The use

of downloaded pictures, sounds or

appliations can be restricted by the

suppliers, e.g. copy protection, use

for a limited period of time only,

number of times it can be used etc.

(see also p. 73).

General instructions

Symbols

The following symbols are used to

explain operation:

User guide

Menu controls

The steps needed to reach a function

are shown in a condensed form in the

user guide, e. g. to display call list for

missed calls in condensed form:

Enter numbers or letters.

On/Off/End key.

C ¢ ¢Calls missed

Call key

< >

This comprises the following steps:

Open the main menu.

Soft keys

Select , then function

Displays a soft-key func-

tion.

§Menu§

Calls missed.

Confirm.

Press the joystick vertically,

e.g., to call up the menu.

D F E

Press the joystick in the

direction indicated.

Function dependent on

service provider, may

require special registration.

Standard functions

Option menus

Text input T9 preferred: Activate/

(p. 19)

deactivate T9 input.

Functions which appear repeatedly

in the options menu are listed here.

Input language: Select

language for text.

§Options§ Open menu.

Rename

Capacity

Attributes

Rename selected entry.

Display memory capacity.

Edit

Open the entry to edit.

Display entry.

View

Display properties of the

highlighted object.

Delete/

Delete all

Delete entry/delete all

entries after confirmation.

Help

Display help text.

New entry

Send...

Create new entry.

Selecttransmissionservice

and medium for sending or

printing.

Reply/

Reply to all

The sender becomes the

recipient, "Re." is placed in

front of the subject matter

and the received text is

transferred into the new

message.

Save

Store entry.

Save to 9

Save recipients in the cur-

rent address directory.

Sort

Set sort criteria (alphabeti-

cal, type, time).

Standard functions

Highlighting mode

With some applications (e.g. Phone-

book/Addressbook) one or more

entries in a list can be highlighted to

carry out a function jointly.

Menu speed dialling

All menu functions are numbered

internally. A function may be

selected directly by entering these

numbers in sequence.

§Options§

E.g., write new SMS (from standby

mode):

Open menu.

Activate highlighting

mode.

Mark

Press this key to display

the main menu.

If a non-highlighted entry is selected,

this can be highlighted:

Press this key for

Messages.

§Mark§

The current entry is high-

lighted.

Press this key to

Write message.

If a highlighted entry is selected, the

highlighting can be deleted:

§Unmark§ Dehighlight the current

Press this key for SMS.

entry.

Additional highlighting functions:

Mark all

Highlight all entries.

Unmark all

Delete highlighting on all

marked entries.

Delete

marked

All selected entries are

deleted.

Security

The phone and SIM card are pro-

tected against misuse by several

security codes.

C ¢_¢T_Sel¢_ectSe_fucu_nr_cit_ty_io¢_n.Codes

PIN control

Keep these confidential numbers in a

safe place where you can access them

again if required.

The PIN is usually requested each

time the phone is switched on. You

can deactivate this feature but you

risk unauthorised use of the phone.

Some service providers do not per-

mit deactivation of the controls.

Codes

Protects your SIM card (per-

sonal identification number).

§Select§

Press this key.

PIN2

This is needed to set the charge

detail display and to access

additional functions on special

SIM cards.

Enter PIN.

Confirm input.

§Change§ Press this key.

Confirm.

PUK

PUK2

Key code. Used to unlock SIM

cards after the wrong PIN has

been entered repeatedly.

Change PIN

You can change the PIN to any

4 to 8-digit number you find easier

to remember.

Phone

code

Protects your phone. Must be

entered at the first security set-

ting.

Enter current PIN.

Press this key.

_J_,C

Enter new PIN.

Re-enter new PIN.

Security

C ¢_¢T_Sel¢_ecS_te_fucu_nr_cit_ty_io¢_n.Codes

Change PIN2

(Display only if PIN 2 is available).

Proceed as with Change PIN.

Preventing accidental

activation

Even if PIN use is deactivated (p. 17)

confirmation is required to switch on

the phone.

This prevents accidental activation

of the phone, e.g. when you are

carrying it in a bag or when you are

travelling in an aircraft.

Chg.phonecode

(Change phone code)

You define the phone code (4–8 dig-

its) when you call up a phone-code

protected function for the first time

(e.g. Direct call, p. 28). It is then valid

for all phone-code protected func-

tions.

Following the third unsuccessful

attempt, access to the phone code

and the functions that use it is

denied. Contact the Siemens Service

(p. 118).

Press down.

Press. The phone switches

on.

§Cancel§

Press or take no action.

The phone does not

switch on.

Clearing SIM card barring

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter

the PUK (MASTER PIN) provided by

your service provider with the SIM

card in accordance with the instruc-

tions. If the PUK (MASTER PIN) has

been lost, please contact your serv-

ice provider.

Text entry

Press briefly: Special char-

Text entry without T9

acters are shown.

Press number key repeatedly until

the required letter appears. After a

brief interval the cursor will advance.

Example:

Hold down: Open input

menu.

Press once/repeatedly:

. , ? ! ’ " 0 + - ( ) @ / : _

Hold down: Writes 0.

Press once briefly to type

the letter a, twice to type

b etc.

Writes blank. Press twice

= jumps a line.

Hold down to write the

number.

Ä, ä, 1–9 Umlauts and numbers are

displayed after the rele-

vant letters.

Special characters

Press briefly. The symbols

chart is displayed

Press briefly to delete the

letter before the cursor,

hold down to erase the

whole word.

]

)

’

;

(

)

[

]

{

}

€

Move the cursor

(forwards/back).

∆

Ω

Press briefly: Swap

between abc, Abc, abc,

Abc, ABC, 123. Status

1) Line break

shown in top line of dis-

play.

Navigate to characters.

Confirm.

Hold down: All input-

variants are displayed.

§Select§

Text entry

Writing with T9

Since the display changes as you pro-

ceed,

Input menu

With text input:

Press down: The input

it is best if you finish a word without look-

ing at the display.

Simply press the keys once only

where the relevant letter is located.

For "hotel", for example:

menu is displayed:

Text format (SMS only)

Input language

Mark

Copy/Insert

Press briefly for ^T9Abc then

Text entry with T9

4 6 8 3 5

A blank ends a word.

Do not use special characters such as

Ä but rather use the standard charac-

ters, e.g. A; T9 will do the rest for

you.

"T9" deduces the correct word from

the individual key entries by making

comparisons with an extensive dic-

tionary.

Activate, deactivate T9

§Options§ Open text menu.

Text input Select.

T9 Text Input is licensed under one or more of

the following:

U.S. Pat. Nos. 5,818,437, 5,953,541,

5,187,480, 5,945 928 and 6,011,554;

Canadian Pat. No. 1,331,057;

T9 preferred

Select.

United Kingdom Pat. No. 2238414B;

Hong Kong Standard Pat. No. HK0940329;

Republic of Singapore Pat. No. 51383;

Euro.Pat. No. 0 842 463 (96927260.8)

DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;

and additional patents are pending worldwide.

§Change§ Activate T9.

Select input language

Select the language in which you

want to compose your message.

§Options§ Open text menu.

Text input Select.

Input language

Select.

§Select§

Confirm,thenewlanguage

is set. Languages with T9

support are marked with

the T9 symbol.

Text entry

T9 word suggestions

Correct a word

If several options are found in the

dictionary for a key sequence (a

word), the most probable is dis-

played first. If the word you want has

not been recognised, the next sug-

gestion from T9 may be correct.

Move left or right, word

by word, until the

required word is

§highlighted§.

Scroll through the T9

word suggestions again.

The word must §highlighted§ be dis-

played. Then press

]

Deletes the character to

the left of the cursor and

displays a new possible

word!

again. The displayed word

is replaced with a differ-

ent word. If this word is

also incorrect, press

Additional information

Within a "T9-word", individual letters may

not be edited without first removing the

T9-status. In most cases it is better to

rewrite the complete word.

again. press until the cor-

rect word is displayed.

If the word you want is not in the dic-

tionary, it can also be written with-

out T9.

Set a full stop. The word is

concluded if it is followed by

a space. Within a word, a full

stop represents an apostro-

phe or hyphen:

To add a word to the dictionary:

§Spell§

Select.

e.g. §provider.s§ = provider’s.

The last suggestion is deleted and

the word may now be entered with-

out T9 support. Press §Save§ to add it

automatically to the dictionary.

Moving the cursor to the right

ends the word.

Press briefly: Switch

between: abc, Abc, ^T9abc,

^T9Abc, 123. Status shown in

top line of display.

Hold down: All input modes

are displayed.

Press briefly: Select special

characters (p. 19).

Hold down: Open input menu

(p. 20).

Text entry

Use text modules

Text modules

Text modules can be stored in the

phone for adding to your messages

(SMS, MMS, e-mail).

Write message

(SMS, MMS, e-mail).

§Options§ Open text menu.

Write text modules

§Insert§

Select.

C ¢M ¢Text modules

§Options§ Select New text.

Select Text modules.

Select text module from

the list.

Write text module.

§Select§

Confirm. The text module

is displayed.

§Options§ Open menu and select

Save. Accept the specified

name or allocate a new

one.

Confirm. The text module

is inserted in the message

to the right of the cursor.

Save.

My phone

Adjust your phone according to your

own wishes in the following ways to

give it a personal touch:

Where do I get what?

You can purchase additional ring-

tones, logos, animations and Java

applications from your service pro-

vider or directly from Siemens.

Ringtones (p. 80)

Assign individual ringtones to caller

groups or special dates

Service supplier portal

Pictures (p. 111)

Depending on your service provider,

you will find direct access to his por-

tal on your telephone via menu

items or bookmarks. Please contact

your service provider for more infor-

mation on these services.

Assign individual pictures or photos

to your Addressbook entries.

Animations (p. 78)

Choose a start-up and closing anima-

tion as well as a personal greeting.

Screensaver (p. 77)

Choose an analogue or digital clock,

or a personal picture.

Siemens Mobile Portal

You will find additional ringtones,

logos, animations and screensavers

as well as more application, games

and services in the Internet at this

address:

(Operator) Logo (p. 77)

Choose an individual picture (to be

displayed in standby mode)

www.siemens-mobile.com

Wallpaper (p. 77)

Or you can download them directly

via WAP:

Choose your own permanent back-

ground image.

wap.siemens-mobile.com

Colour scheme (p. 77)

You will also find a service for saving

data here as well as a list of the coun-

tries in which these services are

available.

Select a colour scheme for the user

interface.

Applications (p. 72)

Download your own applications

from the Internet.

My menu

Create your own menu with fre-

quently (p. 95) used functions,

phone numbers or WAP pages.

Calling

Dialling with number

keys

Set volume

Regulate the volume

(only possible during a

call).

The phone must be switched on

(standby mode).

If a Car Kit is used, its volume setting

will not affect the usual setting on

the phone.

Enter the number (always

with prefix/international

dialling code).

]

A short press clears

Redial previous numbers

the last digit, a long press

clears the entire phone

number.

To redial the phone number last

called:

Press the Call key. The dis-

played phone number is

dialled.

Press the Call key twice.

To redial other numbers that were

dialled previously:

End call

Press the Call key once.

Press the End key briefly.

Press this key even if the

person on the other end

of the line has hung up

first.

Pick out the phone

number from the list.

Press this key to select the

phone number.

Calling

Reminder

If the number is busy

§Prompt§ A beep reminds you to

redial the displayed

phone number after

15 minutes.

If the called number is busy or can-

not be reached because of network

problems several options are availa-

ble (depending on the service pro-

vider). An incoming call or any other

use of the phone interrupts these

functions.

Additional information

Store phone number in the

Addressbook/Phonebook.

Either

§Handsfr.§Handsfree switch

on (playback from loud-

speaker).

Auto redial

Always switch off "handsfree

talking" before holding the

phone to your ear! Otherwise,

you will damage your hearing!

Press and hold to switch

microphone off.

§Auto dial§ The phone number is

automatically dialled ten

times at increasing time

intervals. End with:

B End key.

International dialling codes

Press and hold until a "+" is

displayed.

Call back

§Call back§ Your phone rings when

the busy number is free.

Press the Call key to dial

the number.

§Country§ Press and select country.

Phone number memo

You can enter a phone number during the

call. The person to whom you are speaking

can hear these entries. When the connec-

tion has ended you can save or dial the

phone number.

Calling

Accept call

The phone must be switched on. An

incoming call will interrupt any other

use of the phone.

Handsfree

You can put the phone aside during

a call. You can then hear the caller

via the loudspeaker.

Press.

§Handsfr.§ Activate handsfree talk-

ing.

Press.

Switch on.

A phone number and the name of

the caller transmitted by the net-

work will be displayed if the number

is saved in the Phonebook/Address-

book. A picture of the caller may also

be displayed (p. 32).

Use the joystick to adjust

the volume.

§Handsfr.§ Deactivate.

Warning!

Always switch off "handsfree talking"

before holding the phone to your ear! Oth-

erwise, you will damage your hearing!

Reject call

§Reject§

Press.

Swapping between 2 calls

Press briefly.

Warning!

Establish a second connection

You can call another number during

a call.

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

§Options§ Open call menu.

Hold

The current call is put on

hold.

Additional information

Now dial the new phone

number or

Press and hold to switch off

the ringing tone and vibration.

Missed call display.

§Options§, select the Phone-

book, Addressbook, or

phone number.

When the new connection is estab-

lished:

§Swap§

Swapping between calls.

Calling

Incoming calls during a call

Conference

You may need to register for this serv-

ice with your service provider and set

your phone accordingly (p. 82). Dur-

ing a call, you may be advised that

there is another call waiting. You will

hear a special tone during the call.

You have the following options:

Call up to 5 parties one by one and

link them together in a multiparty

call. Some of the functions described

may not be supported by your serv-

ice provider or may have to be ena-

bled specially.

A connection has already been

established:

• Accept the waiting call in addition

to the first

§Options§ Open menu and select

Hold. The current connec-

tion is maintained.

§Swap§

Accept the waiting call,

putting the current call on

hold to do so.

Now dial a new number.

Always proceed as above to swap

between the two calls.

When the new connec-

tion is established ...

• Reject the waiting call

§Options§ … open menu and select

Conference. The held call is

joined.

§Reject§

Press.

Repeat procedure until all partici-

pants are linked together (up to

5 participants).

§Divert§

The waiting call is divert-

ed, for example, to the

mailbox.

•

Accept the waiting call and end the

current call

End

All calls in the multiparty

End the current call.

conversation are ended

when the End key is

pressed.

Accept new call.

Ending call(s)

Press the End key.

After the Return to held call? display,

you have the following selection:

§Yes§

§No§

You accept the call on

hold.

You end the 2nd call.

Calling

Call options

The following functions are only

available during a call:

Direct call

If this is active, only one number can

be dialled.

§Options§ Open menu.

Switch on

Hold

Maintain current call.

C ¢_¢DT_ire¢_ctS_ce_ac_llurity

Microphone

If switched off, the person

on the other end of the line

cannot hear you (muting).

Confirm selection.

Enter phone code.

Also:

Hold down

Handsfree

Volume

Call via the loudspeaker.

Adjust handset volume.

Phonebook/Addressbook.

(p. 27)

When first prompted you define and

enter the phone code (4–8 digits).

Default book

Conference

Time/charge

Confirm selection.

Please do not forget this code (p. 17)!

Display duration of call up

to now and (if set) the

charges incurred while the

call is in progress.

Select phone number

from the Phonebook/

Addressbook or enter it.

Confirm.

Send DTMF

Enter tone sequences

(numbers) for remote

inquiries to an answering

machine.

Apply

To dial the phone number

(e.g. Carol’s phone num-

ber), press and hold the

right display key.

§Carola§

Call

transfer=

Connect current call to a

second call. For you, both

calls are now ended.

Switch off

Main menu

Call status

Access to the main menu.

Press down:

List all held and active calls

(e.g. participants in a con-

ference).

Enter phone code.

Confirm input.

Calling

Using the Phonebook/

Addressbook

Store phone numbers and control

codes (DTMF codes) in the Phone-

book/Addressbook in the same way

as a normal entry.

Tone sequences (DTMF)

You can, for example, enter control

codes (numbers) for remote access

to an automatic answering machine

while another connection exists. These

entries are transmitted directly as

DTMFcodes (control codes).

Enter phone number.

§Options§ Open menu.

Press until a "+" appears in

Send DTMF

the display (wait for the

Select.

connection to be estab-

lished).

Enter DTMF codes

(numbers).

If necessary, wait again

for three seconds at a

time for the receiver to

process the entries safely.

Enter a name.

§Save§

Store entry.

You may also store just the DTMF

codes (numbers) and then send

them during the call.

Default book

C ¢L ¢Select function.

Phonebook

The Phonebook is located on the SIM

card. Only one phone number can be

entered per entry. The Phonebook

on the SIM card can easily be trans-

ferred into a different telephone.

Show entries

The entries in the standard directory

(Addressbook or Phonebook) are

shown.

Select a name with the

first letter and/or scroll.

^JI

Business card

Create your own business card to

sent to a different GSM-phone. If no

business card has been created yet,

you will be asked for your input.

New entry

Create new entry.

Phonebook (see also p. 35)

Addressbook (see also p. 31)

Move from field to field to

enter your details.

§Save§

Press.

Default book

You can set a particulary directory as

your preferred one to use.

Additional information

The content of the business card corre-

sponds to international standards (vCard).

The selected standard book is

opened in standby mode with the

joystick.

Copy numbers from Address-

book/Phonebook.

Open Phonebook or

Addressbook

Groups

See p. 34.

Addressbook

See p. 37.

In the Addressbook, a lot of data can

be recorded for each entry and addi-

tional functions such as pictures,

birthdays, chat can be used.

Addressbook

The Addressbook can store up to

1000 entries, each with a variety of

telephone and fax numbers as well as

additional address details. These

entries are managed separately from

those in the Phonebook in the phone

memory. However, you can exchange

data between the Addressbook and

the Phonebook on the SIM card.

Possible input fields

Last name:

URL:

First name:

Inst. message >>

Group:

Phone number:

Phone no./office: Company:

Phone no./mobile: Address: >>

Fax:

Birthday: >>

Picture:

Fax 2:

New entry

The address book is set as standard:

E-mail address:

E-mail 2:

All fields

Open Addressbook

(in standby mode)

Additional information

Group: Allocation to a group

(p. 34).

Display input fields.

Select requiredinput

fields.

Address: Extension to enter the

complete address:

Fill in input fields. The

maximum number of

characters available is

shown at the top of the

display.

Street:, Post code:, City:,

Country:

Com. services

Information if the entry is

being used as a chat con-

tact (p. 61):

At least one name must

be entered. Always enter

phone number with pre-

fix.

Nickname:, WV user ID:,

ICQ number:,

AIM screen name:

Addressbook

Birthday: After activation, the date

Display/find entry

of birth is entered.

Open Addressbook

Reminder: The telephone

reminds you one day

before the birthday at the

time entered.

(in standby mode).

Select required entry.

Display.

Picture:

Assign a picture to the

entry. It is displayed if you

are called by the corre-

sponding phone number.

Display options

§Options§ The options menu only

ever offers the functions

for the currently selected

input field.

All fields/Reduced fields

Display of number of

input fields.

§Save§

Save the entry.

Move to ...

Allocate current or high-

lighted entries to a group.

View

Display an allocated pic-

ture.

Additional information

Temporary switch to Phone-

book.

Copy to SIM

Copies name and one

phone number to the SIM

card (Phonebook).

Synchronisation

With the mobile phone manager, (p. 113)

you can synchronise your Addressbook

with Outlook® and other Siemens tele-

phones.

Using Remote sync. you can synchronise

your mobile with an organiser stored on the

Internet (see also p. 108).

New SMS,

New MMS,

New e-mail

Create a message with the

selected entry.

Browser

Start WAP browser and

visit URL.

Inst. mes-

sage

Begin chat p. 61.

(For standard functions see p. 15)

Addressbook

Change entry

Address book options

Open Addressbook

Depending on the actual situation,

different functions will be offered.

These functions can be applied to

the entry currently selected as well

as to multiple selected entries:

(in standby mode).

Select required entry.

Press.

§Edit§

§Options§ Open menu.

Select input field.

Open entry.

§Edit§

Move to ...

Allocate current or high-

lighted entries to a group.

Copy to SIM

Copies name and number

to the SIM card (Phone-

book).

Make changes.

Save.

§Save§

Filter

Only those entries which

match the filter criteria are

displayed.

Dialling an entry

Open Addressbook

Import

Sort

Set up readiness to receive

for a Phonebook entry via

IrDA (p. 87) or SMS (p. 43).

(in standby mode).

Select a name with the

first letter and/or scroll.

Specify sorting criteria for

output of the Addressbook

entries.

The number is dialled.

If there are several numbers in the

address book entry, these are

offered for selection.

Enter search term.

(For standard functions see p. 15)

Select phone number.

The number is dialled.

Addressbook

Ringing tone for group

Assign a ringtone to a group that

plays when one of its members calls

you.

Groups

Nine groups are specified in your

phone to enable you to arrange your

Addressbook entries clearly. You can

rename seven groups.

C ¢T¢Ring tones¢Group calls

Open Addressbook

(in standby mode).

Select group.

<Groups> Select (the number of

entries is listed behind the

group name).

Confirm. If a ringtone has

already been set, it will be

played. Otherwise, the

ringtone list will be dis-

played and you can select

one.

Select group.

Groups menu

§Options§

Open menu.

I _{If necessary, select a}

ringtone.

Rename

group

Change name of group.

Confirm.

Group

symbol

Assign a symbol to a group.

The symbol must then appear

in the display when one of the

group members calls.

Additional information

No group: Contains all Addressbook

entries that do not belong to a group (name

cannot be changed).

Received: Contains Addressbook entries

received by IrDA (p. 87) or SMS (p. 43)

(name cannot be changed).

Phonebook

Entries in the Phonebook (on the SIM

card) are managed separately from

those in the Addressbook. You can,

however, exchange data between

the Phonebook and the Address-

book.

Phone number:

Always enter phone number with

prefix. An entry is not saved without

a phone number.

Name:

Enter first and/or last names.

Group:

Default: No group

Important phone numbers are com-

bined together in a group (VIP).

New entry

If the Phonebook has been selected

as standard:

Open Addressbook

(in standby mode).

Location:

Default SIM

Special SIM cards can save phone

numbers in a protected area

(Protected SIM) (PIN2 required).

Select <New entry>.

Display input fields.

Select input field.

Record number:

Each entry is automatically assigned

a record number. You can also dial

using the record number.

Fill in input fields. The

maximum number of

characters available is

shown at the top of the

display.

§Save§

Press to store the new

entry.

Additional information

Temporary switch to Address-

book.

§Country§ International dialling code... p. 25

Funktionen zur Text entry..................p. 19

Phonebook

Call (search for an entry) Phonebook options

Open Phonebook.

The following functions are

available, depending on the current

situation.

Select a name with the

first letter and/or scroll.

§Options§

Open menu.

Number is dialled.

Copy into 9

Copy all highlighted

entries to the Address-

book.

Call using record no.

A record number is automatically

assigned to every new entry in

Phonebook.

Copy all to 9

Copy all entries to the

Addressbook.

Delete all

The entire Phonebook

is deleted. PIN-pro-

tected

Enter record number.

Press.

Import

Set up readiness to

receive for a Phone-

book entry via IrDA

(p. 87) or SMS (p. 43).

Press.

Change entry

(For standard functions see p. 15)

Select entry in Phone-

§Edit§

book.

Press and select Edit.

Select desired input field.

Make changes.

Press.

§Save§

Phonebook

There might be phone numbers

saved in your Phonebook that have

been provided by your service pro-

vider. They may be used to call local

or national information services or to

use services offered by your service

provider.

Open Addressbook

(in standby mode).

Select.

Enter "own" phone numbers in Phone-

book (e.g., fax) for information. These

numbers can be changed, deleted

and also sent as an SMS message.

Phone number extensions in the

Phonebook

Digits may be replaced by a "?" when

phone numbers are entered in the Phone-

book/Addressbook:

Display the phone numbers saved in

the VIP group.

Press down:

These wildcards must be replaced with

numbers before dialling (e.g., with the

extension numbers in a phone system).

Entries stored in the Phonebook on

the SIM card can also be used on

other GSM phones.

To make a call, select the phone number

from the Phonebook/Addressbook.

Press.

Replace "?" with numbers.

Number is dialled.

On special SIM cards, phone num-

bers can be stored in a protected

location. PIN2 is required for editing.

Call records

The phone number of a caller is dis-

played if

Calls missed

The phone numbers of calls that you

have received but not answered are

stored for call back purposes.

• the caller has switched off the

Incognito function and

Icon for missed call (in

• the network supports the "Caller

Identity" function.

standby mode). Press the

display key beneath the

symbol to call up the Inbox

(p. 42).

Alternatively, a caller’s name is dis-

played if it is stored in the Phone-

book / Addressbook.

Calls received

Accepted calls are listed.

Your phone stores the phone num-

bers of calls for convenient redial-

ling.

Calls dialled

C ¢

Access to the last numbers dialled by

you.

Select record.

Fast access in standby

mode.

Open call list.

Delete records

The records are deleted.

Select phone number.

Dial phone number.

Call list menu

The records menu can be called up if

an entry is highlighted.

§View§

Display information on

the phone number.

§Options§ Open menu.

Up to 500 entries are stored in

the records:

Copy into 9/

Copy to SIM

Copy the currently

selected phone number

into the preferred direc-

tory.

(For standard functions see p. 15)

Durat/charges

You can display the charges and

duration during a call. You can set

a unit limitation for outgoing calls.

Account limit

(PIN2 prompt)

Special SIM cards allow you or the

C ¢ ¢Durat/charges

service provider to define a credit or

a period after which the phone is

barred for outgoing calls.

Select

Last call

All outg. calls

All incoming

Remain. units

Charge sett.

§Edit§

Press.

Enter PIN2.

Account limit

Switch on.

Select.

Enter number of units.

Confirm.

§OK§

Open report or settings.

Reset the selected report.

§Reset§

Then confirm the credit or reset the

counter. The status display for pre-

paid cards may vary depending on

the service provider.

Charge sett.

Open menu.

Currency

Edit your currency.

Auto display

Call duration and charges are

automatically displayed.

Personal rate

(PIN 2 prompt)

Enter the currency as well as the

charge per unit and time.

Camera

You can view photos/videos

recorded on the integrated camera

immediately,

mode, the recording time already

used and the maximum recording

time still available is shown here.

• use the photo as a background

image, logo, a switch on/off

animation or a screensaver.

è Camera

Ù Û

• send the photo/video via MMS or

e-mail.

Switch on

C ¢

Premium

Options

Starts camere in standby

mode.

Switches between frame

and videorecording.

Photo mode

Takes a photo.

The current (preview) image is dis-

played. You will see the following in

the first line from left to right:

Displays the preview

image of the next photo.

The photo is saved with a name, the

date and the time. To enter the

name, see Setup in the options

menu.

Brightness

Zoom factor.

White balance.

Flash connected.

Settings prior to taking a photo:

Setting the brightness.

In the top right-hand corner of the

preview image, the number of pho-

tos which can still be taken in the

selected resolution is displayed. This

number varies considerably from

motif to motif (storage space

required). Beneath the preview

image, you will find a reference to

the selected resolution. In video

Sets the zoom factor.

Image resolution

A setting can be made for the quality

of the image regardless of the pre-

view image resolution.

Camera

Premium:

High:

Medium:

Wallpaper:

640 × 480 (VGA)

320 × 240 (QVGA)

160 × 120 (QQVGA)

132 × 176

Camera options

The following functions are availa-

ble, depending on the current situa-

tion.

§Options§ Open menu.

The resolution may decrease

depending on the selected digital

zoom.

Settings

• Name for recordings

• Image resolution.

• Colour mode: Normal,

sepia, grey tones.

Video mode

The video mode resolution is the

same as the preview image resolu-

tion.

Pictures

Displays list of photos.

Display the video list.

see also Add contact

memb.

Search for group member.

Enter welcome text.

Delete group

Delete group.

Invite

Invitation to the contacts

in your own group to Inst.

Message.

Delete

member

Delete contact from the

group member list.

Add group

Add new group.

Search group

Search for group on the

server (no longer in the

"administered groups"

list).

Inst. message

Creating a new contact list

The current contact list is displayed.

§Options§ Open menu.

Contact list options

§Options§ Open menu.

Details =

Additional information

about the contact or the

group.

Contact list

Available contact lists are

displayed.

My settings

Information on your cur-

rent personal status

(p. 67).

§Options§ Open menu.

Create

Select.

Manage

Functions for managing

a contact or a group.

Contact list ID:

Give the contact list its

own, specific name.

Contact list

Block list

Display contact lists for

selection.

Name:

Allocate self-explanatory

names.

Display all blocked con-

tacts. Can be unblocked.

Confirm.

Appl. settings

Suspend

Set the application

(p. 67).

Terminate the applica-

tion, the server remains

connected.

Logout

Help

Log off from the server

and return to start menu.

Display help text.

Inst. message

Options (individual contact)

§Options§ Open menu.

Start chat

A contact list must be displayed.

Select a contact or a

Send sound

Select and send a melody/

group.

tone from the list (DRM

p. 13).

Startcommunicationwith

the contact.

Send

picture =

Select and send a picture

from the list (DRM p. 13).

The page is displayed.

During Inst. Message with

a group, the name of the

sender is placed in front

of each contribution.

Send any

Details

Send any file.

Information about the con-

tact (if this is authorised by

him).

Open editor.

Write text

Clear all

Delete all texts in the cur-

rent Inst. Message.

Block

contact

Send text. The text

appears in the chat soon

afterwards.

No more messages are

received from the contact

and the contact receives

no status information from

you. This function works

for all your lists.

Naturally, you can also receive mes-

sages from contacts whom you do

not know. This will be pointed out to

you in the display, and you can

either switch to Inst. Message or

ignore/block the contact.

Inst. message

Options (group contact)

§Options§ Open menu.

Setting

C ¢_¢M_Selec¢_{t f}I_un_nst_c._tm_ioe_ns_.sage¢Setup

Account

The list of available accesses is

displayed.

Leave group

Details

Exit group.

Information about the

group:

Group ID:, Name:, Topic:,

Owner:

Select an access to estab-

lish a connection.

Clear all

Delete all texts in the cur-

rent Inst. Message.

<New entry>/Account sett.

Set up an access or

Receiving objects

You will be informed in the display if

sounds or pictures are sent to you

during a dialogue.

change the settings as

specified by the service

provider. Depending on

the service provider, the

settings may not be

changeable.

§Receive§ Accept object.

§Reject§

Reject object.

Name:

URL:

Name of the access.

Enter URL, e.g. http://

www.abc.com

Msg. history

C ¢M ¢Inst. message¢Msg.

User ID:

Enter a non-ambiguous

user (login) name.

history

The messages from the last meeting

are displayed. You can read and

delete the contributions.

Password:

Enter password (shown

as a series of asterisks).

Requirement: The server must be

disconnected, see Suspend (p. 64)

and Automatic login: (p. 67).

Inst. message

My settings

Appl. settings

Information on your current per-

sonal status:

Settings for the application used:

Automatic

Auto-reconnect to the

last access to be used.

Alias:

Your own alias by which

you can be found on the

server.

Timeout:

Time without action after

which the application is

terminated. However, the

server remains con-

nected.

AIM screen

name:

Name to be displayed in

the group.

Mood:

Information about your own

mood, e.g.

Message info:/

Online info:

Signal the receipt of mes-

sages: Yes/No

Happy, Sad, Sleepy, etc.

Signal given as:

• Sound

• Silent alert

• Pop-up

Popup windows

authorised: Yes/No

Status text:

Availability:

Random text information,

e.g. “Am at home”.

Availability:

Available, Not available,

Discreet

Mobile:

Enter the phone number

with internal extension

code.

§Options§ For each setting, specify

who is allowed to view

your personal informa-

tion:

Public

All contacts.

Private

Contacts designated as

Friend: (p. 62).

Hidden

Nobody.

CB services

C ¢M ¢Setup¢CB services

Topic

Select

Some service providers offer infor-

mation services (info channels, Cell

Broadcast). If reception is activated,

your Topic list will supply you with

messages on the activated topics.

§Options§ Open list menu.

If a topic is selected in the list you

can view it, activate/ deactivate it,

edit it or delete it.

CB languages

CB messages are displayed in

standby mode, longer messages are

scrolled automatically.

Receive Cell Broadcast messages in

only one specific language or in all

languages.

Receive CB

Displays

Ö,Õ

You can activate and deactivate the

CB service. If the CB service is acti-

vated, standby time for the phone

will be reduced.

Topic activated/deactivated.

New messages received on

the topic.

Topic list

Messages already read.

You can add any topics to this per-

sonal list from the topic index. You

can preset 10 entries with their

channel numbers (ID) and, if applica-

ble, with their names.

New topic Select.

• If no topic index is available, enter

a topic with its channel number

and confirm with §OK§.

• If the topic index has already been

transmitted, select a topic and

activate it with §Options§.

Surf & fun

Browser menu

§Options§ Open menu.

Surf & fun

Get the latest information from the

Internet that is specifically adapted

to the display options of your phone.

In addition, you can download

games and applications to your

phone. Internet access may require

registration with the service pro-

vider.

Homepage

Call up the pre-set

homepage for the current

profile.

Bookmarks

• List bookmarks Dis-

play list of bookmarks

stored in the phone.

• Bookmark site The

current page is saved

as a bookmark.

Access to the service

provider

Direct call-up of the browser with

the URL from your service provider.

Go to...

Enter URL for direct dial

to an Internet address,

e.g. wap.siemens-

mobile.com

Reload

Reload current page.

Internet

Show URL

Display the URL of the

page currently loaded for

sending via SMS/MME/

e-mail.

C ¢ ¢Internet

The browser is activated with the

pre-set option as soon as you call up

the function (Browser settings, S. 70;

may be specified/pre-assigned by

service provider).

History

Display last Internet sites

to be visited.

Disconnect

File

Disconnect the Internet.

Save object on the current

page or save the com-

plete page; display saved

pages.

Setup

Set or reset browser

(p. 70).

Exit browser

Close the browser.

Surf & fun

End connection

Browser settings

Press and hold to clear

down the connection and

close the browser.

C ¢ ¢Internet

§Options§ Open menu.

Setup

Select.

Navigation in the browser

Browser

Set start option as well as

• Select a link.

handling of pictures and

sounds plus send options.

• Settings, status on/off.

• Press briefly: back a page.

Profiles

The list of profiles is dis-

played for activation/setting.

For more information, con-

tact your service provider.

• One input field/link forward/back.

• Scroll one line.

Protocol

Set protocol parameters,

push messages and abort

time as well as handling of

cookies.

Display symbols in the browser

(selection)

parameters

Connect

No network

Security

Context

Set encryption.

Network

GPRS online

Reset session; delete

cache, history and cookies.

Enter special characters

Your Internet browser is licensed by:

* ^,0

Select important special

characters.

Surf & fun

Profiles

Bookmarks

Preparation of the phone for Internet

access depends on the service pro-

vider concerned:

C ¢ ¢Bookmarks

Display URL/call up page

List bookmarks

Profile pre-set

In most cases, access profiles have

already been created for one or more

service provider(s).

Display list of bookmarks

stored in the phone.

Select bookmark.

Call up URL.

Select profile.

Activate profile.

Save

Set profile manually

If necessary, contact your service

provider.

Bookmark site The current page is

saved in the phone as a

bookmark.

§Options§ Open menu.

Bookmark options

Edit

Start processing. For the

Internet-specific settings

below, pleasecontactyour

service provider.

§Options§ Open menu.

Here you will find functions for

changing and managing bookmarks

and their folders. This includes edit-

ing individual entries with the corre-

sponding URLs as well as deleting

and moving them to other folders.

Delete

Delete selected profile.

Download new

Games and Applications

Select a service provider

or URL.

Games and applications are offered

on the Internet. Once downloaded,

these are available to you via the

telephone. Most applications include

instructions. Some applications and

games are already pre-installed on

your telephone. You will find these

listed here:

Start WAP browser and

visit URL.

Only description file

The description file is

loaded for information

purposes only. The appli-

cation/game itself must

be loaded separately.

www.siemens-mobile.com/t9

Requirements

WAP profile (p. 71) and the access

(p. 88) must be configured.

or complete download

The application/game is

completely loaded.

Download

Select the correct access depending

on whether you are loading games

or applications:

Apply

Remember that applications/games

may be protected (DRM, p. 13).

The executable applica-

C ¢O¢Games

tion is saved on the tele-

phone and can be started

immediately .

C ¢O¢Applications

In addition to URLs and service pro-

viders for the download, any availa-

ble applications/games and folders

will be displayed.

Downl. assis.

C ¢O¢Downl. assis.

You will not be left on your own dur-

ing the download!

Additional information

You can use WAP to download applications (e.g.

ringtones, games, images, animations) from the

Internet. Downloading or running applications will

not affect or change the software already

The following key control is used for many

games (virtual joystick):

installed on your Java™-enabled mobile phone.

Siemens excludes all warranty and liability claims

in respect of or in connection with any applica-

tions subsequently installed by the customer and

any software not included in the original delivery

package. This also applies to functions enabled

subsequently at the customer's instigation. The

purchaser bears sole risk for the loss of, damage

to, and any defects arising in, this device or the

applications and for any direct damage or conse-

quential damage of whatever nature resulting

from the use of this application.

1 2 3

4 5 6

7 8

Games&More options

For technical reasons, such applications and sub-

sequent enabling of certain functions are lost in

the event of the device being replaced/re-sup-

plied and may be lost if it is repaired.

In such cases, the buyer is required to download

or release the application again. Please ensure

that your phone has Digital Rights Management

(DRM) so that individual applications downloaded

via WAP are protected from unauthorised repro-

duction. These applications are then exclusively

intended for your phone and cannot be trans-

ferred from this even to create a backup.

Processing and administering your

applications and folders:

Move

Move applications between

folders.

New folder

Reinstall

Create and name new

folder.

Reinstall an application

(update).

Siemens does not warranty, guarantee or accept

any liability for the customer's ability to download

or enable applications again or to do so free of

charge. If technically possible, secure your appli-

cations on the PC with the "mobile phone man-

ager" p. 113.

Security

Reinstall

Select a safety level.

Repeat after transmission

error.

Attributes

Show details of the applica-

tion/folder (name, version,

size, path, producer, date).

HTTP

profile

Display profile list for

activation/setting

(For standard functions see p. 15)

Setup

Profile settings

Edit a default profile or create a new

personal profile:

Profiles

C ¢T¢Profiles

Several settings can be stored in a

phone profile in order, for example,

to adapt the phone to the surround-

ing level of noise.

Select profile.

§Options§ Open menu.

Change sett.

• Five standard profiles are provided

with default settings. They can be

changed however:

Select.

The list of available functions is dis-

played.

Normal environment

Quiet environment

Noisy environment

Car Kit

When you have finished setting a

function, you return to the profile

menu where you can change a

further setting.

Headset

Additional information

• Calling up the list in standby mode:

• You can set two personal profiles

(<Name>).

Profile list is displayed.

• The special profile Aircraft mode is

fixed and cannot be changed.

• The active profile is marked with ·.

Switching on a profile

Select default profile or

personal profile.

Switch on profile.

Setup

Profile-Optionen

Aircraft mode

§Options§ Open menu.

All alarms (appointments, alarm

clock) are deactivated. This profile

cannot be modified.

Activate

Activate selected profile.

Change profile settings.

Change sett.

Copy from

Switch on

Scroll to Aircraft mode.

Copy settings from

another profile.

Confirm selection.

Rename

Change personal profile

(except default profiles).

Confirm safety inquiry

again in order to activate

the profile. The phone

switches itself off auto-

matically.

Car Kit

If an original Siemens Car Kit is used,

the profile is switched on automati-

cally as soon as the phone is inserted

into the cradle (see accessories also).

Normal mode

When you switch on your phone

again, the previously set profile will

be reactivated automatically.

Headset

The profile is only switched on auto-

matically if an original Siemens

headset is used (see accessories

also).

Themes

C ¢T¢Themes

Load a completely new user inter-

face in your telephone. With the

press of a key, various functions are

re-organised on a topic basis, e.g.

Switch on/off animation, back-

ground image, screensaver, switch

on/off melody, additional anima-

tions.

Topic files are compressed to save

memory space. After a download

(p. 72) or a call from My stuff, these

are automatically unzipped when

activated.

Activate new topic

Select topic.

Display topic preview.

Activate new topic.

Display

C _¢¢_ST_el¢_ectD_fis_up_nl_ca_ty_ion.

Wallpaper

Set wallpaper graphic for display.

Logo

Language

Choose graphic to be displayed

instead of the provider logo.

Set the language of the display text.

When "automatic" is set, the lan-

guage of your home service provider

is used.

Colour skin

Select colour scheme, incl. back-

ground image for the entire user

interface

If a language that you do not under-

stand happens to be set, the phone

can be reset to the language of your

home service provider with the fol-

lowing input (in standby mode):

Screensaver

The screensaver shows a picture in

the display when a period set by you

has elapsed. An incoming call and

pressing any key will end the func-

tion except if the safety function is

activated.

_{# 0 0 0 0 #}A

Text input

T9 preferred

Activate/deactivate intelligent text

entry.

Preview

Display the screensaver.

Input language

Style

Select language for text entry. Lan-

guages with T9 support are marked

with the T9 symbol.

Select Analogue clock, Digital clock,

Bitmap, Energy saving

Bitmap

Select image in the My stuff.

Timeout

Own greeting

Set period after which the screen-

saver starts.

Enter greeting to be displayed

instead of animation when phone is

switched on.

Security

To terminate the screensaver, the

telephone code is requested.

Big letters

You can choose between two font

sizes for the display.

Auto key lock

Automatic keypad locking if no key

has been pressed for one minute in

standby mode.

Illumination

Set display light brighter/darker. The

darker the setting the longer the

standby time.

Unlocking:

Press down.

Press the joystick repeat-

Note

edly at the top/bottom to

adjust up or down.

The Bitmap (animated) and Digital clock

screensavers reduce the stand-by time of

your telephone considerably.

Start up anim.

Select animation to be shown when

phone is switched on.

Shutdn anim.

Select animation to be shown when

phone is switched off.

Dynamic light

§Change§ Display the possible

rhythms.

¢T¢Dynamic light

C _{¢Select function.}

Select them from several

flash rhythms.

The LEDs beneath the top of the

phone are used to optically signal

various functions.

Allocate selection.

Play demo

All flash rhythms are displayed in

sequence.

Show effects

Switch on function.

§Cancel§

Terminate.

Select

You can set the optical signals for the

following functions:

Standby

Net search

d Calls

Group calls

Other calls

During a call

Incoming msgs

Appointments

CarKit conn.

Low battery

During on/off

Soundplayer

Ring tones

Volume

Set different volumes for types of

call/functions.

C _¢¢_ST_el¢_ectR_fi_ung_ncto_tin_oe_ns_.

Select

Set the tones on the telephone to

suit your requirements.

Incoming call

Messages

Alarm clock

Organiser

System

Ringer setting

On/off

Activate/deactivate all

tones.

Beep

Reduce ringtone to a

short signal (beep).

Applications

Silent alert

The ringtone is sounded

again.

To avoid the disturbance caused by a

ringing phone, you can activate the

silent alert function as an alterna-

tive. The silent alert can also be acti-

vated in addition to the ringtone

(e.g. in noisy environments). This

function is deactivated when the

battery is being loaded and accesso-

ries are connected (except the head-

set).

Set volume.

Confirm setting.

Additional information

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

Select one of several dif-

ferent silent alerts.

Allocating a ringtone

A ringtone which has already been

selected will be played or the list of

possible ringtones will be displayed

for selection.

d Calls

Allocate a single ringtone to all

phone numbers in the Addressbook.

Group calls

Allocate a different ringtone to each

group.

Other calls

Allocate one ringtone to the remain-

ing callers.

More melodies

Allocate further ringtones for:

Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

or record new ones with:

Sound recorder (p. 105)

Call setup

C _¢¢_ST_el¢_ectC_fa_ull_ns_ce_tt_iu_op_n.

Clear all

All set diversions are cleared.

Set up call divert (example)

Hide ID

The most common condition for call

divert is, for example:

When you make a call, your phone

number can be displayed on the

recipient's display (depending on the

service providers).

Unanswered

Select Unanswered.

(Includes the conditions

To suppress this display, you can

enable the "Hide ID" mode for all sub-

sequent calls or just for the next call.

You may need to register separately

with your service provider for these

functions.

Not reachable, No reply,

Busy, see below)

Set

Confirm.

Select.

Confirm.

Call waiting

If you are registered for this service,

you can check whether it is set and

you can activate/deactivate it.

Select or enter the phone

number to which the calls

are to be diverted.

§Mailbox§ Use existing mail-

box phonenumbers, or

enter them if necessary.

Divert

You can specify the conditions under

which calls should be diverted to

your mailbox or other numbers.

Confirm. After a short

pause, the setting is con-

firmed by the network.

Status check

All calls

All calls are diverted.

You can check the current divert sta-

tus for all conditions. After a short

pause, the current situation is trans-

mitted by the network and dis-

played.

Icon in the top line of the

display in standby mode.

Not reachable

Divert occurs if phone is switched off

or is out of range.

Condition set.

Not set.

Display if status is

unknown (e.g. with a new

SIM card).

No reply

Call screening

A call is only diverted after a delay

that is determined by the network.

The period can be set to a maximum

of 30 seconds in 5 second intervals.

Only calls from phone numbers that

are in the Phonebook/Addressbook

or in a group are signalled. Other

calls are only displayed.

Busy

Any key answ.

Incoming calls can be accepted by

pressing any key (except for B ).

Divert occurs if a call is in progress.

If Call waiting is activated (p. 25), you

will hear the call waiting tone during

a call.

Minute beep

Receiving fax

Fax calls are diverted to a number

with a fax connection.

During the call, you will hear a beep

after each minute as a reminder of

the time elapsed. The recipient does

not hear this beep.

Receiving data

Data calls are diverted to a phone

number with a PC connection.

Additional information

Note that the divert is stored in the network

and not in the phone (e.g., when the SIM

card is changed).

Reactivate divert

The last divert has been stored. Proceed

as with "Set divert". The stored phone

number is displayed. Confirm number.

Phone setup

C _¢¢T_Sel¢_ectP_fh_uo_nn_ce_ts_ioe_ntu_.p

Phone identity

The phone identity number (IMEI) is

displayed. This information may be

useful for customer service.

Key tones

Set the type of acoustic key

acknowledgement.

Alternatively enter in standby mode:

# 0 6 #

§Info§

Display further informa-

tion about the appliance.

Info tones

Set service and alarm tones:

Device check

After the last information page, a

self-test as well as individual test are

offered. If you select Selftest, all indi-

vidual test are carried out.

On/off

Activate/deactivate tones.

Extended If switched on, a wider

range of service tones is

available, e.g.: end of

Software version

Display the software version for your phone

in standby mode:

menu reached, network

connection interrupted.

# 0 6 #, then press §Info§.

Automatic switch off

The phone switches off each day at

the set time.

Memory assis.

Activate

§Time§

The memory assistant will help you if

there is insufficient phone memory.

If necessary, it is automatically

started by applications.

Press.

Enter time

(24-hour clock).

After the capacity has been checked,

all files and folders are displayed

with their size and you can view,

open or delete them as necessary.

Confirm.

Deactivate

§Manual§ Press.

Confirm.

File system

Master reset

Format

(Phone-code protected)

Reset phone to default values (fac-

tory setting). This does not affect the

SIM card or the network settings.

The telephone memory is formatted

and all saved data such as ringtones,

pictures, games, etc. is deleted.

Alternatively enter in standby mode:

# 9 9 9 9 #

Clean up

Creating more memory by deleting

temporary, non-requird files.

Clock

C _¢¢_ST_el¢_ectC_flo_uc_nk_ction.

Date format

Select the display format for the

date.

Time format

Time/date

Select 24h or 12h.

The clock must be set correctly once

at start-up.

Buddhist year

§Change§ Press.

Switch to the Buddhist year (not on

all phone models).

First enter the date (day/

month/year), then the

time (hours/minutes/

seconds).

Show clock

Activate/deactivate time display in

standby mode.

Additional information

If the battery is removed for longer than

30 seconds, the clock must be reset.

Auto time zone

The time setting is made automati-

cally in the GSM network.

Time zones

The time zone can be selected in the

world map or a city list:

World map

Select the desired time

zone.

City list

Select a city in the

selected time zone.

§Options§

Open menu.

Set

Set time zone.

Auto time

Have the time zone auto-

matically set by the net-

work.

zone

Search city

Help

Search for a city.

Operating instructions.

Connectivity

C _¢¢_ST_el¢_ectC_fo_un_nn_ce_tc_it_oiv_ni_.ty

GPRS info

Display of information on connec-

tion status.

IrDA

GPRS

Your phone has an infrared inter-

face. With this interface, you can

exchange data such as pictures, ring-

tones, Addressbook entries, busi-

ness cards or organiser data with

other appliances which also have an

infrared interface.

(General Packet Radio Service)

Switch GPRS on/off

GPRS is a new method for transmit-

ting data faster in the mobile net-

work. Use GPRS and if the network

has sufficient capacity, you can be

connected to the Internet perma-

nently. Only the actual transmission

time is charged by the network oper-

ator. Some service providers do not

yet support this service.

The infrared interface is on the right

side of the phone. The distance

between the two devices must not

exceed 30 cm. The infrared windows

in both appliances must be aligned

as accurately as possible with each

other.

Shown in the display

Shown on the display:

Activated and available.

IrDA activated.

Registered.

During transmission.

Temporarily interrupted.

Data services

HTTP profile

Basic setting and activation of the

connection profiles for data trans-

mission such as MMS, WAP.

The phone default setting varies

from service provider to service pro-

vider.

The phone default setting varies

from service provider to service pro-

vider.

• The settings have already been

implemented by the provider. You

can start immediately.

• The settings have already been

implemented by the provider. You

can start immediately.

• Access profiles have already been

created by your provider. Then

select and activate profile.

• Access profiles have already been

created by your provider. Then

select and activate profile.

• The access profiles must be con-

figured manually.

If necessary, check with your service

provider for details. You will find the

current settings for the service pro-

vider in the Internat at this address:

www.siemens-mobile.com/customercare

in the FAQ section.

• The access profiles must be con-

figured manually.

If necessary, check with your service

provider for details. You will find the

current settings for the service pro-

vider in the Internat at this address:

www.siemens-mobile.com/customercare

in the FAQ section.

Make the settings.

Select profile

Select the profile.

Confirm selection.

Set profile

Select the profile.

§Options§

Open menu.

§Edit§

Open the selection.

Select CSD settings, and/or

§Edit§

GPRS settings.

Make the settings as spec-

ified by your service pro-

vider.

Rec voice/fax

(Only if no special fax or data number

is available).

Start the required communication

program on your PC and select the

function on the phone during the call

(the PC will take over the connec-

tion).

Authentication

Activate or deactivate encrypted

WAP dial-up (CSD connections only).

Fax/data

Fax/data mode using a PC

With the phone and a connected PC,

you can transmit and receive faxes

and data. Appropriate software for

fax and data communication must

be available on your PC and there

must be a connection to the phone.

End transmission

End transmission with PC-software

and/or press

Rec fax/data

Fax and data services must be ena-

bled by the service provider. There

are variations in fax and data recep-

tion, depending on the network.

Please ask your service provider

about this.

Your service provider has given you a

number for telephoning and a

fax/data number.

The call is signalled by a special ring-

ing tone and the type of call (fax or

data) is displayed. Now start the

communication program in your PC

to receive the fax/data.

Send voice/fax

Set this function on the phone before

transmission so that you can switch

from voice mode to fax mode.

Security

C _¢¢_ST_el¢_ectS_fe_uc_nur_ci_tty_ion.

Only ‚

(PIN 2 or phone code protected)

Dialling options are restricted to SIM-

protected phone numbers in the

Phonebook. If only area codes are

entered, relevant phone numbers

can be added to these manually

before dialling.

Auto key lock

If activated, the keypad is locked

automatically if no key has been

pressed for one minute in standby

mode. This prevents the phone from

being used accidentally. However,

you can still be called and you can

still make an emergency call.

If the SIM card does not support

PIN 2 input, the whole Phonebook

can be protected with the phone

code.

Additional information

The keypad can also be directly locked and

unlocked in idle state.

This SIM only

(Phone-code protected)

The phone can be connected to a

SIM card when the phone code is

entered. Unless the phone code is

known the phone will not operate

with a different SIM card.

In each case:

Hold down .

Direct call

(Phone-code protected)

If the phone is to be used with a dif-

ferent SIM card, enter the phone

code when requested.

Only one phone number can be

dialled(see also p. 28).

Codes

Description, see p. 17:

PIN control, Change PIN, Change PIN2,

Chg.phonecode

When roaming

Barrings

You do not receive calls when you

Barring restricts the use of your SIM

card (not supported by all service

providers). You need a 4-digit net-

work password for network barring.

Your service provider will give you

this password. You may need to be

registered separately for each

barring.

are outside your home network. This

means that no charges are incurred

for incoming calls.

Status check

The following information can be

displayed after a status check:

Barring set.

All outgoing

All outgoing calls except emergency

numbers are barred.

Barring not set.

Status unknown

(e. g. new SIM card).

Outgo internat

(International outgoing)

Only national calls can be made.

Clear all

All barrings are deleted. A password

which the service provider will give

you is necessary for this function.

Out.int.x home

(International outgoing without

home country)

International calls are not permitted.

However you can make calls to your

home country when abroad.

All incoming

The phone is barred for all incoming

calls (forwarding of all calls to mail-

box provides a similar effect).

Network

C _¢¢_ST_el¢_ectN_fe_utw_no_ctrk_ion.

Network info

The list of GSM networks currently

available is displayed.

Indicates non-authorised

Line

service providers

(depending on SIM card).

This function is only displayed if it is

supported by the service provider.

Two separate phone numbers must be

registered on the phone.

Choose netwrk

Network search is restarted. This is

useful if you are not on your home

network or want to register on a dif-

ferent network. The network list is

rebuilt when Auto network is set.

Select line

Select the currently used phone

number.

Display current phone

number.

Protected

Auto network

Activate/deactivate, see also "Choose

netwrk" above. If "Automatic net-

work" is activated, the next network

on the list is dialled in ranking order

of your "preferred networks". Other-

wise a different network can be

selected manually from the list of

the available GSM networks.

(Phone-code protected)

You may limit usage to one phone

number.

Additional information

Special settings may be made for each

phone number (e.g., melody, call divert

etc.) To do this, first switch to the required

phone number.

Preferred net

Switch from phone number/connection in

standby mode:

Enter your preferred service provid-

ers here for when you leave your

home network (e.g. if there are dif-

ferences in price).

Press.

§Line 1§

Press.

Your service provider is displayed:

User group

§List§

Display list of preferred

networks.

Depending on service provider, you

can create groups with this service.

These can have access to internal

(company) information, for exam-

ple, or special tariffs apply. The

details can be clarified with your

service provider.

Create/change entry:

<Empty> or select an existing entry,

then select a new service

provider in the list and

confirm.

Active

Record new service provider (last

entry in the list):

Activate/deactivate function. "User

group" must be deactivated for nor-

mal phone use.

Furth.network

Select, enter the provider data and

save it.

Select group

You can select or add groups other

than preferred groups (see below).

Code numbers for the groups are

obtained from your service provider.

Additional information

If you are outside your home network, your

phone automatically dials another GSM

network.

If the signal strength of the preferred net-

work is inadequate when you switch on the

phone, the phone may register in a different

network. This can change when the tele-

phone is next switched on or if another net-

work is selected manually.

All outgoing

In addition to network control for a

user group, it is possible to set

whether outgoing calls outside the

group are permitted. If the function

is deactivated, only calls withinthe

group are permitted.

Band selection

Select either GSM 900, GSM 1800 or

GSM 1900.

Pref. group

If activated, calls may only be made

within this standard user group

(depending on the network configu-

ration).

Fast search

When this function is active, net-

work reconnection is speeded up

(standby time is reduced).

Accessories

C _¢¢_ST_el¢_ectA_fc_uc_nes_cs_tio_or_nie_.s

Headset

Only in conjunction with an original

Siemens headset (see accessories). If

an original Siemens Headset is used

the profile is automatically activated

when the headset is plugged in.

Car Kit

Only in combination with an original

Siemens handsfree Car kit (see

Auto answer

accessories). The car kit profile is

activated automatically as soon as

the phone is inserted into the cradle.

(factory default: off)

Calls are accepted automatically

after a few seconds (except where

the ringer is switched off or set to

beep). You should therefore be

wearing the headset.

Auto answer

(factory default: off)

Calls are accepted automatically

after a few seconds. Eavesdropping

is possible!

Automatic setting

Accept call with Call key or PTT key

(Push To Talk), even when the auto

key lock is activated.

Shown on the display.

Automatic switch off

(factory default: 2 hours)

The phone is powered by the car's

power supply. You can adjust the

time between switching off the igni-

tion and the automatic switching off

of the phone.

Auto answer

If you do not notice that you phone has

accepted a call, there is the danger that the

caller may eavesdrop.

Car loudspk.

Improves playback in certain circum-

stances.

Automatic settings

• Permanent illumination:

switched on.

• Key lock: switched off.

• Charging the phone battery.

• Auto. activation of the Car Kit

profile when phone is inserted

in cradle.

My menu

Press.

Change menu

§My menu§ Press.

You can replace each entry (1–10)

with another entry from the selec-

tion list.

Create your own menu with fre-

quently used functions, phone num-

bers or WAP pages.

Select the required entry.

The list of 10 entries is preset. You

can, however, change it as you

want.

§Change§ The function list is opened

for selection.

Select the new entry from

the list.

Use

Confirm. The entry is

saved.

Select the required entry.

If Phonebook is selected,

the phone number must

also be selected; if Inter-

net is selected, the book-

mark must also be

Confirm.

If the entry selected is a

phone number, you can

also call it with the Call

key.

selected.

Reset all

(Telephone code required)

§Reset all§ Select. After a safety

query, the pre-assign-

ment is reset.

Fast access key

You can assign one important phone

number of a function to each one of

the two soft keys and number keys

2 to 9 (speed-dial numbers). The

phone number can then be dialled or

the function can be started at the

touch of a button.

Soft keys

Change

For example, the Internet function is

assigned to the soft key. To change

this (in standby mode):

§Internet§ Press briefly.

§Change§ Scroll to new assignment

in the list.

Service provider

Confirm.

• Special case Phone number. Pick

out a name from the Phone-

book/Addressbook for assignment

to the key.

01.03.2004

Internet

10:10

Help

• Special case Bookmark. Scroll to

a URL in the bookmark list for

assignment to the key.

Additional information

The service provider may have already

assigned functions to a soft key (e.g

access to "SIM services" or direct call-up of

the Internet portal). It may not be possible

to modify this key assignment.

The left soft key may sometimes be

replaced automatically by p /À to

access a new message for example.

Apply

In standby mode:

Application

The "Internet" is just used as an

example here.

§Internet§ Press and hold, the appli-

cation is started.

Phone number:

The setting "Carola" is used here only

as an example.

§Carola§

Press and hold, the phone

number is dialled.

Fast access key

Apply

Speed keys

Select a stored phone number or

start a stored application (e. g.

Internet).

Number keys 2 to 9 can be used as

speed dialling numbers for fast

access. Number key 1 is reserved for

the mailbox phone number (p. 60)

and number key 0 is reserved for

switching over two connections dur-

ing use (p. 92).

In standby mode:

Press briefly.

The assignment of the number key 3

is displayed above the right soft key

e.g.:

Change

In standby mode:

§Internet§ Press down.

Or simply

number key briefly press

(e.g. 3).

Hold down.

This number is still free:

§Set§

Press.

Select a new function

from the list and confirm

with §OK§.

An assignment has

already been made to this

key (assignment dis-

played above the right

soft key):

§Change§

Press briefly.

Scroll to application in the

list.

Confirm.

• Special case Phone number. Pick

out a name from the Phone-

book/Addressbook for assignment

to the key.

• Special case Bookmark. Scroll to a

URL in the bookmark list for

assignment to the key.

Organiser

Daily view

Calendar

Special displays:

Description of appointment.

Navigation:

C ¢Q¢Calendar

You can enter appointments in the

calendar. Time and date must be set

for the Calendar to work correctly.

One day forward/back.

The calendar offers you three views:

To the start/end of the day

or next/last entry.

Monthly view

Special colour coding:

Calend. setup

Day with entries for appointments,

day-long appointments, weekend

C ¢Q¢Calend. setup

Start of day:

Navigation:

Hour when the working day begins.

One day forward/back.

Start of week:

Weekday on which the monthly and

weekly view on the left starts

One week forward/back.

Daily view open.

Set weekend

Set the days for the weekend.

Show birthday:

Weekly view

Special displays:

Appointments are shown as a verti-

cale colour bar on the horizontal

hour division.

Synchronising with a PC

With the mobile phone manager (p. 113),

you can compare appointments, tasks and

memos with Outlook®.

Navigation:

One day forward/back.

Forward/backward by the

hour through the day.

Organiser

Different input/selection fields are

displayed depending on the type.

The number of fields can be

restricted, see Standard at the end

of the list.

Appointments

C ¢Q¢Appointments

Appointments are displayed in

chronological order in a list.

Description:

Description of appointment.

Enter new appointment

Phone number:

Enter a phone number or select one

from the Addressbook.

Select.

Types:

Memo

Voice memo:

Enter a voice recording, see Dictating

mac, p. 102.

Text input for description

Voice memo

Entervoicememo. Shown

Location:

Location of appointment.

with alarm.

Call

Whole day:

All-day appointment: Yes/No

Enter phone number to

be displayed with the

alarm.

Start date:

Date when appointment starts.

Meeting

Start time:

Time when appointment starts.

Text input for description

Holiday

End date:

Date when appointment ends.

Enter start and end date.

Birthday

End time:

Time when appointment ends.

Enter name and date.

100

Organiser

Alarm time:

Information on the alarm

On/off or Silent alert.

When the set date and time are

reached there is an audio and a vis-

ual alarm. If an alarm is missed it

appears in the list of missed appoint-

ments (p. 101).

Enter the timespan before

the appointment and

select the time unit:

Minutes, Hours, Days.

Alarm type Memo:

Reoccurrence:

Select a timeframe for repeating the

appointment:

Meeting: the text is shown in the dis-

play.

Alarm type Call: The phone number

is displayed and can be dialled

immediately.

No, Daily, Weekly, Monthly, Yearly.

Enter a parameter for repeating:

Forever, Until, Occurrences (number)

Alarm type Birthday: You can send

special birthday greetings by SMS,

MMS, e-mail or a call via §Options§.

If Weekly is selected, certain week-

days can be highlighted.

With Snooze you can set a repetition

of the alarm.

Standard

In the list, select those fields which

are to be offered for future entries.

Tasks

Additional information

C ¢Q¢Tasks

Display above set alarms:

A task is displayed like an appoint-

ment in the agenda of the selected

day. However, unlike an appoint-

ment it does not require a time.

When no time is entered the task

appears at the top of the list every

day until it is marked as completed.

Alarm clock.

Appointment.

An alarm sounds even when the phone is

switched off (except in Aircraft mode,

p. 75). The phone does not go to standby

mode. To deactivate it press any key.

The entries are made in the same

way as Appointments (see "Appoint-

ments").

Organiser

101

Status:

Missed appts.

Choose between: Done or Outstanding

C ¢Q¢Missed appts.

Priority:

Events with an alarm (Appointments,

Tasks) to which you have not reacted

are listed for reading.

Selection in 5 levels of Lowest bis

Highest.

Use date

If activated with Yes, the following

Organiser options

Depending on the application used

(Calendar, Appointments, Tasks, Notes)

and the current situation, different

functions are offered.

time-input option is offered.

Due date:/Expiry time:

Enter the date and time by when the

task is to be completed.

§Options§ Open menu.

Alarm: and Standard as for Appoint-

ments.

Delete

Delete entry.

Delete until

Delete all entries prior to a

certain date.

Notes

C ¢Q¢Notes

Delete all

Delete all entries after

confirmation.

Write and administer brief text

memos.

Delete

done

Delete all completed tasks.

Enter a new memo

Activate/

Deactivate

Switch alarm on/off.

Select.

Filter

Display all entries with the

selected feature.

Enter text The first line is

displayed as “Title” in the

memo list. Total length:

max. 160 characters.

Confiden-

tial

Protect note with phone

code. We recommend that

you do not store any pass-

words (PIN, TAN etc.) as

notes.

§Options§ Open menu.

Save

Save memo. When Confi-

dential is selected, a memo

is protected with the tele-

phone code.

(For standard functions see p. 15)

102

Organiser

New recording

Dictating mac

C ¢Q¢Dictating mac

Select.

Use the dictating machine to record

short voice memos.

The remaining time avail-

able as well as the record-

ing time are shown in the

display.

• Use your phone as a dictating

machine when on the move.

• Record a memo as a reminder or

as a note for others.

A brief tone sounds when

the recording starts. Now

say the text.

• Add a voice memo to an appoint-

ment in the Calendar.

Pause/recording alter-

nately.

• Record a call – useful for remem-

bering numbers or addresses.

End recording.

Warning!

The recording is automat-

ically saved with a time

stamp. Rename with

§Options§.

The use of this feature may be subject to

restrictions under criminal law.

Please inform the other party to the conver-

sation in advance if you want to record the

conversation and please keep such record-

ings confidential.

Playback

Select the desired record-

ing.

You may only use this feature if the other

party to the conversation agrees.

Playback/pause, alter-

nately.

D E

Press and hold rapid

rewind and fast forward.

Dictating machine options

§Options§ Open menu.

Loudspeaker

Playback via the built-in

loudspeaker.

(For standard functions see p. 15)

Organiser

103

Time zones

C ¢Q¢Time zones

The time zone can be selected in the

world map or a city list:

World map

Select the desired record-

ing.

City list

Select a city in the

selected time zone.

Time zone options

§Options§

Open menu.

Set

Specify the time zone.

Auto time

The time zone is switched

automatically to local time

by the network.

zone

Search city

Help

Search for a city.

Operating instructions.

104

Extras

Set alarm call time

(hh:mm).

SIM services (optional)

C ¢ ¢SIM services

Switch to the week days.

Your service provider may offer spe-

cial applications such as mobile

banking, share prices, etc. via the

SIM card.

Navigate to the various

days.

Display options: alarm call

time and days.

If you have such a SIM card, the SIM

services will appear in the main

menu under "Extras" or directly

above the soft key (on the left).

Alarm clock

§On§

Symbol for SIM services.

07:30

Where there are several applications,

these are displayed in a SIM services

menu. With the SIM services menu,

your phone can support future addi-

tions in your service provider's user

package. For further information,

please contact your service provider.

Mo Tu We Th Fr Sa Su

Edit

Set days for alarm calls.

Press again to delete the

highlighting.

Alarm clock

Press and hold to highlight/

unhighlight all the days.

C ¢ ¢Alarm clock

The alarm will ring at the time set by

you, even when the phone is

switched off.

§OK§

Confirm setting.

Additional information

Screen display in standby

mode: alarm clock activated.

Activate/deactivate the

alarm.

With Snooze you can set the alarm to

Switch to time setting.

repeat.

Extras

105

Playback

Sound recorder

Select the desired record-

ing.

Use the sound recorder to record

noises and tones for use as ring

tones. The tone recording is nor-

mally started by other applications/

functions such as "assign ring tone".

D E

Playback/pause, alter-

nately.

Press and hold rapid

rewind and fast forward.

New recording

§Options§ Open menu.

Start from main menu

Loudspeaker

Playback via the built-

in loudspeaker.

C ¢ ¢Sound recorder

Set as...

Set the recording as a

ringtone.

Select.

The remaining time avail-

(For standard functions see p. 15)

able as well as the record-

ing time are shown in the

display.

Start it from another application

as follows

The recording display appears:

A brief tone sounds when

the recording starts.

Pause/record alternately.

End recording.

The recording is saved

with a timestamp in the

folder Sounds. Rename

with §Options§.

§Insert§

Transfer recording into

the application.

106

Extras

Calculator options

§Options§ Open menu.

Calculator

C ¢ ¢Calculator

The calculator can be used in a basic

version and with an advanced range

of functions. The input line and two

calculation lines (including the

matrice with the calculation func-

tions) are located in the top display

half.

Convert

Call up the unit con-

verter with the current

result.

Clear all

Delete all units.

Extended mode/

Basic mode

Convert calculation

functions.

(For standard functions see p. 15)

Enter number(s).

Navigate functions.

Unit converter

Use function. The result is

calculated and displayed

immediately.

C ¢ ¢Unit converter

You can convert various measure-

ment units into other measurement

units.

Basic functions:

+, -, *, /

Basic calculation types.

Result.

The following types are offered with

various units:

1/x

Conversion

Velocity

Energy

Mass

Pressure

Time

Convert to percentage.

Decimal point.

Sign change "+" / "–"

§Options§ Expansion of the range of

Volume

Area

functions:

Length

Power

Temperature

Currency

Square root

Square

Exponent.

M+

save displayed number.

Call up saved number.

Insert number from memory.

Example of type Velocityunits:

Type

Units

Velocity

Kilometres/h, d Calls,

Metres/sec, Miles/h, Miles/

sec, Knots, Mach

Extras

107

Now enter the name and exchange

rate of the currency to be converted.

Convert

Select the source unit/

currency.

§Options§ Open menu.

Switch to the input field.

Add currency

Enter new currency and

exchange rate.

Enter the quantity to be

converted.

Set as base

Edit rate

Calc.

Use entered currency as

basic currency.

Switch to the selection

field.

Change the exchange

rate of the basic currency.

Select the target meas-

urement unit / currency

The result is displayed.

Start calculator.

(For standard functions see p. 15)

You can use both input fields alter-

nately.

Special key functions:

Stopwatch

Set decimal point.

C ¢ ¢Stopwatch

Change prefix.

Two intermediate times can be

recorded and saved.

Currency

Start/stop.

When you call up the function, you

must enter a basic currency into

which the conversions are to be

made.

Save intermediate time.

After a stop:

Reset to zero.

Enter currency

(e. g. euro)

Stopwatch options

§Options§ Open menu.

§Save§

Store entry.

Stopwatch

list

Display saved entries.

(For standard functions see p. 15)

108

Extras

Countdown

Remote synchronisation

C ¢ ¢Countdown

C ¢ ¢Remote sync.

A set time elapses. The last

3 seconds are indicated by a beep. At

the end a special beep sounds.

You can use this function remotely

to access externally filed data

(addresses, calendar, etc.) and syn-

chronise these with the data on your

phone. The data can, for example,

be saved on a company computer or

in the Internet.

If no time has been enetered:

Open input window

Set period of time.

www.siemens-mobile.com/syncml

Confirm.

Syncronise

§Sync§

If a countdown time is specified:

The computer is selected

and synchronisation

started. When completed,

the actions which have

been performed are dis-

played.

Start countdown.

While the time is elapsing:

Interrupt counter.

Let counter continue

running.

§Next§

Scroll through the various

displays.

§Reset§

Reset counter to starting

time.

Sync. setting

The following settings can be made

prior to synchronisation:

Sync. profile

You can choose between 5 profiles.

Select profile.

Activate profile.

§Edit§

Set profile

Extras

109

Server sett.

Providers

Last sync:

Time of the last synchronisation.

Display the current service

provider.

Sync. mode

• Sync data: Modified data or All data

Homepage:

e.g. www.siemens-

mobile.com/

cx65syncml

• Sync direction: Two-way, Mobile

update or Server update

Port:

Enter port number, e.g. 80.

Date range

Select On/off

Enter user name (Login

name).

Enter the time in weeks in which

entries (past and future) are to be

synchronised.

Password:

Enter password (shown as

a series of asterisks).

Sync items:

Highlight database areas to be

synchronised:

Calendar

path

Contacts

path

Notes path

Task path

e.g., events

e.g., contacts

Calendar

Addressbook

Notes

e.g., notes

e.g.,tasks

HTTP

authenti-

fica.:

Confirmation required; Yes/

No (if No, the input fields

are not visible).

Tasks

Save settings.

HTTP name:

Enter name.

HTTP

password:

Enter password.

110

Media player

When you are viewing a picture/

video or listening to a melody, the

application starts a media playback.

Melodies/video

The media playback offers the fol-

lowing functions for melody and

video playback:

Scroll to the next media

file.

Play or pause, depending

Switch on display light-

ing.

–

0 9

on the situation.

Set volume.

§Stop§

Pictures

The following functions can be

applied to a displayed picture:

Mute.

Stop function.

End playback.

Zoom function if the dis-

played picture has a

higherresolutionthan the

display. The two soft keys

(+/–) enlarge/reduce the

picture. The joystick

Options

§Options§ Open menu.

Different functions are offered

depending on the starting situation

and the object.

moves the picture detail.

5 Centre the picture.

Volume

Set the volume with the

joystick.

Switch to full-picture

mode and back again.

Set as...

Set picture as Wallpaper,

Logo for example, and

sounds for Incoming call,

Startup melody, for

example.

§Send§

e.g. send via MMS or

e-mail.

Slideshow

Edit

Automatic run-through in

full-picture mode. Individ-

ual picture connection with

joystick.

Access to picture editing.

(For standard functions see p. 15)

My stuff

111

My stuff

To organise your files, you can use

the file system like a PC file manager.

There are some folders in My stuff for

the various data types for this pur-

pose.

Own file options

§Options§ Open menu.

Move

Copy

Paste

Place highlighted file(s)

or folder in temporary

memory.

C ¢N

The list of the folders and files is dis-

played.

Place highlighted file(s)

or folder in temporary

memory.

Navigation

Transfer content of tem-

porary memory into cur-

rent folder.

Select file/folder in lists.

The cursor can be moved

freely in the preview.

New folder

Thumb. view

Attributes

Create a new folder and

name it.

Open folder or start file

with related application

Switch over to miniature

view.

The application for the folder cur-

rently selected is loaded.

Display information on

file or folder selected.

(For standard functions see p. 15)

The WAP browser is started and the

download page displayed.

112

My stuff

Depending on the service provider, the

structure, content and functionality of My

stuff may vary.

Index structure

Some folders have already been cre-

ated for different data types in My

stuff. These folders cannot be

changed.

Folder

Description

Format

bmp

bmx

Pictures

jpg/jpeg

png

gif

Videos

3gp

Videos

Anima-

tions

bmx

gif

Switch on/off ani-

mations

Sounds

mid

amr

wav

sdt

Melodies

Themes

Loaded theme

(zipped)

stc

Theme configura-

tion (unzipped)

Skins

scs

Loaded user inter-

faces.

Games

jar

Java archive

jad

Download info

Applica-

tions

Applications.

Misc

tmo

Text modules

vmo

Voice recordings

Mobile Phone Manager

113

Mobile Phone Manager

The Windows®-PC program Mobile

Phone Manager allows you to use

expanded telephone functions from

your PC. For example, you can

SMS and MMS management

update your Addressbook in the tele-

phone, read, save or send SMS and

MMS, or synchronise your telephone

with Outlook®. The telephone and

PC communicate with each other via

a data cable (accessories, p. 122).

Create MMS and SMS quickly and

easily from your PC. Use all the

options which your PC offers you for

these messages and use your sounds

and pictures in designing the MMS

and EMS. You can read, forward,

print out, delete and save your mes-

sages.

Backup and restore

You can download the software

from the Internet:

www.siemens-mobile.com/cx65

Contacts Management

With the backup function, you can

save a backup compy of your tele-

phone data on the PC. If you lose

your data on the telephone or you

replace the telephone, you can then

rapidly restore all the data.

With the contacts management

function, you can manage your per-

sonal contacts in your telephone,

add new ones, and delete or change

them. You can adjust and copy con-

tacts between your telephone,

Outlook® and other Siemens tele-

phones (incl. Gigaset).

114

Mobile Phone Manager

Bookmarks management

(browser & bookmarks)

Image and photo processing

The image/photo processing func-

tion allows the user to create, proc-

ess and manage images and photos

easily. Filters and effects are availa-

ble with which colourful and attrac-

tive graphics can be created. The

user-friendly user interface allows

you to transfer images/photos from

and into your mobile telephone very

easily and to change their graphic

settings.

Browse through the WAP with your

PC and specify your preferred WAP-

pages. Save the WAP-addresses as

bookmarks on your telephone so

that you can then call them up

quickly later on.

Phone explorer

Ringtone and MP3 management

(sound)

You can read your telephone’s file

system with the phone explorer.

Files such as pictures and sounds etc.

can be easily copied between tele-

phone and PC using the drag&drop

function.

The sound module allows the user to

easily manage nearly all sound for-

mats and to save them on the tele-

phone. This module also supports

MP3 play lists and the configuration

of your ringtones.

GPRS modem

The GPRS modem creates an Internet

link via your mobile telephone so

that you can surf on the Internet

with your laptop at the press of a

button wherever you are.

Questions & Answers

115

Questions & Answers

If you have any questions on the use of your phone, you can contact us at

www.siemens-mobile.com/customercare around the clock. As further help we have listed

below some frequently asked questions and answers.

Problem

Possible causes

Possible solution

Phone cannot be

switched on.

On/Off key not pressed long

enough.

Press On/Off key for at least two seconds.

Flat battery.

Charge battery. Check charging indicator in the dis-

play.

Battery contacts dirty.

Clean contacts.

See also below under “Charging

error”

Too little standby

time.

Frequent use of organiser and Restrict use if necessary.

games.

Fast search activated.

Display illumination on.

Deactivate speed search(p. 93).

Switch off display illumination (p. 78).

Activate key lock (p. 90).

Unintentional keystrokes

(illumination!).

Charging error

(charge icon not dis-

played).

Battery totally discharged.

1) Plug in charger cable, battery is on charge.

2) Charge icon appears after approx. 2 hours.

3) Charge battery.

Temperature out of range:

+5 °C to +40 °C.

Make sure the ambient temperature is right, wait for

a while, then recharge.

Contact problem.

Check power supply and connection to the phone.

Check battery contacts and telephone connection

socket, clean them if necessary, then insert battery

again.

No mains voltage.

Use different mains power socket, check mains

voltage.

Wrong charger.

Battery faulty.

Only use original Siemens accessories.

Replace battery.

SIM error.

SIM card not inserted correctly. Check that the SIM card is inserted correctly (p. 9).

Dirty SIM card contacts.

SIM card with wrong voltage.

Clean SIM card with a dry cloth.

Use 3V SIM cards only.

SIM card damaged (e.g. bro-

ken).

Carry out a visual check. Change SIM card at serv-

ice provider.

116

Questions & Answers

Possible causes

Problem

Possible solution

No network connec- Weak signal.

tion.

Move higher, to a window or an open space.

Check service provider's coverage area.

Complain to the service provider.

Outside GSM range.

Invalid SIM card.

New network not authorised.

Try manual selection or select a different network

(p. 92).

Network call barring is set.

Network overloaded.

Signal too weak.

Check network barrings (p. 91).

Try again later.

Phone loses net-

work.

Reconnection to another service provider is auto-

matic (p. 92). Switching phone off and on again can

speed this up.

Calls not possible. Second line set.

New SIM card inserted.

Set first line \ (p. 93).

Check for new barrings.

Reset limit with PIN 2 (p. 39).

Load credit.

Charge limit reached.

Credit used up.

Certain uses of

phone not possible.

Call restrictions are in place.

Barrings can be set by service provider.

Check barrings (p. 91).

Impossible to make Phonebook/Addressbook is full. Delete entries in Phonebook /Addressbook (p. 15).

entries in Phone-

book/Addressbook.

Voice message not Call divert to mailbox not set.

functioning.

Set call divert to mailbox (p. 60).

Delete or file SMS (p. 15).

Delete MMS (p. 15).

flashes to indi- SMS memory is full.

cate an SMS.

flashes to indi- MMS memory full.

cate an MMS.

flashes to indi- Phone memory full.

Delete messages, pictures, videos, games or appli-

cations.

cate an MMS.

Function cannot be Not supported by service pro- Contact your service provider.

set. vider or registration required.

Capacity problems Phone memory full.

with, for example,

Delete files in the relevant areas. You can use the

memory assistant to delete specific files (p. 84).

Games & More, ring-

tones, pictures, vid-

eos, SMS archive.

No WAP access,

downloading not

possible.

Profile not activated, profile set- Activate or set WAP profile (p. 71). If necessary ask

tings wrong/incomplete. your service provider.

Questions & Answers

Possible solution

117

Problem

Possible causes

Text message can- Service provider does not sup- Contact your service provider.

not be sent.

port this service.

Phone number for service cen- Set service centre (p. 47).

tre not set or incorrectly set.

SIM card contract does not sup- Contact your service provider.

port this service.

Service centre too busy.

Repeat message.

Recipient does not have a com- Check.

patible phone.

EMS pictures &

Destination phone does not sup-

sounds are not dis- port the EMS standard.

played at the desti-

nation phone

No Internet access Incorrect WAP profile set, or

Check WAP settings; (p. 71) contact your service

possible.

wrong or incomplete settings. provider if necessary.

PIN error/

PIN2 error.

Three wrong entries.

Enter the PUK (MASTER PIN) supplied with the

SIM card according to the instructions. If the PUK

(MASTER PIN) has been lost, please contact your

service provider.

Phone code error. Three wrong entries.

Contact Siemens Service (p. 118).

Service provider

Code error.

No authorisation for this service. Contact your service provider.

Too few/too many

menu entries.

Functions may have been

added or deleted by the service

provider via the SIM card.

Check with your service provider.

No fax possible.

Wrong settings in the PC.

Check settings (p. 89).

No authorisation for this service. Contact your service provider.

Charge meter does Charge pulse is not transmitted. Contact your service provider.

not work.

Damage

Severe shock.

Remove battery and SIM and re-insert them. Do not dismantle the phone!

Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry

connector contacts thoroughly. Stand mobile upright in an air current. Do not disman-

tle the phone!

Reset all settings to factory default p. 85: # 9 9 9 9 #

118

Customer Care

If repair work is necessary, please contact

one of our service centres:

We offer fast, individual advice! You have

several options:

Abu Dhabi .........................................0 26 42 38 00

Argentina .....................................0 80 08 88 98 78

Australia..........................................13 00 66 53 66

Austria.............................................05 17 07 50 04

Bahrain .................................................... 40 42 34

Bangladesh.......................................0 17 52 74 47

Belgium.............................................0 78 15 22 21

Bolivia ...............................................0 21 21 41 14

Bosnia Herzegovina..........................0 33 27 66 49

Brazil............................................0 80 07 07 12 48

Brunei ................................................. 02 43 08 01

Bulgaria............................................... 02 73 94 88

Cambodia ........................................... 12 80 05 00

Canada ........................................1 88 87 77 02 11

China ...........................................0 21 50 31 81 49

Croatia ..............................................0 16 10 53 81

Czech Republic...............................02 33 03 27 27

Denmark ............................................. 35 25 86 00

Dubai ................................................0 43 96 64 33

Egypt.................................................0 23 33 41 11

Estonia................................................ 06 30 47 97

Finland............................................09 22 94 37 00

France.............................................01 56 38 42 00

Germany......................................0 18 05 33 32 26

Greece.........................................0 80 11 11 11 16

Hong Kong.......................................... 28 61 11 18

Hungary ..........................................06 14 71 24 44

Iceland .................................................. 5 11 30 00

India.............................22 24 98 70 00 Extn: 70 40

Indonesia .....................................0 21 46 82 60 81

Ireland.............................................18 50 77 72 77

Italy ................................................02 24 36 44 00

Ivory Coast.......................................... 05 02 02 59

Jordan...............................................0 64 39 86 42

Kenya.................................................... 2 72 37 17

Kuwait................................................... 2 45 41 78

Latvia .................................................... 7 50 11 18

Lebanon.............................................. 01 44 30 43

Libya ...............................................02 13 50 28 82

Lithuania ...........................................8 52 74 20 10

Luxembourg........................................ 43 84 33 99

Macedonia .......................................... 02 13 14 84

Our online support on the Internet:

www.siemens-mobile.com/customercare

We can be reached any time, any place.

You are given 24 hour support on all

aspects of our products. Here you will find

an interactive fault-finding system, a com-

pilation of the most frequently asked ques-

tions and answers, plus user guides and

current software updates to download.

You will also find the most frequently

asked questions and answers in the sec-

tion entitled xxx in this user guide.

You can also get personal advice about our

range of products on our Premium Hotline:

United Kingdom...................0906 9597500

(0.75 £ per minute)

Qualified Siemens employees are waiting to

offer you expert information about our prod-

ucts and installation.

In some countries repair and replace serv-

ices are impossible where the products are

not sold through our authorised dealers.

When calling customer service, please have

ready your receipt and the phone identity

number (IMEI, to display press # 0 6 #), the

software version (to display, press # 0 6 #,

then info) and if available, your Siemens

Service customer number.

Customer Care

119

Malaysia....................................+ 6 03 77 12 43 04

Malta.......................................+ 35 32 14 94 06 32

Mauritius ................................................2 11 62 13

Mexico .......................................01 80 07 11 00 03

Morocco...............................................22 66 92 09

Netherlands .................................0 90 03 33 31 00

New Zealand...................................08 00 27 43 63

Nigeria ..............................................0 14 50 05 00

Norway.................................................22 70 84 00

Oman....................................................... 79 10 12

Pakistan..........................................02 15 66 22 00

Paraguay ..........................................8 00 10 20 04

Philippines ........................................0 27 57 11 18

Poland.............................................08 01 30 00 30

Portugal ............................................8 08 20 15 21

Qatar....................................................04 32 20 10

Romania .........................................02 12 04 60 00

Russia..........................................8 80 02 00 10 10

Saudi Arabia .....................................0 22 26 00 43

Serbia .............................................01 13 07 00 80

Singapore ............................................62 27 11 18

Slovak Republic ..............................02 59 68 22 66

Slovenia............................................0 14 74 63 36

South Africa ....................................08 60 10 11 57

Spain.................................................9 02 11 50 61

Sweden.............................................0 87 50 99 11

Switzerland .....................................08 48 21 20 00

Taiwan ............................................02 23 96 10 06

Thailand............................................0 27 22 11 18

Tunisia .................................................71 86 19 02

Turkey..........................................0 21 65 79 71 00

Ukraine ........................................8 80 05 01 00 00

United Arab Emirates........................0 43 31 95 78

United Kingdom ...........................0 87 05 33 44 11

USA .............................................1 88 87 77 02 11

Vietnam...........................................84 89 30 01 21

Zimbabwe ............................................04 36 94 24

120

Care and maintenance

Your phone has been designed and

manufactured to the highest of

standards and should be treated

with great care. The suggestions

below will help you to enjoy your

phone for many years.

• Do not drop, knock or shake your

phone. Rough handling can dam-

age internal circuit boards!

• Do not use harsh chemicals, clean-

ing solvents, or strong detergents

to clean the phone!

• Protect your phone from moisture

and humidity! Precipitation,

The suggestions given above apply

equally to your phone, battery,

charger and all accessories. If any of

these parts are not working properly,

take them to your nearest qualified

service outlet. The personnel there

will assist you and, if necessary,

repair the device.

humidity and liquids contain min-

erals that will corrode electronic

circuits. Should your phone none-

theless become wet, disconnect it

immediately from any power sup-

ply, remove the battery and leave

the open phone to dry at room

temperature!

• Do not use or store the phone in

dusty, dirty areas. Its moving parts

may become damaged.

• Do not store your phone in hot

areas. High temperatures can

shorten the life of electronic

devices, damage batteries and

warp or melt certain plastics.

• Do not store your phone in cold

areas. When the phone warms up

again (to its normal ambient tem-

perature), moisture can form

inside the phone, which may dam-

age electronic circuit boards.

Product data

121

Phone ID

Product data

You will need the following details if you

lose your phone or SIM card:

the number of the SIM card (on the card):

..............................................................

15 digit serial number of the phone

(under the battery):

..............................................................

the customer service number of the service

provider:

..............................................................

Declaration of conformity

Siemens Information and Communi-

cation mobile hereby declares that

the phone described in this user

guide is in compliance with the

essential requirements and other rel-

evant provisions of European Direc-

tive 1999/5/EC (R&TTE). The declara-

tion of conformity (DoC) concerned

has been signed. Please call the com-

pany hotline if you require a copy of

the original, or:

Lost phone

If you lose your phone or SIM card contact

your service provider immediately to pre-

vent misuse.

www.siemens-mobile.com/conformity

Operating time

Technical data

The operating time depends upon

the respective conditions of use:

Extreme temperatures considerably

reduce the phone’s standby time.

Avoid placing the phone in the sun

or on a heater.

GSM class:

Frequency range: 880–960 MHz

GSM class: 1 (1 watt)

Frequency range: 1,710–1,880 MHz

GSM class: 1 (1 watt)

Frequency range: 1,850–1,990 MHz

4 (2 watt)

Call time: 100 to 330 minutes

Standby time: 60 to 300 hours

Action taken Time Reduction of stand-

(min) by time by

Weight:

Size:

90 g

101x46x18 mm

(78 ccm)

Calling

Light *

30–90 minutes

40 minutes

Li-Ion battery:

750 mAh

Network

5–10 minutes

Operating

temperature:

–10 °C… +55 °C

* Key input, games, organiser etc.

SIM card:

3.0 V

122

Accessories

Fashion & Carry

Handsfree Portable

CLIPit™ Covers

Headset PTT HHS-510

Headset PTT HHS-610

Headset with PTT key to accept and end

calls

Changeable top shells as well as keyboards

area available in specialist shops. Alterna-

tively, you can visit our online shop.

Carrying Cases

Office

Data Cable DCA-500

For connecting the phone to the serial

RS232 port of the PC.

A range of carry cases is available at spe-

cialist shops or you can visit the Siemens

Mobile Store online:

Original Siemens Accessories

Data Cable USB DCA-540

For connecting the phone to the USB port of

the PC. With load function.

www.siemens-mobile.com/

shop

SyncStation DSC-600

Energy

Table support for the telephone to facilitate

simultaneous data exchange and telephone

charging. Contains a desktop stand and a

data cable USB.

Li-Ion Battery (750 mAh) EBA-660

Spare battery.

Travel Charger

Travel Charger ETC-500 (EU)

Travel Charger ETC-510 (UK)

Travel charger with an extended input volt-

age range of 100–240 V.

Multitainment

Plug-in Flash IFL-600

Plug-in flash module for taking photos in

areas with low ambient light.

Car Charger Plus ECC-600

Charger for the cigarette lighter socket in

the car. It is possible to make telephone calls

during charging.

Accessories

123

Car Solutions

Mobile Holder HMH-680

Cradle without antenna port.

Mobile Holder HMH-685

The cradle for connecting an external

antenna. Ideal for use with headset PTT or

car kit portable.

Can also be used as cradle for retrofitting

your handsfree car kit (series 55).

Car Kit Comfort HKC-680

Handsfree kit with first-class digital call qual-

ity and supreme ease of use. Includes all

components needed for installation. The

individual antenna solution is available in

specialist shops.

Car Kit Easy HKP-600

Facilitates convenient handsfree talking with

high call quality. With the integrated, rotating

cradle and the flexible microphone position-

ing, the telephone can be optimally adjusted

to suit any vehicle interior. The power is sup-

plied via the cigarette lighter socket.

Optional Car Kit accessories

Car Data Adapter HKO-690

Phone-in adapter HKO-570

Products can be obtained in specialist shops

or you can visit the Siemens Mobile Store

online:

Original Siemens Accessories

www.siemens-mobile.com/

shop

124

Battery quality statement

Battery quality

statement

The capacity of your mobile phone

battery will reduce each time it is

charged/emptied. Storage at too

high or low temperatures will also

result in a gradual capacity loss. As a

result the operating time of your

mobile phone may be considerably

reduced, even after a full recharge of

the battery.

Regardless of this, the battery has

been designed and manufactured so

that it can be recharged and used for

six months after the purchase of

your mobile phone. After six

months, if the battery is clearly suf-

fering from loss of performance, we

recommend that you replace it.

Please buy only Siemens original

batteries.

Guarantee certificate (UK)

125

Guarantee certificate (UK)

Without prejudice to any claim the user (cus-

tomer) may have in relation to the dealer or

retailer, the customer shall be granted a

manufacturer's Guarantee under the condi-

tions set out below:

•

Ownership of devices or components re-

placed by and returned to Siemens shall

vest in Siemens.

This Guarantee shall apply to new devic-

es purchased in the European Union.

For Products sold in the United Kingdom

the Guarantee is issued by Siemens plc,

Siemens House, Oldbury, Bracknell,

Berkshire, RG12 8FZ.

Any other claims resulting out of or in con-

nection with the device shall be excluded

from this Guarantee. Nothing in this Guar-

antee shall attempt to limit or exclude a

Customers Statutory Rights, nor the man-

ufacturer's liability for death or personal

injury resulting from its negligence.

The duration of the Guarantee shall not

be extended by services rendered under

the terms of the Guarantee.

Insofar as no Guarantee default exists,

Siemens reserves the right to charge the

customer for replacement or repair.

The above provisions does not imply a

change in the burden of proof to the detri-

ment of the customer.

•

In the case of new devices and their com-

ponents exhibiting defects resulting from

manufacturing and/or material faults with-

in 24 months of purchase, Siemens shall,

at its own option and free of charge, either

replace the device with another device re-

flecting the current state of the art, or re-

pair the said device. In respect of parts

subject to wear and tear (including but

not limited to, batteries, keypads, cas-

ings, small parts on casings, protective

coverings where included in the scope of

delivery), this warranty shall be valid for

six months from the date of purchase.

This Guarantee shall be invalid if the de-

vice defect is attributable to improper

treatment and/or failure to comply with in-

formation contained in the user manuals.

This Guarantee shall not apply to or ex-

tend to services performed by the author-

ised dealer or the customer themselves

(e.g. installation, configuration, software

downloads). User manuals and any soft-

ware supplied on a separate data medi-

um shall be excluded from the

•

To invoke this Guarantee, please contact the

Siemens telephone service. The relevant

number is to be found in the accompanying

user guide.

Guarantee.

•

The purchase receipt, together with the

date of purchase, shall be required as ev-

idence for invoking the Guarantee.

Claims under the Guarantee must be

submitted within two months of the

Guarantee default becoming evident.

126

Guarantee certificate (IRL)

Without prejudice to any claim the user (cus-

tomer) may have in relation to the dealer or re-

tailer, the customer shall be granted a manu-

facturer’s Guarantee under the conditions set

out below:

dealer or the customer themselves (e.g. in-

stallation, configuration, software down-

loads). User manuals and any software

supplied on a separate data medium shall

be excluded from the Guarantee.

•

In the case of new devices and their com-

ponents exhibiting defects resulting from

manufacturing and/or material faults within

24 months of purchase, Siemens shall, at

its own option and free of charge, either re-

place the device with another device re-

flecting the current state of the art, or repair

the said device. In respect of parts subject

to wear and tear (including but not limited

to, batteries, keypads, casings, small parts

on casings, protective coverings where in-

cluded in the scope of delivery), this war-

ranty shall be valid for six months from the

date of purchase.

•

The purchase receipt, together with the

date of purchase, shall be required as evi-

dence for invoking the Guarantee. Claims

under the Guarantee must be submitted

within two months of the Guarantee default

becoming evident.

Ownership of devices or components re-

placed by and returned to Siemens shall

vest in Siemens.

This Guarantee shall apply to new devices

purchased in the European Union. For

Products sold in the Republic of Ireland the

Guarantee is issued by Siemens Ireland

Limited, Ballymoss Road, Sandyford

Industrial Estate, Dublin 18 - The Republic

of Ireland.

Any other claims resulting out of or in con-

nection with the device shall be excluded

from this Guarantee. Nothing in this Guar-

antee shall attempt to limit or exclude a

Customers Statutory Rights, nor the man-

ufacturer’s liability for death or personal in-

jury resulting from its negligence.

The duration of the Guarantee shall not be

extended by services rendered under the

terms of the Guarantee.

Insofar as no Guarantee default exists,

Siemens reserves the right to charge the

customer for replacement or repair.

The above provisions does not imply a

change in the burden of proof to the detri-

ment of the customer.

To invoke this Guarantee, please contact the

Siemens helpdesk on 1850 777 277. This

number is also to be found in the accompany-

ing user guide.

•

This Guarantee shall be invalid if the de-

vice defect is attributable to improper care

or use and/or failure to comply with infor-

mation contained in the user manuals.

In particular claims under the Guarantee

cannot be made if:

•

The device is opened (this is classed

as third party intervention)

Repairs or other work done by persons

not authorised by Siemens.

Components on the printed circuit

board are manipulated

•

The software is manipulated

Defects or damage caused by drop-

ping, breaking, lightning or ingress of

moisture. This also applies if defects or

damage was caused by mechanical,

chemical, radio interference or thermal

factors (e.g.: microwave, sauna etc.)

Devices fitted with accessories not au-

thorised by Siemens

•

This Guaranteeshall not apply to or extend

to services performed by the authorised

Menu tree

127

Menu tree

Default book

Show entries

Business card

Groups

Default book

Call records

Calls missed

Calls received

Calls dialled

Delete records

Durat/charges

All calls

All incom.calls

All outgoing

Remain. units

Charge sett.

Currency

Personal rate

Surf & fun

URL/service provider

Games

Account limit

Auto display

Applications

Downl. assis.

Bookmarks

Internet

Camera

Messages

Write message

Inst. message

SMS text

MMS

E-mail

128

Menu tree

Messages

Inbox

SMS

MMS

E-mail

WAP push

Retr. e-mail

Send/rec. mail

CB services

Draft

SMS

MMS

E-mail

Unsent

SMS

MMS

E-mail

Retr. e-mail

Send/rec. mail

Sent

SMS

MMS

E-mail

MMS templates

SMS archive

Text modules

Msg settings

Text zoom

SMS

SMS profiles

SMS signature

MMS

MMS profile:

User settings

Help

Menu tree

129

Messages

Organiser

Msg settings

E-mail

Accounts

General sett.

WAP push set.

Voice message

CB services

Help

Receive CB

Topic list

Calendar

Appointments

Tasks

CB languages

Notes

Missed appts.

Dictating mac

Time zones

Calend. setup

Extras

SIM services

Alarm clock

Sound recorder

Calculator

Unit converter

Stopwatch

Countdown

Remote sync.

My stuff

Setup

Profiles

Themes

Display

Language

Text input

Wallpaper

Logo

T9 preferred

Input language

Colour skin

Screensaver

Start up anim.

Shutdn anim.

130

Menu tree

Setup

Display

Own greeting

Big letters

Illumination

Dynamic light

Ring tones

Ringer setting

Silent alert

Volume

Incoming call

Messages

Alarm clock

Organiser

System

Applications

d Calls

Group calls

Other calls

More melodies

Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

Sound recorder

Call setup

Hide ID

Call waiting

Divert

All calls

Call screening

Any key answ.

Minute beep

Not reachable

No reply

Busy

Receiving fax

Receiving data

Status check

Clear all

Menu tree

131

Setup

Phone setup

Key tones

Info tones

Automatic switch off

Phone identity

Memory assis.

File system

Format

Master reset

Clean up

Clock

Time/date

Time zones

Date format

Time format

Buddhist year

Show clock

Auto time zone

Connectivity

GPRS

GPRS info

IrDA

Data services

HTTP profile

Authentication

Fax/data

Send voice/fax

Rec voice/fax

Rec fax/data

Security

Auto key lock

Direct call

Only ‚

Codes

PIN control

This SIM only

Change PIN

Change PIN2

Chg.phonecode

132

Menu tree

Setup

Security

Barrings

All outgoing

Outgo internat

Out.int.x home

All incoming

When roaming

Status check

Clear all

Network

Line

Select line

Protected

Network info

Choose netwrk

Auto network

Preferred net

Band selection

Fast search

User group

Active

Select group

All outgoing

Pref. group

Accessories

Car Kit

Auto answer

Automatic switch off

Car loudspk.

Key assignm.

Headset

Auto answer

SAR – European Union (RTTE)

133

SAR – European Union (RTTE)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

EN 50360. The SAR of mobile pho-

nes is determined in accordance

with the European Norm EN 50361.

This involves measuring the maxi-

mum value in all frequency bands of

the mobile phone with the phone

transmitting at its highest power

level. The actual SAR level of the

phone during normal operation may

be well below the maximum value.

This is because the phone is desig-

ned to operate at multiple power

levels so as to use only the power

required to reach the network. In

general, the closer you are to a base

station, the lower the power output.

THIS MOBILE PHONE MEETS THE

LIMITS SET BY THE EU (1999/519/EC)

FOR PROTECTION OF THE HEALTH

OF THE PUBLIC FROM THE EFFECTS

OF EXPOSURE TO ELECTROMAGNE-

TIC FIELDS

These limits are part of comprehen-

sive recommendations for the pro-

tection of the public. The recom-

mendations were developed and

confirmed by independent scientific

organisations through periodic and

thorough evaluation of scientific stu-

dies*. The limits include a substan-

tial safety margin designed to assure

the safety of all persons, regardless

of age and health.

The highest SAR value for this model

phone when tested for compliance

against the norm is

0.59 W/kg****

Before a radio equipment may be

placed on the market, compliance

with the European laws and the

respective technical limit require-

ments must be demonstrated. Only

then the CE mark may be affixed**.

The limit for mobile phones recom-

mended by the Council of the Euro-

pean Union employs a unit of

The SAR information can also be

found on the Siemens web site at

www.siemens-mobile.com

While there may be differences

between the SAR levels of various

phones and at various positions, all

Siemens products meet the legal

requirements.

measurement known as the Specific

Absorption Rate, or SAR. This SAR

limit is 2.0 W/kg***. This corres-

ponds with the requirements of the

International Commission for Non-

Ionizing Radiation Protection ICNIRP

and was adopted into the European

Norm for Mobile Radio Equipment

* The World Health Organization (WHO,

CH-1211 Geneva 27, Switzerland) states

that present scientific information does not

indicate the need for any special precautions

for use of mobile phones.

134

SAR – European Union (RTTE)

Further information:

www.who.int/peh-emf

www.mmfai.org

www.siemens-mobile.com

** The CE mark confirms that the product is

in compliance with the legal requirements of

the European Union as a prerequisite for the

placing on the market and the free move-

ment of goods within the European internal

market.

*** averaged over 10 g body tissue.

**** SAR values may vary depending on

national requirements and frequency bands.

SAR information for different regions can be

found at

www.siemens-mobile.com

SAR – International (ICNIRP)

135

SAR – International (ICNIRP)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

power level. The actual SAR level of

the phone during operation can be

well below the maximum value. This

is because the phone is designed to

operate at multiple power levels so

as to use only the power required to

reach the network. In general, the

closer you are to a base station, the

lower the power output.

THIS MOBILE PHONE MEETS THE

LIMITS FOR PROTECTION OF THE

HEALTH OF THE PUBLIC FROM THE

EFFECTS OF EXPOSURE TO ELECTRO-

MAGNETIC FIELDS

Your mobile phone is a radio trans-

mitter and receiver. It is designed

and manufactured not to exceed the

limits for exposure to radio fre-

quency (RF) energy recommended

by international guidelines from the

International Commission on Non-

Ionizing Radiation Protection

The highest SAR value for this model

phone when tested for use at the ear

0,59 W/kg***

SAR information can also be found at

www.siemens-mobile.com

(ICNIRP). These limits are part of

comprehensive guidelines for the

protection of the public and estab-

lish permitted levels of RF energy for

the population. The guidelines were

confirmed by independent scientific

organisations through periodic and

thorough evaluation of scientific stu-

dies*. The limits include a substan-

tial safety margin designed to assure

the safety of all persons, regardless

of age and health.

While there may be differences bet-

ween the SAR levels of various pho-

nes and at various positions, they all

meet the international guidelines for

safe RF exposure.

* The World Health Organization (WHO,

CH-1211 Geneva 27, Switzerland) states

that present scientific information does not

indicate the need for any special precautions

for use of mobile phones.

Further information:

The exposure limit for mobile pho-

nes employs a unit of measurement

known as the Specific Absorption

Rate, or SAR. The SAR limit stated in

the international guidelines is

2.0 W/kg**. Tests for SAR are con-

ducted in all frequency bands using

standard operating positions with

the phone transmitting at its highest

www.who.int/peh-emf

www.mmfai.org

www.siemens-mobile.com

** averaged over 10 g of tissue.

*** SAR values may vary depending on

national requirements and frequency bands.

information for different regions can be

found at

www.siemens-mobile.com

136

Index

Buddh. Date................................86

Business card ..............................3 0

Busy number...............................2 5

Accessories............................... 122

Additional books......................... 37

Addressbook

Dial entry................................ 33

Groups ................................... 34

New entry............................... 31

Read entry .............................. 33

Aircraft mode ............................. 75

Alarm

Alarm clock........................... 104

Type ..................................... 100

Alarm clock .............................. 104

All calls (call time/charge) ........... 39

All calls (diversion) ..................... 82

All incoming (barrings) ............... 91

Answering service (external)....... 60

Any to answer ............................ 83

Appointments ............................ 99

Authentication ........................... 89

Auto display

Clock ...................................... 86

Duration/charges .................... 39

Auto key lock.............................. 90

Auto time zone................... 86, 103

Auto. Network selection ............. 92

Auto. redial ................................ 25

Automobile accessories ............ 123

Calculator .................................1 06

Calendar .....................................9 8

Call

Ac cept/end..............................2 6

Barrin g ....................................9 1

Charges...................................3 9

Conference .............................2 7

Divert......................................8 2

End.........................................2 4

Hold........................................2 6

Menu ......................................2 8

Reject......................................2 6

Swap (change )........................2 6

Call back .....................................2 5

Call divert ...................................8 2

Call transfer ................................2 8

Call waiting........................... 27, 82

Calling ........................................2 4

Call s dialled (call list)...................3 8

Call s received (call list) ................3 8

Camera.......................................4 0

Car Kit

Accessories ...........................1 23

Settin g ....................................9 4

Car kit accessorie s .....................1 23

Care of phon e ...........................1 20

Cell Broadcast (CB )......................6 8

Central input...............................4 2

Change faceplate ........................1 1

Change keypad mat ....................1 1

Charge rate.................................3 9

Charges ......................................39

Charging the battery ...................10

Clock ..........................................86

Band selectio n ............................ 93

Battery

Charge.................................... 10

Insert........................................ 9

Operating time ............... 10, 121

quality declaration ................ 124

Big letters................................... 78

Bookmarks (WAP) ................. 69, 71

Browser...................................... 70

Index

137

Codes......................................... 17

Colour scheme ........................... 77

Conference................................. 27

Connection profiles .................... 88

Contact lis t ................................. 62

Control code (DTMF) .................. 29

Countdown .............................. 108

Credit limit ................................. 39

CSD settings ............................... 88

Customer care .......................... 118

Factory settings ..........................8 5

Fast a ccess..................................9 6

Fast se arch..................................9 3

Fax/data mod e ............................8 9

Filter...........................................8 3

Formatting (SMS text ).................4 3

Formatting

(telephone memory)...................85

Forwardi ng (call).........................2 8

Frequency rang e .........................9 3

Data connection ......................... 87

Date format................................ 86

Default book .............................. 30

Dialling code .............................. 24

Dialling with number keys .......... 24

Dictating machine .................... 102

Dierkter Anruf ............................ 28

Digital rights management ......... 13

Direct reply (SMS)....................... 47

Display

Games and applications ..............72

GPRS...........................................87

Groups........................................3 4

Guaran tee certificate ................1 25

Hand set volume..........................2 4

Hand sfree talking........................2 6

Headset

Accessories ...........................1 22

Settin g ....................................9 4

Hide ID .......................................8 2

Highli ghting mod e ......................1 6

Hold call ............................... 26, 28

Home networ k ............................9 2

Hotline .....................................1 18

Illuminatio n ............................ 78

Language ............................... 77

Symbols.................................... 7

Divert......................................... 82

Download .................................. 72

DTMF tones (tone sequences)..... 29

Duration/charges........................ 39

Dynamic Light ............................ 79

Identity number (IMEI )................8 4

IMEI numbe r ...............................8 4

Info ton es ...................................8 4

Information services (CB) ............6 8

Infrared ......................................8 7

Infrared (IrDA) ............................8 7

Input language (T9) ....................20

Inst. Message..............................61

International dialling code...........25

Internet ......................................69

E-mail

Lists........................................ 58

Receive/read ........................... 58

Setting s .................................. 59

Write ...................................... 57

Emergency number .................... 12

Extras............................... 104, 120

138

Index

Key tones ................................... 84

Network

Barrin g ....................................9 1

Connection .............................92

Settings ..................................9 2

Notes........................................1 01

Language ................................... 77

Limit (call time/charge)............... 39

Logo........................................... 77

Loss of phone, SIM car d ............ 121

Only ‚ .....................................9 0

Only this SIM ..............................9 0

Operating times (battery).... 10, 121

Organiser....................................98

Own (p hone) numbers................3 7

Own greetin g..............................7 8

Mailbox...................................... 60

Maintenance of phone.............. 120

Media Player............................. 110

Controls.................................. 14

My men u ................................ 95

Speed diallin g ......................... 17

Menu speed dialling ................... 16

Menu tree ................................ 127

Message

CB .......................................... 68

E-mail ..................................... 57

MMS....................................... 49

SMS.................................. 43, 45

Message memory full. ................ 48

Message type ............................. 47

Microphone on/off................ 28, 41

Minute beep............................... 83

Missed appointments ............... 101

Missed calls (call list) .................. 38

MMS

Lists........................................ 54

Receiv e ................................... 53

Send....................................... 52

Write ...................................... 49

Mobile Phone Manager............. 113

Muting (microphone) ........... 28, 41

My menu.................................... 95

My phone................................... 23

Phon e (settings)..........................8 4

Phone code.................................1 7

Phone data ...............................121

Phon e identity number (IMEI)......8 4

Phon e number transmission

on/off .........................................8 2

Phon ebook

Additional books .....................3 7

call an entry ............................3 6

Ne w entr y ...............................3 5

Protec ted SIM..........................3 7

VIP numbers............................3 7

Pictures & sounds (SMS)..............4 4

Change ...................................1 7

Control....................................1 7

Enter.......................................1 2

Error .....................................1 17

PIN2 ...........................................1 7

Preferred network.......................92

Preventing accidental activation .... 18

Product data .............................121

Index

139

Profiles

MMS....................................... 55

SMS

Archive ...................................4 6

Lists ........................................4 6

Profiles....................................4 7

Read .......................................4 5

Settings ..................................4 7

Signature ................................4 7

T9 input ..................................2 0

To group .................................4 4

Write.......................................4 3

SMS push....................................4 2

SOS ............................................1 2

Sound recorder .........................1 05

Sp eci al characters .......................1 9

Speech time (battery) ...............1 21

Speed diall ing keys......................9 7

Stan dard functions......................1 5

Standby mode ............................1 4

Standby time ...................... 10, 121

Start up animation ......................7 8

Stop watch ................................1 07

Storage l ocation (Phonebook) .....3 5

Surf & fun ...................................6 9

Swap ..........................................2 6

Switch off phone

Phone..................................... 74

SMS........................................ 47

WAP ....................................... 71

Prompt....................................... 25

Provider log o .............................. 77

PUK, PUK2.................................. 17

Questions & Answers................ 115

Records ...................................... 38

Redial......................................... 24

Reminder ................................... 25

Remote synchronisation ........... 108

Ringtone settin g ......................... 80

Ringtone s ............................. 34, 80

Safety precautions........................ 3

Screensaver................................ 77

Second phone number ............... 92

Security...................................... 17

Service centre (SMS)................... 47

Service supplier portal ................ 23

Service tone s .............................. 84

Set time/date.............................. 86

Settings...................................... 74

Short message (SMS).................. 43

Shown in the display .................... 7

Shut down animation ................. 78

Siemens City Porta l ..................... 23

Signal strengt h ........................... 13

Silent alert.................................. 80

SIM card

Au tomati c ...............................8 4

Manually.................................1 2

Switch on phone.........................12

Symbols........................................7

Synchronisation ........................1 08

T9 text entry ...............................2 0

Tasks ........................................1 00

Technical data...........................1 21

Text entry

Clear barring........................... 18

Insert........................................ 9

Problems .............................. 115

SIM services (optional).............. 104

With T9 ...................................2 0

Without T 9 ..............................1 9

Text module ...............................20

Time zones ................... 12, 86, 103

Topics.........................................76

140

Index

Unanswere d ............................... 82

Unit converter .......................... 106

Upper and lowercase letters........ 19

User group ................................. 93

Validity, SMS .............................. 47

Voice message (mailbox )............ 60

Volume

Handset volume...................... 24

Profiles ................................... 74

Ringtone................................. 80

Wallpaper (display)..................... 77

WAP ........................................... 69

Transcend Information TS64GSSD25S M User Manual
Toshiba 2 Tb 35 HDD2J95 User Manual
Seagate ST3146807FC User Manual
Seagate ST3541A User Manual (1)
Samsung TS H663L User Manual
Samsung Spinpiont HM060HC User Manual
Samsung GH68 04310A User Manual
Salton FCM12SS User Manual
Nokia Intellisync 92 User Manual
Nokia C5 04 User Manual