TrekStor CK 7W User Manual

Advanced Car Kit CK-7W

User Guide

Installation Guide

9310692

Issue 5 EN

Contents

For your safety......................... 4 3. Putting the Advanced

Car Kit into service................. 17

Introduction ............................. 5

Your Nokia Advanced Car Kit

CK-7W...................................................... 5

Bluetooth wireless technology.......... 6

Bluetooth passcode............................... 6

Connecting a mobile phone

using Bluetooth wireless

technology............................................. 17

Pairing using a Bluetooth

passcode................................................. 17

Automatic pairing with

a compatible mobile phone .......... 18

Connecting a mobile phone

1. Getting started..................... 7

Overview .................................................. 7

Use of enhancements........................... 7

Phone holder ....................................... 8

Antenna coupler................................. 8

GSM antenna ...................................... 8

over the data cabl e ............................. 18

4. Operatio n ............................ 19

Remote control button ...................... 19

Switching the Advanced

2. Installation ........................... 9

Safety information................................ 9

Configuration........................................ 11

Connecting a mobile phone

using Bluetooth wireless

technology ......................................... 11

Connecting a mobile phone

Car Kit on/off........................................ 20

Operating the Advanced Car Kit ..... 20

Accepting a call................................ 20

Ending a call...................................... 20

Rejecting a call................................. 20

Making a call..................................... 20

Redialling ........................................... 21

Voice dialling..................................... 21

Adjusting the volume...................... 21

Manual search for Bluetooth

devices................................................. 21

Resetting paired Bluetooth

devices................................................. 21

Switching from handsfree mode

to the mobile phone........................ 22

using the data cable and

a phone holder.................................. 12

Installing the Advanced Car Kit....... 12

Handsfree unit.................................. 13

Remote control button................... 13

Loudspeaker....................................... 14

Microphone........................................ 14

Cable set............................................. 15

Data cable.......................................... 16

Charger cable.................................... 16

Function test......................................... 16

Care and maintenance ........... 23

F o r y o u r s a f e t y

For your safety

Read these simple guidelines. Breaking the rules may be dangerous or illegal.

Further detailed information is given in this user guide.

Keep all miniature SIM cards and accessories out of the reach of small children.

ROAD SAFETY COMES FIRST

Remember that the safety of operating a motor vehicle in traffic

requires the full attention of all motorists. Only use your Advanced

Car Kit if traffic conditions permit safe use and check if local laws/

regulations restrict the use of mobile phones while driving.

INTERFERENCE

All wireless phones may get interference, which could affect

performance.

QUALIFIED INSTALLATION AND SERVICE

Only a qualified professional may install or repair phone equipment.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read the relevant user guide

for detailed safety instructions. Do not connect incompatible

products.

FUSE REPLACEMENT

Replace a blown fuse with a fuse of the same type and size. Never use

a fuse with a higher rating!

I n t r o d u c t i o n

Introduction

■ Your Nokia Advanced Car Kit CK-7W

Advanced Car Kit equipment installation in the cockpit

The Nokia Advanced Car Kit was developed for installation in motor

vehicles to enable handsfree operation of mobile phones and use of

individual phone features.

A special emphasis was placed on quick and easy installation. A mobile

phone can be connected to the Advanced Car Kit in one of two ways:

using an optional phone holder with a cable or over a Bluetooth wireless

connection.

In some countries, use of the Advanced Car Kit may be restricted by law.

Please observe the applicable rules/regulations.

I n t r o d u c t i o n

■ Bluetooth wireless technology

Bluetooth wirteless technology is an international standard for short-

range wireless communication. It allows you to establish a wireless

connection within a range of 10 metres between your Advanced Car Kit

and a compatible device.

The Advanced Car Kit is intended for use with any mobile phone that

supports the Bluetooth Handsfree Profile (Bluetooth HFP).

The wireless connection between the compatible devices established

using Bluetooth technology is free of charge for the user. In some

countries, there may be restrictions on using Bluetooth devices. Check

with your local authorities.

■ Bluetooth passcode

The first time you wish to establish a wireless connection to a

compatible device using Bluetooth technology, you will need to input a

passcode to pair the devices.

The passcode is 0000.

G e t t i n g s t a r t e d

1. Getting started

■ Overview

The Advanced Car Kit includes the components shown above.

• 1 Handsfree unit HF-5 with mounting plate MK-2

• 2 Remote control button CU-7

• 3 Loudspeaker HFS-12

• 4 Microphone MP-2

• 5 Cable set PCU-4

• 6 Data cable CA-27

• 7 Charger cable CA-116

■ Use of enhancements

Depending on the setup, a variety of optional enhancements are

available to extend your Advanced Car Kit. Before any installation work

is started, ask for professional advice on the enhancements that would

G e t t i n g s t a r t e d

best suit your needs. Use only approved enhancements. Ensure that only

compatible products are connected to your Advanced Car Kit.

Phone holder

You will need a phone holder designed for a compatible mobile phone if

the mobile phone is to be connected direct to the handsfree unit using

the data cable.

Antenna coupler

An antenna coupler is required to connect an external antenna. A range

of antenna couplers are commercially available for the mobile phones

and phone holders on the market. An antenna coupler improves in-

vehicle reception of the mobile phone.

GSM antenna

A compatible GSM antenna enables optimised wireless connections.

If you have installed an external antenna, remember that in order to

comply with RF exposure requirements for mobile transmitting devices,

a minimum distance of 20 cm must be maintained between the antenna

and all persons.

I n s t a l l a t i o n

2. Installation

■ Safety information

The basic safety guidelines set out below are to be observed when

installing the Advanced Car Kit .

Note:

• Only qualified personnel should service the Advanced Car

Kit or install it in a vehicle. Faulty installation or service

may be dangerous and may invalidate any warranty which

may apply to the unit.

• The Advanced Car Kit may only be installed by a qualified

service technician using the approved original Nokia parts

supplied in the sales package. End users should remember

that the Advanced Car Kit comprises complex technical

equipment that requires professional installation using

special tools and expert know-how.

• Note that the instructions contained in this installation

guide are general guidelines which apply for the

installation of the Advanced Car Kit in an automobile.

However, due to the wide variety of car types and models

available on the market, this guide cannot consider the

individual technical requirements relevant for any

particular vehicle. Contact the vehicle manufacturer for

further detailed information about the vehicle in question.

• The Advanced Car Kit is suitable for use only in vehicles

with a 12 volts negative grounding. Use on other supply

voltages all alternative polarity will damage the

equipment.

• Remember that modern automotive systems include on-

board computers where key vehicle parameters are stored.

Improper disconnection of the car battery may cause loss

of data, necessitating extensive effort for re-initialisation

I n s t a l l a t i o n

of the system. If you have any concerns, contact your car

dealer before any installation work is done.

• Do not wire Advanced Car Kit equipment to the high-

voltage lines of the ignition system.

• All equipment must be mounted so that it does not

interfere with the operation of the vehicle.

• Your service technician may be able to provide you with

information on alternatives for mounting the equipment

suitably in your vehicle without requiring boreholes.

• The mount for the phone holder is to be fixed to the

dashboard or to any other location in the cockpit area

where the display is clearly visible for the user but does not

impair control or operation of the vehicle. The keypad

should be within easy reach of the driver.

• Make sure not to impact the steering or braking systems or

other key systems essential for proper operation of the car

when installing Advanced Car Kit equipment. Check to

make sure that deployment of the airbag is not blocked or

impaired in any way.

• Do not smoke when working on the car. Make sure that

there is no source of fire or flame nearby.

• Take care not to cause damage to electrical cables, fuel or

brake lines or safety equipment during installation work.

• RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles (e.g.

electronic fuel injection systems, electronic anti-skid

braking systems, electronic speed control systems, airbag

systems). Should you note a fault or change in the

operation of such a system, contact your car dealer.

• Ensure that cables are placed so that they will not be

subjected to mechanical wear and tear (e.g. not laid under

car seats or over sharp edges).

I n s t a l l a t i o n

■ Configuration

In principle, the Advanced Car Kit offers two different basic

configurations for installation:

Connecting a mobile phone using Bluetooth wireless

technology

To be able to establish a connection from a compatible mobile phone to

the handsfree unit, both devices first have to be paired.

A compatible mobile phone supporting Bluetooth wireless technology is

required for this setup.

I n s t a l l a t i o n

Connecting a mobile phone using the data cable and a

phone holder

When connected via the data cable, the compatible mobile phone is

ready for operation with the Advanced Car Kit when placed into the

phone holder.

Depending on your mobile phone and your vehicle equipment,

enhancements such as a phone holder, antenna coupler or external

antenna may be required.

■ Installing the Advanced Car Kit

See “Introduction,” p. 5 for an example of a suitable installation of the

Advanced Car Kit equipment.

I n s t a l l a t i o n

Handsfree unit

When installing the handsfree unit, ensure that the cables for the

microphone and loudspeaker will reach the places you intend to mount

these components.

Take care not to mount the handsfree unit inside a closed metal housing

or in a place in the car where it would be shielded from radio waves as

this may impair the use of the Bluetooth feature.

To mount the unit, first attach the mounting plate supplied with the

Advanced Car Kit and then secure the handsfree unit using the screw

that goes through the unit. Finally, insert the cover imprinted with the

Nokia logo into the recess and press it into place.

Remote control button

The remote control button should be located so that it is within easy

reach of the user. However, ensure that it is placed so that the cable for

connection to the handsfree unit can be mounted. A suitable mounting

position for the remote control button may be on the console between

the front seats.

I n s t a l l a t i o n

To mount the remote control button, use the hook and loop tape

provided. First detach the two parts of the pads from each other. Attach

the pad with the loops first: peel off the protective sheet from the

adhesive side (A) and attach the pad to the desired location in your car

(B). Make sure that the surface where you intend to attach the pad is dry

and free from dirt and dust.

Attach the pad with the hooks next: peel off the protective sheet from

the adhesive side (C) and attach the pad to the underside of the remote

control button.

Press the remote control button (D) firmly onto the loop pad mounted in

the car.

Loudspeaker

To ensure good acoustic quality, mount the loudspeaker so that it is

pointed in the user’s direction. We recommend that you mount the

loudspeaker a minimum distance of 1 metre away from the microphone

to avoid feedback.

The Advanced Car Kit also supports connection to a compatible car radio

system. If you wish to use the car radio installed in your vehicle with the

Advanced Car Kit for audio output, ask your service technician for

professional advice.

Connect the loudspeaker or a compatible car radio system to the

"SPEAKER" output.

Microphone

Careful selection of the mounting location of the microphone can

increase the quality of voice transmission.

Mount the microphone approx. 30 cm from the driver’s head, and

position it so that it points towards the driver’s mouth. Experience has

shown that the best locations are near the rearview mirror or the sun

visor. We recommend that you keep the microphone a minimum

distance of 1 metre away from the Advanced Car Kit phone loudspeaker

to avoid feedback.

I n s t a l l a t i o n

Take care to mount the microphone so that it is not exposed to air

streams from the vents. Do not lay the microphone cable in the heating,

ventilation or AC system. Use the double-sided adhesive tape supplied

to fix the microphone as this will prevent noise from the car body being

transmitted into the interior.

Insert the plug into the "MIC" socket in the handsfree unit and turn it

clockwise to lock it firmly.

Note: Use of any other microphone than the microphone MP-2

supplied with the Advanced Car Kit smay impact the

transmission quality.

Cable set

The wires making up the cable harness are to be connected as per the

wiring diagram.

• Connect the black wire to the vehicle ground (GND).

• Connect the yellow wire to the MUTE connection of the car radio.

If your car radio does not have a mute connection, this line may

remain unconnected. In this case, your car radio will not be muted

automatically during a call.

An additional relay can be used to enable the car radio to be muted.

When a call is accepted, the Advanced Car Kit switches the yellow

line (MUTE) to ground, muting the car radio. When the call is ended,

the yellow line is separated from ground and the car radio is

unmuted.

• Connect the blue wire to the IGNS line of the car using the 1A fuse

supplied.

I n s t a l l a t i o n

Some vehicles do not come with an IGNS connection. This line is not

necessary for operation of the Advanced Car Kit; the blue wire can be

left unconnected. However, in this case, the Advanced Car Kit does

not switch off automatically when the ignition is turned off. To

prevent accidental draining of the car battery, the Advanced Car Kit

automatically switches off after two minutes unless a mobile phone

is connected over Bluetooth wireless technology or the data cable.

• Connect the red wire to the positive terminal of the 12V car battery

using the 2A fuse supplied.

The four-pin plug of the cable set is plugged into the "DC" port of the

handsfree unit.

Data cable

The data cable connects the handsfree unit with a compatible mobile

phone, i.e. via the phone holder.

Plug one end of the cable into the "PHONE" socket in the handsfree unit

and the other into the phone holder.

If the Advanced Car Kit is to be used only with Bluetooth wireless

technology, the data cable does not need to be connected.

Charger cable

The charger cable allows you to charge a compatible mobile phone

while it is connected to the Advanced Car Kit over Bluetooth wireless

technology.

The charging cable can be used with compatible Nokia devices that have

a 2.0-mm charger connector.

■ Function test

After your Advanced Car Kit has been installed, it needs to be checked to

ensure that it is working properly. When testing the operation of the

equipment, also check that it has been mounted so that it in no way

impairs the driver during operation of the vehicle.

P u t t i n g t h e A d v a n c e d C a r K i t i n t o s e r v i c e

3. Putting the Advanced Car Kit

into service

A compatible mobile phone can be connected to the Advanced Car Kit

in one of two ways: over a Bluetooth wireless connection or using a

compatible phone holder with a cable.

■ Connecting a mobile phone using

Bluetooth wireless technology

The first time you establish a wireless link from your Advanced Car Kit

using Bluetooth technology, you will have to pair the handsfree unit

with the compatible mobile phone that you are using. This only needs to

be done once: after this the devices will automatically recognise each

other and establish the link.

Note: If you wish to establish a connection using Bluetooth

wireless technology, make sure that there is no mobile phone

inserted in the phone holder.

Pairing using a Bluetooth passcode

1. Make sure that the mobile phone is switched on and the battery is

charged.

2. Switch on the Advanced Car Kit. For further information, see

“Switching the Advanced Car Kit on/off,” p 20.

3. Open the Bluetooth menu in the mobile phone and activate the

Bluetooth function.

4. Make the required settings on the mobile phone to activate a search

for Bluetooth devices within range. For further information on the

settings required on your mobile phone, see the relevant user guide.

5. Select Advanced Car Kit from the list of Bluetooth devices found.

6. When prompted, key in the Bluetooth passcode 0000.

P u t t i n g t h e A d v a n c e d C a r K i t i n t o s e r v i c e

7. The mobile phone has now been paired with the Advanced Car Kit

and is ready for operation.

Note: The Advanced Car Kit can only establish a Bluetooth

wireless connection to one compatible mobile phone.

Therefore, you may need to end or break an existing Bluetooth

wireless connection.

Automatic pairing with a compatible mobile phone

1. Make the appropriate settings in the mobile phone so that it will pair

with your Advanced Car Kit without requiring separate acceptance

or authorisation. For further information on the settings required on

your mobile phone, see the relevant user guide.

2. Switch on the Advanced Car Kit.

3. The Advanced Car Kit now starts an automatic 30-second search for

mobile phones that have previously been paired with it using the

Bluetooth passcode. The Advanced Car Kit pairs with the mobile

phone that it has last paired with. The active Bluetooth search is

indicated by the flashing light on the remote control button.

■ Connecting a mobile phone over the data cable

If you are using this form of connection, the mobile phone is ready for

use with the Advanced Car Kit when placed into the phone holder; you

do not need to pair the devices.

If a mobile phone is inserted into a phone holder connected to the

Advanced Car Kit via the data cable, this phone is the active device and

you will not be able to establish a connection to any device via

Bluetooth wireless technology. Inserting a mobile phone that is

currently involved in an active Bluetooth wireless connection into a

phone holder connected to the Advanced Car Kit will cause the

Bluetooth wireless connection to be terminated automatically.

O p e r a t i o n

4. Operation

The Advanced Car Kit can be controlled with the remote control button

or operated using the keypad of a compatible mobile phone.

■ Remote control button

1 The button can be used as follows:

• Press

• Press and hold (approx. 1 second)

• Press twice briefly

• Press and hold for a long time (longer than 10 seconds)

2 The ring can be used as follows:

• Turn to the left

• Turn to the right

3 The indicator light has three states:

• On

• Flashing

• Off

O p e r a t i o n

■ Switching the Advanced Car Kit on/off

When you turn on the ignition of your car, you automatically switch on

the Advanced Car Kit. The indicator light goes on to show that the

Advanced Car Kit is activated.

When you turn off the car ignition, you deactivate the Advanced Car Kit

and the indicator light goes off.

If the Advanced Car Kit has been installed without connecting the

ignition sense cable (IGNS), to switch the Advanced Car Kit on, either

press the button briefly or insert a compatible mobile phone in the

phone holder, if one has been installed.

Note: If the Advanced Car Kit has been installed without using

the IGNS cable, when switched on, it will stay in service as long

as a compatible mobile phone remains in the phone holder.

If there is currently no connection to a mobile phone, the

Advanced Car Kit will switch itself off after 2 minutes.

■ Operating the Advanced Car Kit

You can use the remote control button to access the following phone

features:

Accepting a call

To accept an incoming call, press the button.

Ending a call

To end an active call, press the button.

Rejecting a call

If you do not wish to accept a call, press and hold the button.

Making a call

Select the desired entry from the phonebook of the mobile phone or key

in the desired number on your mobile phone.

O p e r a t i o n

Redialling

To redial a number that you have recently called, press the button twice

briefly.

Voice dialling

You can use voice tags that you have saved in your mobile phone:

1. To start voice dialling, press and hold the button until you hear a

tone.

2. Say the voice tag.

3. The mobile phone plays the voice tag and dials the corresponding

phone number.

For details on using voice dialling, see the user guide of your mobile

phone.

Note: Some mobile phones may not support all the functions

described in this user guide.

Adjusting the volume

To adjust the loudspeaker volume, turn the ring.

Manual search for Bluetooth devices

If you have not established a connection to a mobile phone, you can

start a manual search for a mobile phone that supports Bluetooth

wireless technology.

To activate the Bluetooth search feature in the Advanced Car Kit, press

and hold the button.

If the search for Bluetooth devices is active, the indicator light will begin

flashing.

Resetting paired Bluetooth devices

The Advanced Car Kit saves the last 7 Bluetooth devices that it has been

paired with.

O p e r a t i o n

The list of paired Bluetooth devices can be erased. To erase the list, the

Advanced Car Kit must be switched off (indicator light goes off):

Press and hold the button until a signal tone indicates that the list has

been erased.

Switching from handsfree mode to the mobile phone

• If you have connected a compatible mobile phone to the Advanced

Car Kit using the data cable, take the phone out of the holder to

switch operation from handsfree mode over to the mobile phone.

• To change back to handsfree mode, replace the mobile phone in the

holder. The mobile phone is now used in handsfree mode via the

Advanced Car Kit.

• If you have connected a compatible mobile phone to the Advanced

Car Kit using Bluetooth technology, you can switch the active call

between the Advanced Car Kit and the mobile phone or vice versa.

Press and hold the button or use the corresponding function in your

mobile phone.

C a r e a n d m a i n t e n a n c e

Care and maintenance

Your Advanced Car Kit is a product of superior design and craftmanship and

should be treated with care. The suggestions below will help you to fulfil any

warranty obligations and to enjoy this product for many years.

•

Keep all enhancements out of the reach of small children.

Keep the Advanced Car Kit dry. Precipitation, humidity and all types of liquids

or moisture can contain minerals that will corrode electronic circuits.

•

Do not use or store the Advanced Car Kit in dusty, dirty areas. Its moving parts

can be damaged.

Do not attempt to open the Advanced Car Kit. Non-expert handling may

damage it.

Do not use harsh chemicals, cleaning solvents or strong detergents to clean

the Advanced Car Kit or the remote control button.

Do not paint the Advanced Car Kit or the remote control button. Paint can

clog the moving parts and prevent proper operation.

If the Advanced Car Kit or the remote control button is not working properly, take

the defective part to your nearest qualified service facility. The personnel there

will assist you and, if necessary, arrange for service.

Sony Ericsson IIDA G11 User Manual
Sony Dream Machine ICF C218 User Manual
Seagate DB35 SERIES 72002 ST3802110ACE User Manual
Seagate CONSTELLATION ST33000651SS User Manual
Samsung Spinpiont F1 HD161GJ User Manual
Samsung SCH 8500 User Manual
Samsung Computer Drive HX DU010EC User Manual
Polycom Cell Phone 6020 User Manual
Philips FLAT TV 52PFL5432 User Manual
Panasonic EBH63 User Manual